Scribd
Upload
6K views

Lifting Hook For Precast Segment

This document provides design details for lifting hooks on a precast concrete structure. It includes specifications for the concrete mix design, base slab and wall dimensions, reinforcement details, weight calculations, and checks for the shear and tension capacity of the lifting hooks. The lifting hook design satisfies code requirements for shear force, tension force, and anchorage length.

Uploaded by

eric bargas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6K views

Lifting Hook For Precast Segment

This document provides design details for lifting hooks on a precast concrete structure. It includes specifications for the concrete mix design, base slab and wall dimensions, reinforcement details, weight calculations, and checks for the shear and tension capacity of the lifting hooks. The lifting hook design satisfies code requirements for shear force, tension force, and anchorage length.

Uploaded by

eric bargas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Contract T207 Thomson-East Coast Line SHIMIZU Corporation

Client LTA Made by Date Page


Location JEB 6/14/2018 1
Checked Revision Job No.
CSK - -
Design of Lifting Hook Reference
Precast Properties
Concrete Design Strength, fcu = 40 N/mm²
Reinforced Concrete Density, ρrc = 25 kN/m³
Base Slab width, bs = 2.3 m
Base Slab Length, ls = 2.3 m
Base Slab Thickness, ts = 0.25 m
Wall Length, lw = 2.3 m
Wall Height, hw = 0.3 m
Wall Thickness, tw = 0.25 m
Slab Volume, vs = 1.32 m³ bslsts
Wall Volume, vw = 0.35 m³ 2lwhwtw

Extended Reinforcement
Reinforcement Density, ρs = 78.5 kN/m³
Extended Length, Le = 0.8 m
Reinforcement Spacing, s = 0.15 m
No. of Row, Nr = 4
Bar Diameter, d = 16 mm
Area, A = 201.06 mm² π/4d²
No. of Rebar per Row, N = 15 lw/s

Total Weight, wt = 42.45 kN ρc(vs+vw)+ρsALeNrN

Lifting Hook Properties


Yield Strength, fy = 460 N/mm²
Bar Diameter, db = 16 mm
Achorage, L = 600 mm
No. of Lifting Hook, n = 4
Load Factor, LF = 2
Inclination, ɸ = 45 degree

Design of Lifting Hook


wt of precast to be lift, Pp = 84.89 kN LFwt
Force per Lifting Hook, P = 30.01 kN Pc/nsinφ

Shear Capacity Check BS5950-1


Shear Force, F = 30.01 kN P
Shear Area, As = 180.96 mm² 0.9π/4db² 4.2.3
Shear Capacity, Fc = 49.94 kN 0.6Asfy >F OK 4.2.3

Tension Capacity Check


No. of Bar in Tension, nt = 2
Tension Force, T = 15.01 kN P/nt
Tensile Area, At = 201.06 mm² π/4db² 6.3.4.2
Tensile Capacity, Pnom = 73.99 kN 0.8Atfy >T OK 6.3.4.2

F/Fc + T/Pnom = 0.80 <1.4 OK 6.3.4.4

Anchorage Length Design CP65


Length Required, l = 94.41 mm T/fbπdb <L 3.12.8.3
fb = 3.16 N/mm² β√fcu 3.12.8.4
β= 0.5 Table 3.26

You might also like