An Najah National University Telecommunication Engineering Department
An Najah National University Telecommunication Engineering Department
A modem converts the binary data from a computer to FSK for transmission
over telephone lines, cables, or wireless media.
advantage:
FSK is less susceptible to errors than ASK – receiver looks for specific frequency
changes over a number of intervals, so voltage (noise) spikes can be ignored
disadvantage:
FSK spectrum is 2 x ASK spectrum
application:
over voice lines, in high-freq. radio transmission, etc.
BFSK ( Binary Frequency Shift Keying )
M, the size of alphabet, is usually a power of 2 , so that, each symbol represent log2M bits.
The required Eb/N0 ratio (energy per bit to noise power spectral density ratio ) for a given
probability of error decreases as M increases.
Eb/N0
It’s useful when comparing the bit error rate (BER) performance of different digital
modulation schemes without taking bandwidth into account.
Eb/N0 is closely related to the carrier- to- noise ratio (CNR or C/N), i.e. the signal-to-noise-
ratio (SNR) of the received signal, after the receiver filter but before detection:
where
fb is the channel data rate
B is the channel bandwidth
Normally, the transmitted audio alternates between two tones: one, the "mark",
represents a binary one; the other, the "space", represents a binary zero.
AFSK is not always used for high-speed data communications, since it is far less
efficient both power and bandwidth than most other modulation modes.
•The simplest PSK technique is called binary phase-shift keying (BPSK). It uses two
opposite signal phases (0 and 180 degrees). The digital signal is broken up timewise
into individual bits (binary digits).
BPSK QPSK or( 4-PSK
`
The “PSK” in 8PSK refers to the use of Phased Shift Keying.
ASK
Simplicity
low implementation costs
conserving power.
How to Imagine noise ?
ф1 and ф 2 are vectors
Each diagram represents the additive noise with a dashed
line circle around the signal.
FSK vs PSK noise immunity?
you need to define a quantitative metric that has a level playing
field between the two, such as measuring the systems' bit-error
rate versus the signal to noise ratio ”
Error performance
Eb/N0 (the energy per bit to noise power spectral density ratio
THANK YOU
Questions