Slope stability analysis analiza interna

Input data
Project
Settings
Standard - EN 1997 - DA1
Stability analysis
Earthquake analysis : Standard
Verification methodology : according to EN 1997
Design approach : 1 - reduction of actions and soil parameters
Partial factors on actions (A)
Seismic design situation
Combination 1 Combination 2
Unfavourable Favourable Unfavourable Favourable
Permanent actions : G = 1.00 [–] 1.00 [–] 1.00 [–] 1.00 [–]
Variable actions : Q = 1.00 [–] 0.00 [–] 1.00 [–] 0.00 [–]
Water load : w = 1.00 [–] 1.00 [–]

Partial factors for soil parameters (M)

Seismic design situation
Combination 1 Combination 2
Partial factor on internal friction :  = 1.00 [–] 1.25 [–]
Partial factor on effective cohesion : c = 1.00 [–] 1.25 [–]
Partial factor on undrained shear strength : cu = 1.00 [–] 1.40 [–]
Interface
Coordinates of interface points [m]
No. Interface location
x z x z x z
1 0.00 0.00 0.21 -0.02

2 -0.93 -11.50 -0.72 -11.52 -0.72 -11.50

-0.57 -9.70 0.21 -0.02 9.32 -0.02
9.53 0.00

3 -28.75 -11.50 -0.93 -11.50 0.00 0.00

9.53 0.00 10.46 -11.53 34.50 -11.53

4 9.32 -0.02 10.10 -9.70

 Coordinates of interface points [m]
No. Interface location
x z x z x z
5 -0.57 -9.70 10.10 -9.70 10.25 -11.50

6 -0.72 -11.50 10.25 -11.50 10.25 -11.55

10.46 -11.53

7 -28.75 -12.50 34.50 -12.50

8 -28.75 -14.50 34.50 -14.50

9 -28.75 -16.50 34.50 -16.50

10 -28.75 -19.50 34.50 -19.50

Soil parameters - effective stress state

ef cef 
No. Name Pattern
[°] [kPa] [kN/m3]

1 Umpluturi 35.00 0.00 20.30

2 dorosol 22.00 150.00 23.00

3 Argila prafoasa cafenie 19.03 30.00 18.44

4 Argila prafoasa 18.20 33.00 19.03

 ef cef 
No. Name Pattern
[°] [kPa] [kN/m3]

5 Argilanisipoas 16.10 20.00 19.33

Soil parameters - uplift

sat s n
No. Name Pattern
[kN/m3] [kN/m3] [–]

1 Umpluturi 22.00

2 dorosol 24.00

3 Argila prafoasa cafenie 22.00

4 Argila prafoasa 22.00

5 Argilanisipoas 22.00

Soil parameters
Umpluturi
Unit weight :  = 20.30 kN/m3
Stress-state : effective
Angle of internal friction : ef = 35.00 °
Cohesion of soil : cef = 0.00 kPa
Saturated unit weight : sat = 22.00 kN/m3

dorosol
Unit weight :  = 23.00 kN/m3
Stress-state : effective
Angle of internal friction : ef = 22.00 °
Cohesion of soil : cef = 150.00 kPa
Saturated unit weight : sat = 24.00 kN/m3

Argila prafoasa cafenie

Unit weight :  = 18.44 kN/m3
Stress-state : effective
Angle of internal friction : ef = 19.03 °
Cohesion of soil : cef = 30.00 kPa
Saturated unit weight : sat = 22.00 kN/m3

Argila prafoasa
Unit weight :  = 19.03 kN/m3
Stress-state : effective
Angle of internal friction : ef = 18.20 °
Cohesion of soil : cef = 33.00 kPa
Saturated unit weight : sat = 22.00 kN/m3

Argilanisipoas
Unit weight :  = 19.33 kN/m3
Stress-state : effective
Angle of internal friction : ef = 16.10 °
Cohesion of soil : cef = 20.00 kPa
Saturated unit weight : sat = 22.00 kN/m3

Rigid bodies

No. Name Sample
[kN/m3]

1 Cover 25.00

2 Material of cover 25.00

Assigning and surfaces

Coordinates of surface points [m] Assigned
No. Surface position
x z x z soil
1 0.00 0.00 0.21 -0.02
Umpluturi
9.32 -0.02 9.53 0.00

