DC1010 - DC1020 - DC1030 - DC1040

General Purpose DIGITAL CONTROLLERS

PRODUCT SPECIFICATION SHEET

OVERVIEW
The DC1000 family of
microprocessor based controllers
combine a high degree of
functionality and reliability at a
very low price. Available in 4
different formats : 1/16 DIN, 1/8
DIN, 3/16 DIN, 1/4 DIN. These
controllers are ideal for regulating
temperature in a variety of
applications, including :
• Dryers.
• Semiconductor packaging / DC1010 (1/16 DIN) DC1020 (1/8 DIN)
testing.
• Plastic processing.
• Packaging machinery.
• Painting and coating.
• Climatic chambers.
The DC1000 family provides
basic control requirements, plus
advanced features such as motor
position control, phase angle
power control and Setpoint
programming.

FEATURES DC1030 (3/16 DIN) DC1040 (1/4 DIN)

Easy to configure Dual display and Bargraph Communications
Two different configuration levels Two large 4 digits displays and one 10 RS232 or RS485 Modbus rtu/ASCII
provide easy access to parameters. LED bargraph display PV, SP and protocol is optionally available.
A 4-digit security code prevents configuration parameters. Up to 8 LEDs Upto 30 DC1000 Controllers can be
unauthorized changes. Parameters display the status of the different Outputs connected to a single host
can also be hidden to the user to (Control, Alarm, …) and also provides computer. The host computer
prevent mis-configuration of the unit. indication of the Auto/Manual and can change the SP, monitor the
Programmer states. PV, the output or change the
Various Control algorithms configuration of the unit.
The DC1000 series of controllers Setpoint Programming
Two programs are available, with a Remote Setpoint capability.
provide several different algorithms:
• PID or ON/OFF control. maximum of 8 segments per program. Manual / Automatic modes.
• Heat/Cool algorithms with 2 The 2 programs can be linked together to
form a single 16 segment program. Universal Power supply
different PID sets. Operates on any voltage from
• Motor position control without 85Vac to 264Vac at 50/60Hz.
Extended Alarm capability
slidewire feedback. 24Vdc operating voltage is optional.
Three different alarm outputs are
• Single phase control, with or
available per instrument, 17 alarm modes Operating range
without zero crossover control. These instruments operate,
are configurable.
• Three phase control, with or from 0°C to +50°C (32°F~122°F)
without zero crossover control. Autotuning capability. Humidity=50 to 85% RH
SPECIFICATIONS

Technical data

Thermocouples : K, J, R, S, B, E, N, T, W, PL II, U, L
Type of Input RTD : Pt100, JPt100, JPt50
PV Input Linear : 4~20mA
Input Sampling Time 250 ms
Input Resolution 14 bit (each)
PV/SP Indication 4-digit, 7 segment display
Indication Constant Value Storage System Non-volatile memory (EEPROM)
Indication Accuracy +/-0.2%FS
Proportional Band ( P ) 0~200% (On/Off action at P=0)
Integral Time ( I ) 0~3600 sec (PD action at I=0)
Control Mode Derivative Time ( D ) 0~900 sec (PI action at D=0)
Cycle Time 0~150 sec (4~20mA=0, SSR=1, Relay=10)
Dead Band Time 0~1000 sec (dead time compensation)
Relay Output Electromechanical relay
• SPDT contacts (DC101 :SPST)
• 3A/240Vac
Static relay driver output Voltage Pulse, 20VDC/20mA
Output Current & Voltage outputs 0~20mA, 4~20mA,
0~5V, 0~10V, 1~5V, 2~10V
Motor Control Output Servo motor valve control (open loop circuit)
Others Phase angle control :
1ϕ SSR, 3ϕ SSR, 1ϕ SCR, 3ϕ SCR
Number Up to 3 (optional, DC101 :2sets)
Modes 17 alarm modes available, hability to ignore the alarm
the first time it occurs :
Deviation high or low alarms.
Deviation alarms.

Alarm Band alarm.

High or low alarm.
End of segment alarm.
Program run indication alarm.
Timer alarm.
Timer One timer is associated with each alarm.

Retransmission Output Signal SP, PV

output Type of Output 4~20mA, 0~20mA, 0~5V, 0~10V, 1~5V, 2~10V

51-52-03-33 08/03 2
 2nd Input Type of Input 4~20mA, 0~20mA, 0~5V, 0~10V, 1~5V, 2~10V
(Remote SP) Sampling Time 500 ms.
Programs Number 2 programs of 8 segments each.
Type of Communication RS-232 or RS-485. Modus rtu(HEX), Modbus ASCII
Communication
Specification Partity= Odd/Even, Data bit= 8bits,
Stop bit=1 or 2 bit
Communication Speed 2400,4800,9600,19200,38400 bps
Rated Power Supply Voltage & AC 85 ~ 265V, 50/60Hz
Frequency DC24V(optional)
Operating Power Consumption 8VA (110V), 12VA (220V)
conditions
Ambient Temperature -20°C ~ 65°C (-4°F ~ 149°F)
Ambient Humidity 50 ~ 85% RH (non condensing)
UL (QUXY2-E201698)
Approvals
CE Mark.

