Scribd
Upload
561 views2 pages

Logan Welded Cup Junk Subs

The document provides information on welded cup junk subs manufactured by Logan Oil Tools. Welded cup junk subs are downhole tools used to prevent cuttings from settling at the bottom of a hole during drilling or milling operations. They feature a welded steel body with support ribs that attach to and guide a cup. Standard cups are 10 inches deep but longer cups of 20 and 30 inches are available. The document provides specifications for junk subs in a range of sizes to fit different hole diameters and connection types.

Uploaded by

Sasan Abbasi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
561 views2 pages

Logan Welded Cup Junk Subs

The document provides information on welded cup junk subs manufactured by Logan Oil Tools. Welded cup junk subs are downhole tools used to prevent cuttings from settling at the bottom of a hole during drilling or milling operations. They feature a welded steel body with support ribs that attach to and guide a cup. Standard cups are 10 inches deep but longer cups of 20 and 30 inches are available. The document provides specifications for junk subs in a range of sizes to fit different hole diameters and connection types.

Uploaded by

Sasan Abbasi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

GENERAL CATALOG

WELDED CUP JUNK SUBS

Overview
The Logan Welded Cup Junk Sub is an acces-
sory tool that prevents cuttings from milling
or drilling operations that are too heavy to be
circulated from settling at the bottom of the hole.

Construction
The Logan Welded Cup Junk Sub is manufac-
tured from high strength, heat-treated alloy Body
steel to withstand wear.

Cup support ribs are welded to the main body


of the tool. These ribs attach to the cup and
guide the tool through tight places and prevent
it from being crushed.

The standard welded assembly has a 10-inch-


deep cup. Long (20-inch) and extra long (30-
inch) cup lengths are available.
Rib
Assembly
Welded cup junk subs are placed directly above
the mill or drill bit. For severe milling jobs, it is
customary to run two or three junk subs in tan-
dem above the mill to increase cutting removal
capacity and provide extra stabilization for the
mill.
Cup
Operation
Welded cup junk subs can be run in an open
hole or inside casing. When running inside cas-
ing, hard-faced pads dressed to the same O.D.
as the mill or bit should be used.

When ordering, please specify:


(1) Complete assembly number
(2) Size and type of connections
(3) Cup length

212 • Logan Welded Cup Junk Subs


GENERAL CATALOG

WELDED CUP JUNK SUBS


SIZE RANGE (HOLE SIZE) 4-1/4 to 5-5/8 4-5/8 to 4-7/8 5-1/8 to 5-7/8 6 to 6-3/8 6-1/2 to 7-1/2 7-1/2 to 8-1/2 8-5/8 to 9-5/8
CONNECTION (STD. API REG) 2-3/8 2-7/8 3-1/2 3-1/2 3-1/2 4-1/2 4-1/2
DIAMETER OF BORE 3/4 1-1/4 1-1/2 1-1/2 1-1/2 2-1/4 2-1/4
O.D. OF TOP CONNECTION BODY 3-1/8 3-3/4 4-1/4 4-1/4 4-1/4 5-1/2 5-1/2
O.D. UNDER TOP CONNECTION 2 2-5/8 3-1/8 3-1/4 3-1/4 4-1/2 4-1/2
O.D. OF CUP 3-11/16 4 4-1/2 5 5-1/2 6-5/8 7
I.D. OF CUP 3-5/16 3-5/8 4-1/4 4-9/16 4-7/8 5-15/16 6-9/32
COMPLETE ASSEMBLY Logan Part No. 200-000-010 200-001-010 200-002-010 200-003-010 200-004-010 200-005-010 200-006-010
Bowen No. 20340 15450 15455 15460 15465 15470 15475
Cup Length (in)
10 10 10 10 10 10 10

LONG TYPE
COMPLETE ASSEMBLY Logan Part No. 200-000-020 200-001-020 200-002-020 200-003-020 200-004-020 200-005-020 200-006-020
Bowen No. 20345 17060 17065 17070 17075 17080 17085
Cup Length (in) 20 20 20 20 20 20 20

EXTRA LONG TYPE


COMPLETE ASSEMBLY Logan Part No. 200-000-030 200-001-030 200-002-030 200-003-030 200-004-030 200-005-030 200-006-030
Bowen No. 20295 20300 20305 20310 20315 20320 20325
Cup Length (in) 30 30 30 30 30 30 30

SIZE RANGE (HOLE SIZE) 9-5/8 to 11-5/8 11-1/2 to 13 14-3/4 to 17-1/2


CONNECTION (STD. API REG) 6-5/8 6-5/8 7-5/8
DIAMETER OF BORE 3-1/2 3-1/2 4
O.D. OF TOP CONNECTION BODY 7-3/4 7-3/4 8-7/8
O.D. UNDER TOP CONNECTION 5-3/4 5-3/4 7-5/8
O.D. OF CUP 8-5/8 9-5/8 12-7/8
I.D. OF CUP 7-15/16 8-17/32 11-5/8
COMPLETE ASSEMBLY Logan Part No. 200-007-010 200-008-010 200-009-010
Bowen No. 15480 15485 55306
Cup Length (in) 10 10 10

LONG TYPE
COMPLETE ASSEMBLY Logan Part No. 200-007-020 200-008-020 200-009-020
Bowen No. 17090 17095 62533
Cup Length (in) 20 20 20

EXTRA LONG TYPE


COMPLETE ASSEMBLY Logan Part No. 200-007-030 200-008-030 200-009-030
Bowen No. 20330 20335 62536
Cup Length (in) 30 30 30

Logan Oil Tools reserves the right to change or discontinue designs without notice.

When ordering, please specify:


(1) Complete assembly number
(2) Size and type of connections
(3) Cup length

Logan Welded Cup Junk Subs • 213

You might also like