2 10.10 -9.70 9.32 -0.02

Umpluturi
0.21 -0.02 -0.57 -9.70

3 10.25 -11.50 10.10 -9.70

Argila prafoasa cafenie
-0.57 -9.70 -0.72 -11.50

4 -0.93 -11.50 -0.72 -11.52

Cover
-0.72 -11.50 -0.57 -9.70
0.21 -0.02 0.00 0.00

5 10.25 -11.55 10.46 -11.53

Cover
9.53 0.00 9.32 -0.02
10.10 -9.70 10.25 -11.50

6 34.50 -12.50 34.50 -11.53

dorosol
10.46 -11.53 10.25 -11.55
10.25 -11.50 -0.72 -11.50
-0.72 -11.52 -0.93 -11.50
-28.75 -11.50 -28.75 -12.50

7 34.50 -14.50 34.50 -12.50

Argila prafoasa cafenie
-28.75 -12.50 -28.75 -14.50
 Coordinates of surface points [m] Assigned
No. Surface position
x z x z soil
8 34.50 -16.50 34.50 -14.50
Argila prafoasa
-28.75 -14.50 -28.75 -16.50

9 34.50 -19.50 34.50 -16.50

Argilanisipoas
-28.75 -16.50 -28.75 -19.50

10 -28.75 -19.50 -28.75 -24.50

Argilanisipoas
34.50 -24.50 34.50 -19.50

Reinforcements
Point to the left Point to the right Length Strength End of
No. Pull out resist.
x [m] z [m] x [m] z [m] L [m] Rt [kN/m] reinf.
1 9.55 -0.20 2.05 -0.20 7.50 15.67 Tp = 5.69 kN/m2 Fixed
2 9.58 -0.65 2.08 -0.65 7.50 15.67 Tp = 18.48 kN/m2 Fixed
3 9.62 -1.10 2.12 -1.10 7.50 15.67 Tp = 31.27 kN/m2 Fixed
4 9.66 -1.55 2.16 -1.55 7.50 15.67 Tp = 44.06 kN/m2 Fixed
5 9.69 -2.00 2.19 -2.00 7.50 15.67 Tp = 56.86 kN/m2 Fixed
6 9.73 -2.45 2.23 -2.45 7.50 15.67 Tp = 69.65 kN/m2 Fixed
7 9.76 -2.90 2.26 -2.90 7.50 15.67 Tp = 82.44 kN/m2 Fixed
8 9.80 -3.35 2.30 -3.35 7.50 15.67 Tp = 95.24 kN/m2 Fixed
9 9.84 -3.80 2.34 -3.80 7.50 15.67 Tp = 108.03 kN/m2 Fixed
10 9.87 -4.25 2.37 -4.25 7.50 15.67 Tp = 120.82 kN/m2 Fixed
11 9.91 -4.70 2.41 -4.70 7.50 15.67 Tp = 133.61 kN/m2 Fixed
12 9.95 -5.15 2.45 -5.15 7.50 15.67 Tp = 146.41 kN/m2 Fixed
13 9.98 -5.60 2.48 -5.60 7.50 15.67 Tp = 159.20 kN/m2 Fixed
14 10.02 -6.05 2.52 -6.05 7.50 15.67 Tp = 171.99 kN/m2 Fixed
15 10.05 -6.50 2.55 -6.50 7.50 15.67 Tp = 184.78 kN/m2 Fixed
16 10.09 -6.95 2.59 -6.95 7.50 15.67 Tp = 197.58 kN/m2 Fixed
17 10.13 -7.40 2.63 -7.40 7.50 15.67 Tp = 210.37 kN/m2 Fixed
18 10.16 -7.85 2.66 -7.85 7.50 15.67 Tp = 223.16 kN/m2 Fixed
19 10.20 -8.30 2.70 -8.30 7.50 15.67 Tp = 235.96 kN/m2 Fixed
20 10.24 -8.75 2.74 -8.75 7.50 15.67 Tp = 248.75 kN/m2 Fixed
21 10.27 -9.20 2.77 -9.20 7.50 15.67 Tp = 261.54 kN/m2 Fixed
22 10.31 -9.65 2.81 -9.65 7.50 15.67 Tp = 274.33 kN/m2 Fixed
23 10.34 -10.10 2.84 -10.10 7.50 15.67 Tp = 140.92 kN/m2 Fixed
24 10.38 -10.55 2.88 -10.55 7.50 15.67 Tp = 146.65 kN/m2 Fixed
25 10.42 -11.00 2.92 -11.00 7.50 15.67 Tp = 152.37 kN/m2 Fixed
26 -0.02 -0.25 7.48 -0.25 7.50 15.67 Tp = 7.11 kN/m2 Fixed
27 -0.06 -0.70 7.44 -0.70 7.50 15.67 Tp = 19.90 kN/m2 Fixed
28 -0.09 -1.15 7.41 -1.15 7.50 15.67 Tp = 32.69 kN/m2 Fixed
29 -0.13 -1.60 7.37 -1.60 7.50 15.67 Tp = 45.49 kN/m2 Fixed
30 -0.17 -2.05 7.33 -2.05 7.50 15.67 Tp = 58.28 kN/m2 Fixed
31 -0.20 -2.50 7.30 -2.50 7.50 15.67 Tp = 71.07 kN/m2 Fixed
32 -0.24 -2.95 7.26 -2.95 7.50 15.67 Tp = 83.86 kN/m2 Fixed
33 -0.27 -3.40 7.23 -3.40 7.50 15.67 Tp = 96.66 kN/m2 Fixed
