USMT GUI 10.18.

1803 User guide

USMTGUI - User guide for backup and restore of local and Domain user profiles

Easy transfer of User Profiles from one PC to another.

Save data to USB hard disk or network and restore to the new PC

In this guide, you will see how simple it is to migrate user profiles (quick overview page 3 and 4):

1. From one computer to another (Use USMTGUI offline to back up from XP/Vista. Page 10)
2. From one Windows version to another
3. From one Domain to another (or local to Domain)
4. And even from one username to another (local or Domain).

5. With the Pro version it is even possible to migrate users of an old installation or from a disk
where Windows will no longer boot (of cause there’s limitations if files are corrupted).
You can even use the supplied ISO to boot into USMT GUI Offline and rescue your profile 

USMTGUI will NOT however be able to back up a broken profile. This hence normally when the
profile is broken, the Ntuser.dat file is just that – broken. Then Profile backup is not possible!

What does USMT backup then?

To see specifically what USMT does back up please see Microsofts USMT reference for USMT:

1
 USMT GUI 10.18.1803 User guide

Table of Contents
USMTGUI - User guide for backup and restore of local and Domain user profiles .............................................. 1
What does USMT backup then? ....................................................................................................................... 1
1. Create a User profile backup ............................................................................................................................ 3
Backup Errors................................................................................................................................................ 3
2. Restore a User profile ....................................................................................................................................... 4
To get back Sticky Notes and Edge favorites see chapter 4. USMTafterburner ........................................... 4
Restore Errors ............................................................................................................................................... 4
3. Restore a user profile to other user/other Domain ......................................................................................... 5
To get back Sticky Notes and Edge favorites see chapter 4. USMTafterburner ........................................... 5
Restore Errors ............................................................................................................................................... 5
4. USMTafterburner ............................................................................................................................................. 6
To get back Sticky Notes and Edge browser favorites:................................................................................. 6
5. Save data to, and restore from, network share ............................................................................................... 7
6. Log file locations ............................................................................................................................................... 8
7. Silent install ...................................................................................................................................................... 8
Silent install .................................................................................................................................................. 8
USMTGUI Offline User guide (Optional, Only with Pro version!!)........................................................................ 9
Uses of USMTGUI Offline.................................................................................................................................. 9
User Profile backup from Windows.Old “Upgrade- Install” folder............................................................. 9
User Profile Backup off hard disk from old or Dead Pc ................................................................................ 9
User Profile Backup off hard disk with Boot ISO .......................................................................................... 9
Errors ............................................................................................................................................................ 9
USMTGUI Offline Usage Guide ....................................................................................................................... 10
USMTGUI St. Alone Corporate Automatization functionality ........................................................................ 11

2
 USMT GUI 10.18.1803 User guide

1. Create a User profile backup

After installing USMT GUI:

1. Preferably Logon as the local Administrator and start the interface.

2. Select where to store data (When storing to a network location please see chapter 4..)
3. Select which users you want to backup
4. Click “RUN” and wait for the Process to finish

Password: You CAN set a password without blanks. But don’t forget it. There is no recovery method !!

Backup Errors
In the event you get any errors, that you do not completely understand, please send the log files and we
will figure out where the problem lies.

To locate the USMT log files please locate your storage location (see chapter 5 for details)

3
 USMT GUI 10.18.1803 User guide

2. Restore a User profile

1. Preferably Logon as the local Administrator and start the interface.
2. Point to where you stored data (When restoring from a network location please see chapter 4..)
3. Select which users you want to Restore
4. Click “RUN” and wait for the Process to finish

To get back Sticky Notes and Edge favorites see chapter 4. USMTafterburner

Restore Errors
In the event you get any errors, that you do not completely understand, please send the log files and we will
figure out where the problem lies.
To locate the USMT log files please locate your storage location (see chapter 5 for details)

NOTES:
• IF restoring to a Local account that already exists on the Pc, please deselect the switches “Create User
Account(s)” and Enable User Account(s)”
• IF restoring to a Domain account, please make sure the account IS present on the Domain but has not
logged in locally on the PC you restore to. In case the user already did login on that PC, please delete the
users profile locally prior to restoring, through “Advanced System Settings”.

4
 USMT GUI 10.18.1803 User guide

3. Restore a user profile to other user/other Domain

When restoring a user to a new user name, or users to another domain, use the following selections

The “Move to new Domain” is supported in USMTGUI Corp versions, and only visible on Domain joined PC’s.

Also, the “New Username” is only available when only one user is selected in the “Selected Users” box.

To get back Sticky Notes and Edge favorites see chapter 4. USMTafterburner

Restore Errors
In the event you get any errors, that you do not completely understand, please send the log files and we will
figure out where the problem lies.
To locate the USMT log files please locate your storage location (see chapter 5 for details)

NOTES:
• IF restoring to a Local account that already exists on the Pc, please deselect the switches “Create User
Account(s)” and Enable User Account(s)”
• IF restoring to a Domain account, please make sure the account IS present on the Domain but has not
logged in locally on the PC you restore to. In case the user already did login on that PC, please delete the
users profile locally prior to restoring, through “Advanced System Settings”.

5
 USMT GUI 10.18.1803 User guide

4. USMTafterburner

During the backup, selected Modern App settings/data are backed up to an alternative temporary location.
The USMTAfterburner is added to the backup and thereby automatically restored on the new users/profiles
desktop when the users data is restored.

Only with Win10.xml or Win7and8toWin10StickyNotes.xml selected during backup and restore!!!

To get back Sticky Notes and Edge browser favorites:

When logging on with the new user/profile, open and then close the Edge browser and
Sticky Notes once. Then run USMT Afterburner to restore Sticky Notes and Edge favorites.

