Scribd
Upload
179 views

Leseprobe ABC Der Power Module en Basics

The document discusses DC/DC voltage converters, which convert an input DC voltage into a regulated or unregulated output voltage. It describes how DC/DC converters are used when downstream circuits require different voltage levels than the source. It then summarizes different types of non-isolated and isolated DC/DC converters and discusses their advantages and disadvantages. The document also provides an overview of linear voltage regulators, how they work to provide constant voltage, and why they are commonly used despite their lower efficiency compared to switching regulators.

Uploaded by

HOD EEE
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
179 views

Leseprobe ABC Der Power Module en Basics

The document discusses DC/DC voltage converters, which convert an input DC voltage into a regulated or unregulated output voltage. It describes how DC/DC converters are used when downstream circuits require different voltage levels than the source. It then summarizes different types of non-isolated and isolated DC/DC converters and discusses their advantages and disadvantages. The document also provides an overview of linear voltage regulators, how they work to provide constant voltage, and why they are commonly used despite their lower efficiency compared to switching regulators.

Uploaded by

HOD EEE
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

1 Basics

1.1 DC/DC voltage converters

1 Basics

1.1 DC/DC voltage converters


A DC/DC converter (DC stands for Direct Current) converts an input DC voltage into a
regulated or non-regulated DC output voltage which can be higher or lower, inverted or
non-inverted and isolated or non-isolated.

DC/DC converters are added in the circuit where downstream electronic circuits/­
components require voltage levels that differ from the available voltage at the source.

For example, a 24 VDC truck battery cannot drive a radio or UHF transmitter in a car,
as the voltage of 12 VDC is required in this case.

Today, DC/DC converters are part of almost all electronic products, such as phones,
laptops, tablet computers, notebooks, routers, printers, TVs, lighting control devices
etc.

For the developer, the specification and selection of a DC/DC converter is crucial prior
to its use in order to ensure the correct operation of the product and to be sure that
the final product does not constitute a hazard for the user.

Different applications call for different DC/DC converter requirements and therefore
various converter topologies and controllers are necessary to cater the needs.

The basic function of a switching regulator can be described as “taking energy from
the input source and passing it to the load, while maintaining the output voltage level
appropriate for the load”. The input capacitor is charged up to the input voltage. An
inductance is used as an energy storage element energy and to limit the current flow.
The cycles are generated by an electronic switch which is periodically controlled with a
square-wave signal. The ratio of the On and Off phases of the switch also determines Square-wave signal
the ratio of the input to the output voltage. The output voltage is present at the output
capacitor and supplies the load. Depending on whether the inductance was imple-
mented in the circuit (topology), the output voltage may be higher or lower than the
input voltage.

Another simplified explanation of the function of a buck regulator is also applicable. An


AC voltage is generated from the DC voltage at the input of a regulator by cycling. A
filter (inductance + capacitance) then converts this back to a DC voltage with another
amplitude.

The switching converters are broadly categorized as isolated and non-isolated convert-
ers. They are sub-categorized as follows:

13
1 Basics
1.1 DC/DC voltage converters

Non-isolated DC/DC voltage converters:


• Buck (step-down) converters
• Boost (step-up) converters
• Buck/boost (step-up/step-down) converters
• Inverting converters
• SEPIC converters
• Switched-capacitor voltage converters

Isolated DC/DC voltage converters:


• Flyback converters
• Forward converters
• Push-pull converters
• Resonant converters
• Half-bridge converters
• Full-bridge converters

The non-isolated converters represent an inexpensive solution for many applications


and are often used for small voltage conversions. However, they cannot offer much
protection against high input voltages or transients. In contrast, the isolated DC/DC
voltage converters have a high isolation voltage and can therefore be used for isolating
floating ground connections between input and output. The isolated converters are
more complex circuits and require a higher number of components and hence costly
solutions.

In the case of a discrete switching regulator solution, the number of discrete compo-
nents is higher and each discrete component needs to be selected wisely to meet the
power requirement. The size of individual components has a direct implication on the
overall converter size. In addition, the issues of EMC, heat management, as well as
efficiency and temperature response of the circuit, have to be taken into consideration
at the outset of design and this development depends more than ever on the user’s
expertise and time resources.

A power module represents an alternative to a discrete DC/DC voltage converter. All


discrete components including controller IC, transistors, diodes, inductors and small
capacitors are integrated in a package. The EMC, thermal and electrical performance
are taken care of. In some cases, input and output capacitors are even integrated or
capacitor selection recommendations are described in application notes.

Another advantage of the power modules is that it is in line with the ongoing trend of
component miniaturization, because a power module needs a far smaller area on the
circuit board than a discrete solution. Compliance with the respective norms and per-
formance data are confirmed by the power module manufacturer in the datasheet and
complex, cost-intensive tests and certifications for the assemblies can be significantly
reduced.

14
1 Basics
1.2 Linear regulators

One of the simplest components for DC voltage regulation is the linear voltage regula-
tor, also known as series regulator. Series regulators are inexpensive, simple to use Series regulator
and to design-in, yet they have some significant drawbacks when compared with a
power module, e.g. poorer efficiency and a higher power loss.

1.2 Linear regulators


Linear voltage regulators are used very often in electronic circuits to convert unregu-
lated, fluctuating voltage to a constant voltage. The linear regulators (Fig.1.1) are well Linear regulators
suited for applications in which the available voltage is usually only slightly higher than
the required voltage because minimizing the voltage difference between the input and
output leads to a lower power loss. It can quickly compensate a load transient and also
does not generate any interference radiation (EMI).

On account of their low space requirement (packages e.g. 78Lxx, 78Sxx and 78Hxx),
linear regulators are preferred over switching regulators. 78xx series voltage regulators
for positive and 79xx series for negative output voltages are probably the best known
DC/DC converters. The xx in the type designation denotes the respective output volt-
age. A small number of passive components and therefore reasonable technical effort
to design-in linear regulators makes them a very cost-effective variant for voltage
regulation.

Fig. 1.1: Typical series regulator package TO220

Linear regulators are realized as integrated circuits that contain the control section
(transistor) and a reference voltage. Linear voltage regulators come in two categories:
fixed and with an adjustable output.

15

You might also like