Scribd
Upload
222 views

Marshall

The document describes a Marshall Stability Test Machine used to test asphalt mixtures. The UTAS-0052 model has a 50 kN capacity and tests cylindrical samples that are 4 inches in diameter at a rate of 50.8 mm per minute. It includes a load ring, digital dial gauge, and breaking head. The machine determines the maximum load and flow values of asphalt mixtures according to relevant standards. It is supplied with components like a load ring, digital gauge, and breaking head to perform stability tests on asphalt samples.

Uploaded by

Banta SINGH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
222 views

Marshall

The document describes a Marshall Stability Test Machine used to test asphalt mixtures. The UTAS-0052 model has a 50 kN capacity and tests cylindrical samples that are 4 inches in diameter at a rate of 50.8 mm per minute. It includes a load ring, digital dial gauge, and breaking head. The machine determines the maximum load and flow values of asphalt mixtures according to relevant standards. It is supplied with components like a load ring, digital gauge, and breaking head to perform stability tests on asphalt samples.

Uploaded by

Banta SINGH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ASPHALT

MATERIAL TESTING EQUIPMENT


Design and Testing of Bituminious Mixtures
MARSHALL STABILITY

Product Code

UTAS-0052 Marshall Stability Test Machine


with Proving Ring, 50 kN, 220-240 V 50-60 Hz
UTAS-0052/110 Marshall Stability Test Machine
with Proving Ring, 50 kN, 110 V 60 Hz
UTAS-0057 Breaking Head (Stability Mould) 4”
UTAS-0058 Breaking Head (Stability Mould) 6”
UTAS-0059 Digital Dial Gauge with Bracket, 25x0.01 mm
for UTAS-0057 and UTAS-0058,
UTAS-0063 Indirect Tensile Splitting Device for Compacted
Bituminous Samples 100 mm (4”) dia.

Standards
EN 12697-34, 12697-23, 12697-12 (Method A);
ASTM D1559, D5581, D 6927; AASHTO T245

The UTAS-0052 50 kN capacity Marshall Stability Test Machine


with proving ring is used to determine the maximum load and flow
values of bituminous mixtures.

The UTAS-0052 comprises a robust and compact two column


frame with adjustable upper cross beam. The unit is a bench
mounted compression frame with motor and worm gear housed
within the base unit. The mechanical jack raises the lower platen
at a constant speed of 50.8 mm/min as required in the relevant
standard. For safety, the up and down travel of the lower platen
movement is limited by limit switches. Rapid adjustment of the
platen is also provided using the control buttons on the front panel
of the machine.

The measuring system consists of a 50 kN capacity load ring,


UTAS-0052
digital flow meter (dial gauge) fitted to the breaking head.
The UTAS-0052 Marshall Stability Machine is also suitable for
testing 6” dia. specimens (152.4 mm) conforming to ASTM D5581.

The machine can be hand operated by a lateral hand wheel for


calibration purposes; the hand wheel is supplied complete with
the machine.

The UTAS-0052 Marshall Stability Test Machine is supplied


complete with

• Load Ring, 50 kN
• Digital Dial Gauge with Bracket, 25x0.01 mm
• Hand Wheel for Manual Control
• Breaking Head, 4”

Dimensions 550x700x1200 mm
Weight (approx.) 103 kg
Power 1100 W

ASO 1. Organize Sanayi Bolgesi Ural Caddesi No: 18 Sincan / ANKARA / TURKEY
P. 90.312 394 3875 (pbx) F. 90.312 394 3877 [email protected]
www.utest.com.tr 01

You might also like