Note: To restore Legacy (old 7/8 and early Win10) Sticky Notes, do not open Sticky Notes prior to restoring.
- Don’t worry, USMT Afterburner will guide you 

6
 USMT GUI 10.18.1803 User guide

5. Save data to, and restore from, network share

To get the logic in why this is an issue you must first understand a little more about what really goes on when
you run USMT GUI.

USMT is a command line tool from Microsoft. USMT GUI just simplifies the use, since USMT is a highly
technical tool to run by hand.

So what USMTGUI actually does, is setup a command line for USMT, run it, and monitor that everything goes
well. To be able to access all the selected users data, USMT must run in an Elevated Command Prompt and
the GUI does that for you..

So far so good... ???

Well here comes the culprit regarding storing on a network share.

When/if you, as another user than Local Administrator select a network share to save to, you do it with the
rights belonging to that user. However, USMT runs in the Elevated Command Prompt and that does NOT
have access to the users mounted drive letters.

Solution:

1. Store locally and move the data after

2. Logon as the Local Administrator and map the drive with credentials before running USMT GUI.
3. Open a command prompt with “Run as Administrator” and map the Network location by hand
before running USMT GUI.
4. Use an UPC path (you know: \\serverFQDN\share )

7
 USMT GUI 10.18.1803 User guide

6. Log file locations

To locate the USMT log files please just open File Explorer and browse to the location where you chose to
store your backup or where the backup you tried to restore is residing.

Copy all log files starting with “USMT” and send them to us at [email protected]

7. Silent install

Silent install
"USMTGUI 10.exe" /quiet
"USMTGUI 10 Pro.exe" /quiet
"USMTGUI 10 Pro Corp.exe" /quiet

8
 USMT GUI 10.18.1803 User guide

USMTGUI Offline User guide (Optional, Only with Pro version!!)

Uses of USMTGUI Offline

User Profile backup from Windows.Old “Upgrade- Install” folder

If you have made an “Upgrade-Install”, an old installation folder is present. C:\Windows.Old..
In that folder there is a complete copy of your old installation and if you want one or more user
profiles from there, you can use USMTGUI Offline, installed with the Pro version side by side to
USMTGUI.

------------------

NOTE: Since MS Scanstate does not run natively on XP and Vista, you must use either of the two
methods below to backup user profiles from XP and Vista! Annoying but it saves your day. 

------------------

User Profile Backup off hard disk from old or Dead Pc

By connecting a functioning disk, from an old or dead Pc, to a Pc with USMT Offline installed, you
can backup user profiles and then restore to a new Pc with USMTGUI.

User Profile Backup off hard disk with Boot ISO

If you have a Pc where Windows for some reason will no longer boot, but the hardware seems okay,
you can even use the downloadable ISO to boot into USMT GUI Offline and rescue your user profiles

Errors
Of course, there are limitations if fx files are corrupted. Typically, a corrupt user profile will not be
successfully backed up!)

Note: USMTGUI Offline CANNOT migrate user profiles of a running Windows.

Use USMTGUI for that!

9
 USMT GUI 10.18.1803 User guide

USMTGUI Offline Usage Guide

Once you have the USMTGUI Offline interface loaded one way or the other, you simply

1. Select the Windows folder in question

2. Select operating system version.
3. Select where to store the data
4. Optionally, if you want only to backup certain profiles, click “Selected Users” and let USMTGUI
Offline detect the user profiles available (typically this takes a few minutes) and select.
5. Press “RUN Backup”

Note: Use USMTGUI to restore the users. NOT USMTGUI Offline.

10
 USMT GUI 10.18.1803 User guide

USMTGUI St. Alone Corporate Automatization functionality

The USMTGUI St. Alone Ent.zip file contains a custom version of USMTGUI that can be controlled by a config
file. If the config file USMTGUIAutoSetup.txt is present, the four top lines will be read, and acted upon.

Thereby anyone can use USMTGUI to make a Profile backup and it is a very swift tool in the everyday work
scene for technicians handling many Pc’s.

Below is the USMTGUIAutoSetup.txt file with self explanatory comments:

-------------------------------------------------------------------------------
"\\serverFQDN\share\folder\" < Storagepath
120 < Days since last login
< Encryption password
False < Start automatically without user intervention

-------------------------------------------------------------------------------
# Top Four !! lines of this file will be read.
-------------------------------------------------------------------------------

# Line 1 is the preconfigured storage path.

¤ You can use a hard coded path (eeg "c:\temp\usmttest\") or a Network UNC path eeg
"\\server\share\folder\")
¤ or use a combination of "%~d0" / "%~dp0" / %Systemdrive% and path.
¤ %~d0 will substitute with the drive from where USMTGUI is run.
¤ %~dp0 will substitute with the drive AND path from where USMTGUI is run.
¤ %Systemdrive%\ will substitute with the drive where windows is installed

¤ Example where USMTGUI runs from h:\Ehlertech\

¤ "%~d0\USMTtest\" will store in the folder h:\USMTtest\%Computername%
¤ "%~dp0\USMTtest\" will store in the folder h:\Ehlertech\USMTtest\%Computername%

¤ Do NOT add Computername or %Computername% as the GUI does it for you.

¤ - IF the storage path does not exist the Auto function exits.
¤ - IF the storage path including %Computername%\mig\ folder does exist,
¤ the GUI sets up for restore

-------------------------------------------------------------------------------
# Line 2 is the 'Number of days since last login'
¤ - If set to blank all users will be included
¤ - If set to "0" only currently logged in user(s) will be backed up.
¤ - If set to 1-999 all users logged in within the timeframe will be backed up

-------------------------------------------------------------------------------
# Line 3 is Encryption password
Set to blank or set to any passcode without blanks

-------------------------------------------------------------------------------
# Line 4 is autorun True/False and MUST be set to either True or False.

11