34 -0.31 -3.85 7.19 -3.85 7.50 15.67 Tp = 109.45 kN/m2 Fixed
 Point to the left Point to the right Length Strength End of
No. Pull out resist.
x [m] z [m] x [m] z [m] L [m] Rt [kN/m] reinf.
35 -0.35 -4.30 7.15 -4.30 7.50 15.67 Tp = 122.24 kN/m2 Fixed
36 -0.38 -4.75 7.12 -4.75 7.50 15.67 Tp = 135.04 kN/m2 Fixed
37 -0.42 -5.20 7.08 -5.20 7.50 15.67 Tp = 147.83 kN/m2 Fixed
38 -0.46 -5.65 7.04 -5.65 7.50 15.67 Tp = 160.62 kN/m2 Fixed
39 -0.49 -6.10 7.01 -6.10 7.50 15.67 Tp = 173.41 kN/m2 Fixed
40 -0.53 -6.55 6.97 -6.55 7.50 15.67 Tp = 186.21 kN/m2 Fixed
41 -0.57 -7.00 6.93 -7.00 7.50 15.67 Tp = 199.00 kN/m2 Fixed
42 -0.60 -7.45 6.90 -7.45 7.50 15.67 Tp = 211.79 kN/m2 Fixed
43 -0.64 -7.90 6.86 -7.90 7.50 15.67 Tp = 224.58 kN/m2 Fixed
44 -0.68 -8.35 6.82 -8.35 7.50 15.67 Tp = 237.38 kN/m2 Fixed
45 -0.71 -8.80 6.79 -8.80 7.50 15.67 Tp = 250.17 kN/m2 Fixed
46 -0.75 -9.25 6.75 -9.25 7.50 15.67 Tp = 262.96 kN/m2 Fixed
47 -0.78 -9.70 6.72 -9.70 7.50 15.67 Tp = 275.76 kN/m2 Fixed
48 -0.82 -10.15 6.68 -10.15 7.50 15.67 Tp = 141.56 kN/m2 Fixed
49 -0.86 -10.60 6.64 -10.60 7.50 15.67 Tp = 147.28 kN/m2 Fixed
50 -0.89 -11.05 6.61 -11.05 7.50 15.67 Tp = 153.01 kN/m2 Fixed
Water
Water type : No water
Tensile crack
Tensile crack not inputted.
Earthquake
Horizontal seismic coefficient : Kh = 0.49
Vertical seismic coefficient : Kv = 0.16
Settings of the stage of construction
Design situation : seismic
Results (Stage of construction 1)
Analysis 1
Circular slip surface
Slip surface parameters
x= -4.67 [m] 1 = -33.97 [°]
Center : Angles :
z= 0.02 [m] 2 = 89.92 [°]
Radius : R= 13.89 [m]
The slip surface after optimization.
The restrictions of points of circular slip surface
Keep the left end point of the slip surface
Keep the right end point of the slip surface

Reinforcement forces
Combination 1
Reinforcement Force [kN/m]
1 15.67
2 15.67
3 15.67
4 15.67
5 15.67
6 15.67
7 15.67
8 15.67
9 15.67
10 15.67
11 15.67
12 15.67
13 15.67
 14 15.67
15 15.67
16 15.67
17 15.67
18 15.67
19 15.67
20 15.67
21 15.67
22 15.67
23 15.67
24 15.67
25 15.67
26 0.00
27 0.00
28 0.00
29 0.00
30 0.00
31 0.00
32 0.00
33 0.00
34 0.00
35 0.00
36 0.00
37 0.00
38 0.00
39 0.00
40 0.00
41 0.00
42 0.00
43 15.67
44 15.67
45 15.67
46 15.67
47 15.67
48 15.67
49 15.67
50 15.67
Combination 2
Reinforcement Force [kN/m]
1 15.67
2 15.67
3 15.67
4 15.67
5 15.67
6 15.67
7 15.67
8 15.67
9 15.67
10 15.67
11 15.67
12 15.67
13 15.67
14 15.67
15 15.67
16 15.67
17 15.67
18 15.67
19 15.67
20 15.67
21 15.67
22 15.67
23 15.67
24 15.67
25 15.67
26 0.00
 27 0.00
28 0.00
29 0.00
30 0.00
31 0.00
32 0.00
33 0.00
34 0.00
35 0.00
36 0.00
37 0.00
38 0.00
39 0.00
40 0.00
41 0.00
42 0.00
43 15.67
44 15.67
45 15.67
46 15.67
47 15.67
48 15.67
49 15.67
50 15.67
Slope stability verification (Spencer)
Combination 1
Utilization : 79.6 %
Slope stability ACCEPTABLE
Combination 2
Utilization : 99.5 %
Slope stability ACCEPTABLE
Optimized slip surface for : Combination 2

