SMALL  DWDM

Cassio  Gomes
Systems  Engineer
November,  2017
Agenda

• Cisco  NCS 2000  Small  DWDM

• Cisco  OADM Solution
• Cisco  ROADM Solution
• Router  IP/MPLS
• Cisco  Management  System
• Cisco  RFQ Solution
Small  DWDM
Cisco  NCS  2000  Family
Chassis
NCS  2015 NCS  2006 NCS  2002

• 15  usable  slot  in  the  chassis • 6  usable  slot  in  the  chassis • 2  usable  slot  in  the  chassis
• 14  Rack  Units • 6  Rack  Units • 2  Rack  Units
Cisco  NCS 2000  Family
Transponders  – 10G
10G  Trunk  Mode

• 5x10G  Transponders  per  Slot

• Fixed  and  Tunable  SFP+  support
• OTU-­2,  OC-­192,  10GE
• Regeneration 10G  DWDM SFP+
10G Client 10G DWDM
Cisco  NCS 2000  Family
Transponders  – 100G
100G  Trunk  Mode
• 1x100G  Transponder  per  Slot
• Tunable  support
• Combinations:
A. 1x100G  – 1x100G  Client  in  the  same  Slot
B. 10x10G  – 10x10G  Paired  Muxponder Card

Transponder Muxponder

100G  Client 100G  DWDM 10x10G  Client

Cisco  NCS 2000  Family
Transponders  – 200G
200G  Trunk  Mode
• 1x200G  Transponder  per  Slot
• Tunable  support
• Combinations:
A. 2x100G  Clients  – 1x100G  Client  in  the  same  Slot  +  1x100G  Paired  Muxponder Card
B. 1x100G  +  10x10G  – 1x100G  Client  in  the  same  Slot  +  10x10G  Paired  Muxponder Card
C. 20x10G  – 10x10G  in  the  first  Muxponder +  10x10G  in  the  second  Muxponder Card

Muxponder Transponder Muxponder

100G  Client 10x10G  Client 100G  Client 100G  DWDM 10x10G  Client
Cisco  NCS 2000  Family
Transponders  – 400G  OTN
Double  Slot  NCS 2000  Line  Card
• 6x  QSFP+  for  40G  and  10G  Clients  (Fan  Out)
• 4x  QSFP-­28/QSFP+  for  100G,  40G  and  10G  Clients  (Fan  Out)
• 2x  CFP2  for  WDM Trunk
OTN XPonder,  Muxponder and  Transponder  capabilities  supported
• Any  Mix  of  40x  10GE  /  4x  100GE/OTU4  over  2x  200G  16-­QAM  wavelengths
• Any  Mix  of  30x  10GE  /  3x  100GE/OTU4  over  2x  150G  8-­QAM  wavelengths
• Any  Mix  of  20x  10GE  /  2x  100GE/OTU4  over  2x  100G  QPSK wavelengths
Single  Line  Card  Regeneration  solution  (CFP2  to  CFP2)
Cisco  NCS 2000  Family
OTN Switching  Functionality
10GE  Services

L B
X
N H

400G  OTN   200G   400G  OTN   200G   400G  OTN   200G   400G  OTN  
XPonder WDM WDM WDM
XPonder XPonder XPonder

F D

Q
 ODU2  Xconnect XPonder Configuration  
• The  2x  WDM  Trunk  can  be  used  to  Share  capacity  across  different  Nodes  in  a  Network  when  
the  Line  Card  is  operated  in  OTN  XPonder mode
• Clients  can  be  mapped  to  the  wavelengths  through  the  OTN  Engine,  which  provides  OTU2  
granularity
• Architecture  supports  standard  based  1+1  SNC  Protection  for  Ring-­based  topologies

200G  WDM   200G  WDM  

Trunk CFP2 OTN  Engine CFP2 Trunk

Up  to  20x  10GE  Clients  can  be  individually  Terminated  with  the  
Line  Card  operating  in  XPonder mode  with  200G  WDM  
Wavelengths
NCS2K-­MF-­8X10G-­FO

400G-­XP
• The  module  is  full  height  for  the  mechanical  bracket  NCS2K-­MF-­1RU
1 4

QSFP+ QSFP+
It  fits  also  into  any  slots  of  the  NCS2K-­MF10-­6RU  chassis  (GdT)