TC & RTD Types & ranges

°C °F

0.0~200.0 °C 0.0~400.0 °C 0.0~600.0 °C 0.0~392.0 °F 0.0~752.0 °F 0~1112 °F

K
0~800.0 °C 0~1000 °C 0~1200 °C 0~1472 °F 0~1832 °F 0~2192 °F
0.0~200.0 °C 0.0~400.0 °C 0.0~600.0 °C 0.0~392.0 °F 0.0~752.0 °F 0~1112 °F
J
0~800 °C 0~1000 °C 0~1200 °C 0~1472 °F 0~1832 °F 0~2192 °F

R 0~1600 °C 0~1769 °C 0~2912 °F 0~3216.0 °F

S 0~1600 °C 0.0~1769 °C 0~2912 °F 0~3216.0 °F

B 0~1820 °C 0~3308 °F

TC E 0~800 °C 0~1000 °C 0~1472 °F 0~1832 °F

N 0~1200 °C 0~1300 °C 0~2192 °F 0~2372 °F

T -199.9~400.0 °C -199.9~200.0 °C 0.0~350.0 °C -199.9~752.0 °F -199.9~392.0 °F 0.0~662.0 °F

W 0~2000 °C 0~2320 °C 0~3632 °F 0~4208 °F

PL II 0~1300 °C 0~1390 °C 0~2372 °F 0~2372 °F

U -199.9~600.0 °C -199.9~200.0 °C 0.0~400.0 °C -199.9~999.9 °F -199.9~392.0 °F 0.0~752.0 °F

L 0~400 °C 0~800 °C 0~752 °F 0~1472 °F

Pt -199.9~600.0 °C -199.9~400.0 °C -199.9~200.0 °C -199.9~999.9 °F -199.9~752.0 °F -199.9~392.0 °F

100 0~200 °C 0~400 °C 0~600 °C 0~392 °F 0~752 °F 0~1112 °F

JPt -199.9~600.0 °C -199.9~400.0 °C -199.9~200.0 °C -199.9~999.9 °F -199.9~752.0 °F -199.9~392.0 °F

RTD
100 0~200 °C 0~400 °C 0~600 °C 0~392 °F 0~752 °F 0~1112 °F

JPt -199.9~600.0 °C -199.9~400.0 °C -199.9~200.0 °C -199.9~999.9 °F -199.9~752.0 °F -199.9~392.0 °F

50 0~200 °C 0~400 °C 0~600 °C 0~392 °F 0~752 °F 0~1112 °F

51-52-03-33 08/03 3
Control Algorithms

• PID or ON/OFF control.

• Heat/Cool algorithms with 2 different PID sets.
• Phase angle control
Single Phase Three Phase
L N R S T
Controller Controller
Thyristor
G1 G1 Module

K1 K1
K2 G2
OFF
G2
K2 ON
G3
K3
Thyristor P
Module R
PROT

O
T L
L
3φ LOAD
1φ LOAD

In phase angle control, power is regulated by changing the point at which the SCR is turned on within each 1/2 period.
Single Phase : Output is changed every half-cycle in response to output signals from the Temperature Controller.
Three Phase : The outputs are changed every 120° in response to signals from the Temperature Controller.
Using this form of control, high-precision temperature control is possible.

• Zero-crossover control
Single Phase Three Phase
L N R S T
Controller Controller
Thyristor
G1 Module
RG1
RG2

G2
TG1
TG2

Thyristor
P P
Module
R R
O O
T L T L

1φ LOAD 3φ LOAD

The term Zero-Crossover means that the SCR's are turned on only when
the instantaneous value of the sinusoidal wave is zero. Power is then
applied for a several continuous half-cycles and then removed for
several half-cycles to achieve the desired load power.
ON OFF

• Motor position control without slidewire Feedback.

MOTOR VALVE
Motor position is achieved by using time proportional control
COM
R CONTROLLER without the need for slidewire feedback from the motor shaft.
CLOSE OUT2
Relay
CLOSE

OPEN
Slidewires wear over a period of time, which can result in
OPEN
COM OUT1 poor or intermittent control. This type of control reduces
Relay

maintenance requirements and removes the need for the

S
controller to be calibrated to the motor feed back
potentiometer.