Slope stability analysis cu cutremur

Input data
Project
Settings
Standard - EN 1997 - DA1
Stability analysis
Earthquake analysis : Standard
Verification methodology : according to EN 1997
Design approach : 1 - reduction of actions and soil parameters
Partial factors on actions (A)
Seismic design situation
Combination 1 Combination 2
Unfavourable Favourable Unfavourable Favourable
Permanent actions : G = 1.00 [–] 1.00 [–] 1.00 [–] 1.00 [–]
Variable actions : Q = 1.00 [–] 0.00 [–] 1.00 [–] 0.00 [–]
Water load : w = 1.00 [–] 1.00 [–]

Partial factors for soil parameters (M)

Seismic design situation
Combination 1 Combination 2
Partial factor on internal friction :  = 1.00 [–] 1.25 [–]
Partial factor on effective cohesion : c = 1.00 [–] 1.25 [–]
Partial factor on undrained shear strength : cu = 1.00 [–] 1.40 [–]
Interface
Coordinates of interface points [m]
No. Interface location
x z x z x z
1 0.00 0.00 0.21 -0.02

2 -0.93 -11.50 -0.72 -11.52 -0.72 -11.50

-0.57 -9.70 0.21 -0.02 9.32 -0.02
9.53 0.00

3 -28.75 -11.50 -0.93 -11.50 0.00 0.00

9.53 0.00 10.46 -11.53 34.50 -11.53

4 9.32 -0.02 10.10 -9.70

5 -0.57 -9.70 10.10 -9.70 10.25 -11.50

6 -0.72 -11.50 10.25 -11.50 10.25 -11.55

10.46 -11.53

7 -28.75 -12.50 34.50 -12.50

8 -28.75 -14.50 34.50 -14.50

 Coordinates of interface points [m]
No. Interface location
x z x z x z
9 -28.75 -16.50 34.50 -16.50

10 -28.75 -19.50 34.50 -19.50

Soil parameters - effective stress state

ef cef 
No. Name Pattern
[°] [kPa] [kN/m3]

1 Umpluturi 35.00 0.00 20.30

2 dorosol 22.00 150.00 23.00

3 Argila prafoasa cafenie 19.03 30.00 18.44

4 Argila prafoasa 18.20 33.00 19.03

5 Argilanisipoas 16.10 20.00 19.33

Soil parameters - uplift

sat s n
No. Name Pattern
[kN/m3] [kN/m3] [–]

1 Umpluturi 22.00

2 dorosol 24.00

3 Argila prafoasa cafenie 22.00

4 Argila prafoasa 22.00

5 Argilanisipoas 22.00

Soil parameters
Umpluturi
Unit weight :  = 20.30 kN/m3
Stress-state : effective
Angle of internal friction : ef = 35.00 °
Cohesion of soil : cef = 0.00 kPa
Saturated unit weight : sat = 22.00 kN/m3

dorosol
Unit weight :  = 23.00 kN/m3
Stress-state : effective
Angle of internal friction : ef = 22.00 °
Cohesion of soil : cef = 150.00 kPa
Saturated unit weight : sat = 24.00 kN/m3

Argila prafoasa cafenie

Unit weight :  = 18.44 kN/m3
Stress-state : effective
Angle of internal friction : ef = 19.03 °
Cohesion of soil : cef = 30.00 kPa
Saturated unit weight : sat = 22.00 kN/m3

Argila prafoasa
Unit weight :  = 19.03 kN/m3
Stress-state : effective
Angle of internal friction : ef = 18.20 °
Cohesion of soil : cef = 33.00 kPa
Saturated unit weight : sat = 22.00 kN/m3

Argilanisipoas
Unit weight :  = 19.33 kN/m3
Stress-state : effective
Angle of internal friction : ef = 16.10 °
Cohesion of soil : cef = 20.00 kPa
Saturated unit weight : sat = 22.00 kN/m3

