Scribd
Upload
64 views

#Notes2-Sketchup Interface and Basic Shape

The document provides an overview of tools and techniques for using SketchUp, including: 1) The tape measurement tool allows obtaining dimensions by dragging the tool on model faces. 2) Guidelines are recommended for precision arches, but the arc tool can also draw freehand. 3) The freehand tool creates irregular lines by dragging the cursor. 4) The offset tool duplicates a face or edge at a specified distance, and the scaling tools allow uniform resizing of objects.

Uploaded by

Syahida Arif
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
64 views

#Notes2-Sketchup Interface and Basic Shape

The document provides an overview of tools and techniques for using SketchUp, including: 1) The tape measurement tool allows obtaining dimensions by dragging the tool on model faces. 2) Guidelines are recommended for precision arches, but the arc tool can also draw freehand. 3) The freehand tool creates irregular lines by dragging the cursor. 4) The offset tool duplicates a face or edge at a specified distance, and the scaling tools allow uniform resizing of objects.

Uploaded by

Syahida Arif
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

SKETCHUP NOTES

CHAPTER 2: SKETCH UP INTERFACE & BASIC SHAPE II (11/02/2015)


BY: NUR SYAHIDA MOHD ARIF
REFERENCE: TheSketchUpessentials.com

LEARNING OUTCOMES
a. TO USE PROTECTOR TOOLS TO OBTAIN THE DIMENSION OF THE MODEL
b. TO DRAW AN ARCH, TO USE FREEHAND TOOLS
c. TO UTILIZE THE MODIFICATION COMMAND SUCH AS, OFFSET,SCALLING, MIRROR, FOLLOW
ME TOOLS
TAPE MEASUREMENT TOOL

1) GO TO THE TOOLBAR MENU CHOOSE THE TAPE MEASUREMENT DRAG THE


MEASUREMENT TOOLS ON THE FACE OF YOUR POLYGON.

THIS WILL INDICATE THE


VALUE OF THE
DIMENSION. MAKE
SURE IT’S IN THE
CORRECT DIMENSION

Figure 1: Tape measuring tool

DRAWING AN ARCH

TO MAKE A PRECISION ARCH, IT’S BEST TO HAVE A GUIDELINE. IF YOU OPT TO GO FOR A FREE STYLE,
JUST SELECT THE ARC FROM THE TOOLBAR MENU, AND DRAW.

ARCH TOOLBAR

THIS LINE (1) & (2) ACT AS THE


GUIDELINE FOR THE ARCH
STRUCTURE, SO THAT IT IS
SYMMETRICAL

Figure 2: Tips drawing an arch

1
FREEHAND TOOLS

The freehand tool allows you to create irregular lines. To use this tool, click and hold down your
mouse button, then drag your cursor around the screen to draw. Quite honestly, I’ve never really
found much of a use for this tool, but it’s there if you need it.

Figure 3: Freehand tools

OFFSET TOOLS

1) DRAW A RECTANGLE CLICK THE PUSH/PULL BUTTON FROM THE TOOLBAR HOVER
YOUR MOUSE ON THE FACE OF THE POLYGON AND CLICK THE SURFACE ENTER THE VALUE OF THE
HEIGHT THAT YOU WANT HIT ENTER.

Figure 4: Tips drawing a rectangle Figure 5: Push/pull tools to make it a building block
THEN CHOOSE THE OFFSET TOOLS AS IN NO (3) FROM
THE TOOLBAR SELECTION.

CLICK ON THE SURFACE UNTIL IT’S HIGHLIGHTED AS PER


FIGURE (5), AND ENTER THE AMOUT OF OFFSET THAT YOU
WANT.

Figure 6: Offset tools

2
SCALING TOOLS

Figure 7: Step by step for uniform scale

Figure 8: Step by step for uniform scale

Figure 9: Step by step for uniform scale

3
Figure 10: Step by step for uniform scale

SCALING FOR MIRROR FUNCTION

Figure 11: Step by step to mirror an object

4
FOLLOW ME TOOL

1) DRAW A LINE AS ABOVE USING THE 2) DRAW A CIRCLE UNDERNEATH THE LINE, CLICK THE
LINE TOOLS AND ARCH TOOLS FOLLOW ME TOOLS AND DRAG THE CURSOR ALONG THE
PATH

DRAWING THE PROFILE USING FOLLOW ME TOOL

THIS IS THE PATH

THIS IS THE PROFILE

SELECT THE BOUNDING


EDGE

Figure 12: Step by step to build a structure profile

5
Figure 13: Step by step to build a structure profile

Figure 14: Step by step to build a sphere

You might also like