QSFP+ QSFP+ QSFP+

•
2 5

• 2x  MPO12  +  8x  Dual-­LC  Optical  Adapters   3 6

QSFP+
7

QSFP28 QSFP28 QSFP28 QSFP28

11

QSFP+ QSFP+ QSFP+ QSFP+

PORT-­‐1-­‐1 PORT-­‐2-­‐1 PORT-­‐3-­‐1 PORT-­‐4-­‐1 COM-­‐1
MPO-­12Fibers

TRUNK1
TX RX TX RX TX RX TX RX
8

9 12

MPO-­12Fibers
PORT-­‐1-­‐2 PORT-­‐2-­‐2 PORT-­‐3-­‐2 PORT-­‐4-­‐2 COM-­‐2
INV ACTV

TRUNK2
TX RX TX RX TX RX TX RX
10
ATTN

LC-­LC  connection  to  10GE-­LR  clients

Cisco  NCS 2000  Family
Linecards and  Chassis  Compatibility

Linecards NCS 2002 NCS 2006 NCS 2015

Muxponder 10x10G  Card YES YES YES

Transponder  200G Card YES YES YES

400Gbps  Xponder Card NO YES YES

ROADM  SMR-­1 (2  Degrees) YES YES YES

ROADM  SMR-­2 (4  Degrees) YES YES YES

ROADM  SMR-­9 (9  Degrees) NO YES YES

ROADM  SMR-­20 (20  Degrees) NO YES YES

Cisco  NCS 2000  Family
Temperature

Modules Operating  Temperature

Chassis  NCS 2000 55°C

TNC – Transport  Node  Controller 65°C

Transponder  100G/200G Card 40°C  / 55°C  Short  term

Muxponder 10x10G  Card 40°C  / 55°C  Short  term

400Gbps  Xponder Card 40°C  / 55°C  Short  term

Amplifiers 55°C

Short-­term  temperature  -­5ºC  to  55ºC  refers  to  a  period  of  not  more  than  96  consecutive  hours  and  a  total  of  not  more  than  15  days  in  1  year  (a  
total  of  360  hours  in  any  given  year,  but  no  more  than  15  occurrences  during  that  1-­year  period)
OADM Solution
 Edge  DWDM Product  Enhancement
Photonic  Goals

• Integrate  with  MSTP  System  

• Lower  CapEx

• Reduce  footprint  (Lower  OpEx)

Passive  Edge  DWDM  Ring
• 100%  Passive  (Thin  Film)

• Easy  &  Simple  Cabling

• Fiber  Guilds  for  Protection  and  Bend  Radius   ONS

• Full  8  channel  East/West  Add/Drop  in  1RU DWDM  SFP  /  XFP

4ch
• Both  CWDM  and  DWDM  Capabilities   OADM

15
 4  Channel  Edge  OADMs
15216-­FLD-­4-­XX.X=

§ 10  units  x  4  channels  each  to  

complement  MD-­40
§ USB  Passive  Inventory
§ Many  uses
Ch  1..  4  TX

§ Low  channel  count  P-­to-­P

§ ‘Fixed’  OADM  Ring  Designs COM-­‐RX
4  Chs
ADD EXP-­‐TX

MON-­‐RX

§ Low  channel  count  drop  from   COM-­‐TX

4  Chs
DROP
EXP-­‐RX

Single  Module  ROADM MON-­‐TX

Ch  1..  4  RX
Edge  DWDM Product  Enhancement
Sample  Mechanical:  4ch  100GHz  OADM

4ch  OADM USB  Type  A

4  x  4ch  OADM  into  1RU Connector
§ Straight  LC  Connectors

§ Plastic  cover  to  protect  fibers

§ 1%  Monitor  Tap  Port

§ USB  Passive  Inventory

17
Edge  DWDM Product  Enhancement
Architecture

MSTP • Full  MSTP  40ch  Support

OSC
OSC
• OSC  Add/Drop  Support

• Optical  By-­Pass  Support

• Bring  CWDM  Support  to  MSTP

4ch • CTC  Support

OADM

• CTP  Support
MSTP
Optical  
By-­
Pass

4ch
OADM
18
DCU Solution
 Dispersion  Compensation  Units
• Features
• External  Pizza  box  shelf  1RU  height  (DCU-­SA)
• Pluggable  in  23”  or  19”  ANSI  Bay  Frames  and  600x300  ETSI Racks
• Front  Panel  LC-­PC-­II  optical  connectors
• Up  to  2  DCU units  can  be  housed  in  the  shelf
• Different  module  types  available  (DCU-­xxx)  to  compensate  for  different  span  lengths  &  different  fiber  types:

