Assignment 4
Assignment 4
of Technology
ENL-518
Submitted By :
K. Sreehari
MTVD17MVD007
21552
Semester-2
Analog IC Design Laboratory MT17MVD007
Contents
1 Problem statement 2
2 Circuit Parameters 2
2.1 Input Excitation characterstics(applied) . . . . . . . . . . . . . . . . 2
2.2 MOSFET dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3 Simulation Results 3
4 Conclusion 4
List of Figures
1 Frequency Response Curve . . . . . . . . . . . . . . . . . . . . . . . . 5
List of Tables
1 DC Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 AC ANALYSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 NOISE ANALYSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1
Analog IC Design Laboratory MT17MVD007
1 Problem statement
Design a Common Source Amplifier for Gain Greater than 20 dB and Bandwidth
greater than 1 MHZ
Do DC Analysis to show your DC Operating Point using transfer characteristics.
o AC analysis to shown gain and bandwidth(frequency) of your amplifier.
Also Find the input and output noise.
2 Circuit Parameters
2
Analog IC Design Laboratory MT17MVD007
3 Simulation Results
To Fix the DC Operating Point
V dd
V out =
2
Find Vg for Vout in DC Transfer Curve and Also Find Id for that Particular Vg in
Id-Vd Curve
We can Find Rd from the Output Equation
V out = V dd − Id ∗ Rd
GainAv = −gm ∗ Rd
Table 1: DC Analysis
Ac Voltage(mV) Gain(dB) Bandwidth(GHZ)
1 20.3 1
Table 2: AC ANALYSIS
24.7 67
3
Analog IC Design Laboratory MT17MVD007
4 Conclusion
1. DC Operating point is decided by Vd vs Vg curve where Vd is half of its maxi-
mum value.
2. At that operating point by changing rd value achieved the required gain by track-
ing operating point also.
4
Analog IC Design Laboratory MT17MVD007
1.5
Current (dB)
0.5
DC TRANSFER CURVE
0
0 0.5 1 1.5 2
Voltage ss(Vgs) (Hz)
20
15
Mag(V(2)/V(1) (dB)
10
-5 GAIN CURVE
1 100 10000 1x106 1x108 1x1010 1x1012
Frequency(Hz)