51-52-03-33 08/03 4
EXTERNAL DIMENSIONS, PANEL CUTOUT

DC1010
68 mm - 2.68 in

50 mm - 1.97 in 6 mm 13.5 mm

45.5 mm - 1.79 in
0.24 in 74.5 mm - 2.97 in 0.53 in

50 mm - 1.97 in
60 mm - 2.36 in
44 mm - 1.73 in

45.5 mm - 1.79 in

DC1020
6 mm 13.5 mm
48 mm - 1.89 in 0.24 in 74.5 mm - 2.97 in 0.53 in
60 mm - 2.36 in

96 mm - 3.78 in 91mm
3.58 in
86 mm
116 mm
3.39 in
4.57 in
45.5mm
1.79 in

DC1030
6 mm 13.5 mm
72 mm - 2.83 in 74.5 mm - 2.97 in 91 mm - 3.58 in
0.24 in 0.53 in

69.55 mm
91 mm - 3.58 in
66 mm - 2.60 in

72 mm - 2.83 in

2.74 in

69.55 mm
2.74 in

51-52-03-33 08/03 5
EXTERNAL DIMENSIONS, PANEL CUTOUT

DC1040
96 mm - 3.78 in 6 mm 13.5 mm
74.5 mm - 2.97 in 116 mm - 4.57 in
0.24 in 0.53 in

90 mm

116 mm - 4.57 in
96 mm - 3.78 in
3.54 in

90 mm
3.54 in

HUMAN / MAN INTERFACE

Higher display : 4 digits dedicated to display the PV. In configuration mode, this
display indicates the value of the parameter or the patameter selected.

Lower display : 4 digits dedicated to display the SP ; In configuration mode,

indicates the name of the parameter.

Bargraph : A 10 green LEDs bargraph indicates the value of the output in

percentage.

LEDs :
OUT1 : Status of output 1.
OUT2 : Status of output 2.
AT : When the LED is ON an automatic tuning of the parameters is on going.
AL1 : Status of alarm 1.
AL2 : Status of alarm 2.
AL3 : Status of alarm 3.
MAN : ON if we are in Auto mode. OFF if manuel mode.
PRO : Flickers when a program is running.
Continuously ON when a program is suspended.
OFF when no program is running.

SET allows to change from one parameter to another. Pressing it for 5 seconds grants access to the
configuration level 1 (PID parameters+locking the instrument).
Pressing simultaneously for 5 seconds on the left arrow and SET grants access to the configuration
level 2 (input type, alarmes, SP limits, field calibration, communication parameters, …).
A/M allows to switch from Auto to When modifying a parameter, pressing this key
Manual. allows to change the digit to modify.

Pressing this key decreases the Pressing this key increases the parameter or
parameter or digit being modified. digit being modified.

51-52-03-33 08/03 6
MODEL SELECTION GUIDE
• Select the desired Key Number.
• Make One selection each from Tables I through III.

Key Number DC10 0 - - -

Dimension
1 48*48mm
2 48*96mm
3 72*72mm
4 96*96mm
Table III
Program Input
Manual
C None R RTD
E English
P Program T TC
F French
L Linear
I Italian
G German
S Spanish

Table I Table II
Output 1 Output 2 Alarm Aux. Output 2nd Input Comm.
0 None 0 None 0 None 0 None 0 None 0 None
1 Relay 1 Relay 1 1 alarm 1 4~20mA 1 4~20mA 1 RS232
2 Voltage 2 Voltage 2 2 alarms 2 0~20mA 2 0~20mA 2 RS485
3 4~20mA 3 4~20mA 3 3 alarms A 0~5V A 0~5V
5 1 ϕ SSR A 0~5V B 0~10V B 0~10V
6 3 ϕ SSR B 0~10V C 1~5V C 1~5V
7 Motor V C 1~5V D 2~10V D 2~10V
8 1 ϕ SCR D 2~10V
9 3 ϕ SCR
A 0~5V
B 0~10V
C 1~5V
D 2~10V

Distributor :

Industrial Measurement and Control

Honeywell Inc.
Japan : Industrial Operations Tokyo, 4-28-1 Nishi-Rokugo Othu-ku, Tokyo 144, Japan,
Asia : Honeywell Asia Pacific Inc., Room 3213-3225, Sun Hung Kai Centre, No. 30 Harbour Road, Wanchai, Hong Kong
Pacific Division : Honeywell Pty Ltd., 5 Thomas Holt Drive, North Ryde NSW Australia 2113
Northern Europe and Southern Africa : Honeywell Ltd., Honeywell House, Arlington Business Park, Bracknell, RG 12 1 EB, U.K.
Central Europe : Honeywell A.G., Kaiserleistraße 39, 63067 Offenbach, Germany
Western and Southern Europe : Honeywell S.A., Bourgetlann 1, 1140 Brussels, Belgium
Eastern Europe : Honeywell Praha, s.r.o., Budejovicka1, 140 00 Prague 4, Czech Republic
Middle East : Honeywell Middle East Ltd., Khalifa Street, Sheikh Faisal Building, Abu Dhabi, U.A.E

51-52-03-33 08/03 7