DCU  PID DCU Description DCU  PID DCU Description

DCU-­100= SMF  – C-­band  – 100ps/nm  CD  compensation DCU-­E-­200= E-­LEAF  – C-­band  – 200ps/nm  CD  compensation
DCU-­350= SMF  – C-­band  – 350ps/nm  CD  compensation DCU-­E-­350= E-­LEAF  – C-­band  – 350ps/nm  CD  compensation
DCU-­450= SMF  – C-­band  – 450ps/nm  CD  compensation
DCU-­L-­300= SMF  – L-­band  – Dispersion  Compensation  Unit  300ps/nm
DCU-­750= SMF  – C-­band  – 750ps/nm  CD  compensation
DCU-­L-­600= SMF  – L-­band  – Dispersion  Compensation  Unit  600ps/nm
DCU-­950= SMF – C-­band  – 950ps/nm  CD  compensation
DCU-­L-­700= SMF  – L-­band  – Dispersion  Compensation  Unit  700ps/nm
DCU-­1150= SMF  – C-­band  – 1150ps/nm  CD  compensation
DCU-­L-­800= SMF  – L-­band  – Dispersion  Compensation  Unit  800ps/nm
DCU-­1350= SMF  – C-­band  – 1350ps/nm  CD  compensation

DCU-­1550= SMF  – C-­band  – 1550ps/nm  CD  compensation DCU-­L-­1000= SMF  – L-­band  – Dispersion  Compensation  Unit  1000ps/nm

DCU-­1950= SMF – C-­band  – 1950ps/nm  CD  compensation DCU-­L-­1100= SMF – L-­band  – Dispersion  Compensation  Unit  1100ps/nm
 Dispersion  Compensation  Units
Module Compesation Max  Loss Fiber  Length
DCU-­100 100ps/nm 2.1dB .95  KM
DCU-­350 350ps/nm 3.0dB 3.33  KM
DCU-­450 450ps/nm 3.5dB 4.28  KM
DCU-­550 550ps/nm 3.9dB 5.24  KM
DCU-­750 750ps/nm 5.0dB 7.14  KM
DCU-­950 950ps/nm 5.5dB 9.05  KM
DCU-­1150 1150ps/nm 6.2dB 10.95  KM
DCU-­1350 1350ps/nm 6.4dB 8.2KM
DCU-­1550 1550ps/nm 7.2dB 9.4KM
DCU-­1950 1950ps/nm 8.8dB 11.8KM
DCU-­E-­200 200ps/nm 5.5dB 4.5  KM
DCU-­E-­300 300ps/nm 7.0dB 7.1KM
DCU-­L-­300 300ps/nm 3.0dB 2.5  KM
DCU-­L-­600 600ps/nm 4.2dB 5.0  KM
DCU-­L-­700 700ps/nm 4.6dB 5.8  KM
DCU-­L-­800 800ps/nm 5.0dB 6.7  KM
DCU-­L-­1000 1000ps/nm 5.8dB 8.2  KM
DCU-­L-­1100 1100ps/nm 6.0dB 9.2KM
ROADM Solution
ROADM Solution  – SRM-­1  and  SMR-­2

SMR-­1 SMR-­2
• ROADM &  Integrated  Pre-­Amp • ROADM  +  Integrated  Pre  &  Post  Amp  
• Significant  Cabling  Reduction   • Significant  Cabling  Reduction
• 45%  Space  &  Power  Reduction • 50%  Space  &  Power  Reduction
• 40  Channels  – 2  Degrees • 40  Channels  – 4  Degrees
• Integrated  OSA • Integrated  OSA

Easily  migration  from  OADM solution  to  ROADM keeping  the  same  modules,
Included  ADD/DROP  Passive  module.  The  chassis  is  the  same.
Single  Module  ROADM

EDFA • EDFA,  ROADM,  OSA combined

• Only  one  slot  required  per  degree

• 4-­Degree  and  cost-­optimized  2-­

Degree  versions
ROADM • Very  few  fibers  required,  minimize  
complexity
• Thousands  in  service

OSA
Single  Module  ROADM
§ Form  Factor
§ 40ch  ROADM  +  Amplifiers  in  a  single  slot  card
§ Leaves  room  for  service  line  cards  and  for  ROADM  in  
smaller  footprints

§ Price-­Point
§ Allows  for  ROADM  anywhere  (and  everywhere)
§ Pay-­As-­You-­Grow  pricing  option

§ Simplicity
§ Very  few  patch  cords  required

§ Two  Versions:
§ SMR-­2
40ch 4-­Degree  ROADM
ROADM +  Pre  +  Booster  Amplifiers
§ SMR-­1
40ch 2-­Degree  ROADM
ROADM +  Pre-­Amplifier
Public  References
Cisco  Network  Convergence  System  2000  Series  Data  Sheet
https://www.cisco.com/c/en/us/products/collateral/optical-­networking/network-­convergence-­system-­2000-­series/data_sheet_c78-­729221.html

Cisco  10GBASE  Dense  Wavelength-­Division  Multiplexing  SFP Modules  Data  Sheet

https://www.cisco.com/c/en/us/products/collateral/interfaces-­modules/dwdm-­transceiver-­modules/data_sheet_c78-­711186.html

Cisco  NCS 2000  200-­Gbps  Multirate DWDM  Line  Card  Data  Sheet
https://www.cisco.com/c/en/us/products/collateral/optical-­networking/network-­convergence-­system-­2000-­series/datasheet-­c78-­733699.html

Cisco  NCS 2000  400  Gbps XPonder Line  Card  Data  Sheet  – OTN Switching  Application
https://www.cisco.com/c/en/us/products/collateral/optical-­networking/network-­convergence-­system-­2000-­series/datasheet-­c78-­736916.html

Pluggable  Optical  Modules:  Transceivers  for  the  Cisco  ONS  Family

https://www.cisco.com/c/en/us/products/collateral/optical-­networking/network-­convergence-­system-­2000-­series/datasheet-­c78-­736938.pdf
Low  Speed  DWDM  Client  
Interfaces
 Any-­Rate  Xponder Card
Ultimate  Flexibility  for  DWDM Aggregation  and  Transport

8  x  SFP,  2  x  XFP  ports Unprotected  /  Protected

Ethernet:  FastE,  GigE

2.5G OTU-­2
SAN:  1G,  2G,  4G,  8G
10G OTU-­3
SDI  Video:  SD,  HD,  3G
Transparent

TDM:  OC-­3/12/48,  OTN

Transponder    /  Muxponder Pay-­As-­You-­Grow

©  2010  Cisco  and/or  its  affiliates.  All  rights  reserved. Cisco  Confidential 28
 Any-­Rate  Xponder Card
Ultimate  Flexibility  for  DWDM Aggregation  and  Transport

§ 8  x  SFP  and    2  x  XFP  ports

§ Transponder  – Protected  or  Unprotected
§ Up  to  four  1G,  2G,  4G
§ One  8G or  10G
§ Muxponder  – Protected  or  Unprotected
§ N  into  2.5G
§ N  into  10G
§ Pay-­As-­You-­Grow,  Per  Feature  Pricing
§ 20G and  40G versions  of  card
§ Licensed  and  Unlicensed  versions

©  2010  Cisco  and/or  its  affiliates.  All  rights  reserved. Cisco  Confidential 29
Router  IP/MPLS
 Cisco ASR 9006 Overview
Features Description
Total  Capacity 7  Tbps

Capacity  per  Slot 880  Gbps/Slot  (with dual  RSPs)

Slots 6  slots:  4  Line cards,  2  RSPs

Rack  Size 10  RU
Version 2:    2.1  KW  DC  /  3.0  KW  AC  supplies  (4/system)
Power
Version  3:    4.4  KW  DC  /  6.0  KW  AC  supplies  (4 (DC),  3  (AC)/system)

Fan 2  Fan  Tray, Side-­to-­Back  Airflow  (optional  baffle  for  Front-­to-­Back Airflow)

RSP RSP440,  RSP880,  1+1  redundancy

High  Density  Fixed
100G:  1X100GE,  2X100GE  ,  4X100GE,  8X100GE    
10G:  24X10GE,  36X10GE  
Modular
MOD80,  MOD160,  MOD200,  MOD400
Line  cards MPAs:  20xGE,  4x10G,  8x10G,  2x40G,  1x100G,  20x10G,  2x100G
Low  Density  Fixed
40x1GE,  4x10G+16x1GE
TDM/Legacy  Interfaces:  SIP-­700  (POS,  Channelized  SPAs)
Service  Card:    Virtualized  Service  Module  (VSM)
 Cisco ASR 900 Overview
• Compact • Scalable
• Fits  in  300mm  cabinets  (235mm  deep) • RSP  :  up  to  400Gbps  with  services  at  different  scale

• Reliable • Ethernet  :  1x100GE,  2x40GE,  8x10/1GE,  2x10GE,  

• Extended  operating  temp.  range  -­40  to  65  C 1x10GE+8x1GE  and  8x1GE
• Redundant  PSUs,  FANs  and  RSPs • TDM/ATM:  4x  STM1  /  1x  STM4  

• ISSU • Feature  rich

• Modular • Carrier  Ethernet:  EVC,  E-­OAM,  Y.1731,  HQoS

• Upgradable  RSP  and  Interfaces • Layer3+:  MPLS VPN,  MPLS-­TP,  VPLS

• Flexible  Interface  Module  selections • Timing:  SyncE,  IEEE  1588-­2008,  BITS,  GNSS

• Capable • Advanced  QoS capability

• OAM:  Y.1731,  IP-­SLA  ,  CFM,  Link  OAM,  MPLS  OAM
• Hardware:  Cisco  Carrier  Ethernet  ASIC
• Software:  Cisco  IOS-­XE (Carrier  Grade  OS)
• Manageable
• Local  USB,  Serial  and  Ethernet  Console  ports
• 4  Dry  input  contact  ports  on  the  FAN  tray
Cisco ASR 907 – CORE 2
1  Fan  Tray  (redundant  fans)
8  Interface  Modules

2  Route  Switch  Processor  cards

7RU (with  GNSS  receiver)

8  Interface  Modules

4  dry-­contact  alarm  inputs

load-­sharing  Power  supplies

©  2013-­2014    Cisco  and/or  its  affiliates.  All  rights  reserved.
©  2014-­2015    Cisco  and/or  its  affiliates.  All  rights  reserved. Cisco  Confidential 33
Note: AC PSU planned for future release
Cisco ASR 903 – ACESSO 1
2  Route  Switch  Processor  cards Fan  Tray

3RU

6  Interface  Modules Dual  load-­sharing  Power   4  dry-­contact  

supplies  (AC  or  DC) alarm  inputs

©  2013-­2014    Cisco  and/or  its  affiliates.  All  rights  reserved.

©  2014-­2015    Cisco  and/or  its  affiliates.  All  rights  reserved. Note: alternatively a FAN tray with (optional) dust filter can be inserted. Cisco  Confidential 34
Cisco ASR 902 – ACESSO 2
Optional  dust  filter

Fan  Tray
1  Route  Switch  Processor  card

2RU

4  Interface  Modules Dual  load-­sharing  Power   2  dry-­contact  

supplies  (AC  or  DC) alarm  inputs
©  2013-­2014    Cisco  and/or  its  affiliates.  All  rights  reserved.
©  2014-­2015    Cisco  and/or  its  affiliates.  All  rights  reserved. Cisco  Confidential 35
Route  Switch  Processor  (RSP3)
• Single  1.4GHz  Quad-­Core  CPU
• 8Gbyte  DRAM  (ECC  protected) Optional  
GNSS Module
• 8Gbyte  Flash
• 400G  Packet  Switching  capacity
• HW  accelerated  E-­OAM
• Synchronization
• BITS,  1pps,  ToD,  10Mhz
• SyncE,  IEEE  15888
• GNSS  (GPS)  Clocking  (Optional)
• Management  interface
• Management  Ethernet  (RJ45)
• Serial  Console  (RJ45  and  USB)
High  Capacity  Ethernet  Modules
• 8x  10GE
• SFP+  based,  supporting  10GBase-­SR,  -­LR,  -­ER,  -­ZR,  -­BX 8x  SFP+
• Configurable  for  10GE  LAN  PHY  and  OTU2  OTN  Framing  

• 2x  40GE  
• QSFP  based,  supporting  40GBase-­SR4,    -­LR4,  -­ER4
• Configurable  for  40GE  LAN  Phy and  OTU3  OTN  Framing  
2x  QSFP
• 1x  100GE
• CPAK  based,  supporting  100GBase-­SR10,  -­LR4,  -­ER4
• Configurable  for  100GE  LAN  Phy and  OTU4  OTN  Framing

1x  CPAK
High  Density  Gigabit  Ethernet  Module
• 1-­Port  10GE  SFP+/1GE  CSFP  &  8-­Port  1GE/FE  SFP/CSFP  Line  Card
• 10/100/1000  Copper  SFP  support
• SFP/CSFP  FX  support
• SFP/CSFP  SX/LX/ZX  support
• SFP+  SR/LR/ZR  and  WDM

• Capabilities
• Density  increased  from  8  (SFP)  to  18  (CSFP)  GE  Ports
• MACsec for  1G  ports  (Future  – Post  FCS)
• OTU2  framing  on  10GE  port  (Future  – Post  FCS)

• 1GE  Port  Expansion  directly  on  the  Card

• Enables  Oversubscription  on  the  Card
Low  Capacity  Ethernet  Module
• 1-­Port  10GE  SFP+  &  8-­Port  1GE/FE  SFP  Line  Card
• 10/100/1000  Copper  SFP  support
• SFP  FX  support
• SFP  SX/LX/ZX  support
• SFP+  SR/LR/ZR  and  WDM

• Designed  for  Packet  Synchronization  

• SyncE support
• IEEE-­1588-­2008  support

• Rich  Carrier  Ethernet  Feature  Set

1x  SFP+  and  8x  SFP
• EPL/EVPL,  ELAN/EVLAN,  ETREE
• MPLS,  RSVP-­TE  (Bi-­Directional  LSPs)
• E-­OAM
Management  System
 CTC  Views  &  Navigation  

Shelf  View*

Multi-­Shelf  or  Node/NE  View

Network  View

There  are  multiple  ways  to  get  to  a  particular  view…  Navigating  the  various  views  is  as  simple  as  double-­clicking  the  node,  shelf,  or  card,  right-­clicking  
the  object  and  selecting  an  option,  or  using  the  navigation  icons  (top  right).  

Card  View

©  2010  Cisco  and/or  its  affiliates.  All  rights  reserved. Cisco  Confidential 41
Per  Wavelength  Per  Direction  Power  Monitoring

Graphical  display

Fast  wavelength  level  

troubleshooting

Pass-­through and  added  

channel  monitoring

Pass-­through  Wavelength  Equalized  Power  

Added    Wavelength  Equalized  Power
Output  Wavelength  Equalization
Photonic  Path  Trace
 DWDM  Functional  View  /  1
• Available  since  8.5

• Displays  logical  port  connections  between  Amp,  Filter,  and  OSC  units  for  all  available  optical  sides,  based  on  internal  connections  list

• Useful  for  understanding  optical  signal  flow

• Show  TX/RX  power  on  a  connection  

• Rearrange  card  and  link  objects

From  NE  View  Tool  Bar  choose                                icon  **

**  Prior  to  9.0  this  feature  is  located  in  NE  View  >  Provisioning >  WDM-­ANS >  Internal  Connections
DWDM  Functional  View  
Cisco  Transport  Planner
Sites,  Distances,  Fiber  Types,  Service  Demands
Transponders,  
Muxponders,  Xponders
Design
Inputs
Amplifiers

Dispersion  
Compensation  Units

Design
ROADMs
Outputs
Chassis BoM,  Shelf  Layouts,  Optical  Results,  
Installation  Parameters

46
EPN-­M  – Network  Inventory  and  Visualization

Reactive  Network  Inventory Network  topology  on  GIS  map  

Real time status of network resources Inventory information are linked with
to be the single point of truth for all street address and GPS location
Operations
EPN-­M  – Topology  Map
• The  Topology  Map  displays  the  NE’s  in  Location  Groups
EPN-­M  – Device  lifecycle  management

Software  Download Compliance  audit Configuration  Archive

Maintain the network efficient Manage the entire compliance Ensure configuration is
and check for out of date workflow: backed-­up, ready to be
versions Define, Analyze, Detect, restored in case of failures.
Enforce Tracks configuration changes
EPN-­M  – Multi-­Layer  Assurance  and  
Visualization

3D  Multilayer  Map 3D  Multilayer  Circuit  Trace Performance  dashboard

EPNM is able to effectively Allows to navigate each Proactively monitor the

manage different technology circuits and to inspect every performance and store data for
and visualize configuration single point with fault and trend analysis
relationships performance data
EPN-­M  – Configuration  and  Provisioning

Device  configuration Patch-­chord  configuration  

Circuit  Provisionig
and  inventory  

Graphical visualization of rack Patch-­cord inventory and Out of the box, task driven
layout. Device configuration configuration allows to quickly provision for end to end circuit
linked to the chassis view identify wrong connections configuration
EPN-­M  – Fault  Management
• The  Optical  Network  is  continuously  monitored  for  any  fault/event.  And  the  same  is  reported  under  Alarms  
and  Events  page.  Once  the  fault  is  corrected  the  alarm  is  cleared  and  is    reported  under  Cleared  alarm  
page.
• For  NCS2K  these  events  are  captured  via  TL1  and  reported  in  EPNM.
• Fault  Management  in  EPNM  is  done  under  Monitor-­>Monitoring  Tools-­>Alarms  and  Events.
EPN-­M  – Rack and  Chassis  Views
EPN-­M  – Rack  and  Chassis  Views
EPN-­M  Multilayer  Circuit  View

ROUTER

OPTICAL

OPTICAL

ROUTER
EPN-­M  Multilayer  Circuit  Trace  View
Cisco  SOLUTION
IP/MPLS  – CORE  1
Cisco  ASR  9006
10  Rack  Units
6  Slots,  4  for  Interfaces  Modules,  2  for  RSP 12x10G  +  6x1GE  – 160Gbps
12x10G  +  6x1GE  – 160Gbps
880Gbps  per  Slot  (440G  IN  +  440G  out)
FREE
Interface  Modules:
FREE
• 2  modules  24  x  1/10G  (Dual  rate)  Licensed RSP-­440/880

• 16  interfaces  dual  rate  per  slot  Enabled RSP-­440/880

• 8  interfaces  for  future  expansion  via  License

IP/MPLS  – CORE  1
MOD  400  &  MOD  200

• 100G  &  10G  MPAs  for  up  to  400G  &  200G  capacity
• CFP2  based  100G  MPAs  for  SR10,  LR4  &  ER4

Supported  MPAs

• 2x100GE,  1x100G
• 20x10G,  8x10G

Fixed  Line  Card

• 8x100G
IP/MPLS  – CORE  2
Cisco  ASR  907
7  Rack  Units
8x10GE FREE
16  Interface  Modules  Slots,  2  for  RSP FREE 8x1GE
8x10GE FREE
Redundant  RSP3-­400G  per  System FREE 8x1GE
RSP3-­400
Interface  Modules: RSP3-­400
• 2  Modules  8x10G  (12  SFP+) FREE FREE
FREE FREE
• 2  Modules  8x1G  (12  SFP) FREE FREE
FREE FREE
IP/MPLS  – ACCESS  1
Cisco  ASR  903
3  Rack  Units
6  Interface  Modules  Slots,  2  for  RSP
8x1G  +  1x10G
Redundant  RSP3-­400G  per  System 8x1G  +  1x10G RSP3-­400
2x10G
Interface  Modules: FREE RSP3-­400
FREE
• 2  Modules  Combo  8x1G  +  1x10G FREE

• 1  Module  2x10G
IP/MPLS  – ACCESS  2
Cisco  ASR  902
2  Rack  Units
4  Interface  Modules  Slots,  1  for  RSP
8x1G  +  1x10G
Single  RSP3-­200G  per  System 8x1G  +  1x10G RSP3-­200
FREE
Interface  Modules: FREE

• 2  Modules  Combo  8x1G  +  1x10G

Aggregation  DWDM  +  IP  Router  (10G)
Line  Card  10  Interfaces Clients
5  TRUNK  10G ETH/TDM ROADM  SMR-­2
5  CLIENT  10G
One  Board  Per  Direction

EDFA +  ROADM  +  OSA

10G

1RU  External  DCU

1RU  MUX/DEMUX

10G 10G

ROADM  4  Channels ROADM  4  Channels

Aggregation  DWDM  +  IP  Router  (100G)
Embedded  OTN on  a  Blade Clients
One  Board  Per  Direction ETH/TDM ROADM  SMR-­2
2  Trunks  per  Board
Supports  16-­QAM  
Modulation  200G  via  SW

EDFA +  ROADM  +  OSA

10G

1RU  MUX/DEMUX

100G/200G 100G/200G

ROADM  4  Channels ROADM  4  Channels