Rigid bodies

No. Name Sample
[kN/m3]

1 Cover 25.00

2 Material of cover 25.00

Assigning and surfaces

Coordinates of surface points [m] Assigned
No. Surface position
x z x z soil
1 0.00 0.00 0.21 -0.02
Umpluturi
9.32 -0.02 9.53 0.00

2 10.10 -9.70 9.32 -0.02

Umpluturi
0.21 -0.02 -0.57 -9.70
 Coordinates of surface points [m] Assigned
No. Surface position
x z x z soil
3 10.25 -11.50 10.10 -9.70
Argila prafoasa cafenie
-0.57 -9.70 -0.72 -11.50

4 -0.93 -11.50 -0.72 -11.52

Cover
-0.72 -11.50 -0.57 -9.70
0.21 -0.02 0.00 0.00

5 10.25 -11.55 10.46 -11.53

Cover
9.53 0.00 9.32 -0.02
10.10 -9.70 10.25 -11.50

6 34.50 -12.50 34.50 -11.53

dorosol
10.46 -11.53 10.25 -11.55
10.25 -11.50 -0.72 -11.50
-0.72 -11.52 -0.93 -11.50
-28.75 -11.50 -28.75 -12.50

7 34.50 -14.50 34.50 -12.50

Argila prafoasa cafenie
-28.75 -12.50 -28.75 -14.50

8 34.50 -16.50 34.50 -14.50

Argila prafoasa
-28.75 -14.50 -28.75 -16.50

9 34.50 -19.50 34.50 -16.50

Argilanisipoas
-28.75 -16.50 -28.75 -19.50

10 -28.75 -19.50 -28.75 -24.50

Argilanisipoas
34.50 -24.50 34.50 -19.50

Reinforcements
Point to the left Point to the right Length Strength End of
No. Pull out resist.
x [m] z [m] x [m] z [m] L [m] Rt [kN/m] reinf.
1 9.55 -0.20 2.05 -0.20 7.50 15.67 Tp = 5.69 kN/m2 Fixed
2 9.58 -0.65 2.08 -0.65 7.50 15.67 Tp = 18.48 kN/m2 Fixed
3 9.62 -1.10 2.12 -1.10 7.50 15.67 Tp = 31.27 kN/m2 Fixed
4 9.66 -1.55 2.16 -1.55 7.50 15.67 Tp = 44.06 kN/m2 Fixed
5 9.69 -2.00 2.19 -2.00 7.50 15.67 Tp = 56.86 kN/m2 Fixed
6 9.73 -2.45 2.23 -2.45 7.50 15.67 Tp = 69.65 kN/m2 Fixed
 Point to the left Point to the right Length Strength End of
No. Pull out resist.
x [m] z [m] x [m] z [m] L [m] Rt [kN/m] reinf.
7 9.76 -2.90 2.26 -2.90 7.50 15.67 Tp = 82.44 kN/m2 Fixed
8 9.80 -3.35 2.30 -3.35 7.50 15.67 Tp = 95.24 kN/m2 Fixed
9 9.84 -3.80 2.34 -3.80 7.50 15.67 Tp = 108.03 kN/m2 Fixed
10 9.87 -4.25 2.37 -4.25 7.50 15.67 Tp = 120.82 kN/m2 Fixed
11 9.91 -4.70 2.41 -4.70 7.50 15.67 Tp = 133.61 kN/m2 Fixed
12 9.95 -5.15 2.45 -5.15 7.50 15.67 Tp = 146.41 kN/m2 Fixed
13 9.98 -5.60 2.48 -5.60 7.50 15.67 Tp = 159.20 kN/m2 Fixed
14 10.02 -6.05 2.52 -6.05 7.50 15.67 Tp = 171.99 kN/m2 Fixed
15 10.05 -6.50 2.55 -6.50 7.50 15.67 Tp = 184.78 kN/m2 Fixed
16 10.09 -6.95 2.59 -6.95 7.50 15.67 Tp = 197.58 kN/m2 Fixed
17 10.13 -7.40 2.63 -7.40 7.50 15.67 Tp = 210.37 kN/m2 Fixed
18 10.16 -7.85 2.66 -7.85 7.50 15.67 Tp = 223.16 kN/m2 Fixed
19 10.20 -8.30 2.70 -8.30 7.50 15.67 Tp = 235.96 kN/m2 Fixed
20 10.24 -8.75 2.74 -8.75 7.50 15.67 Tp = 248.75 kN/m2 Fixed
21 10.27 -9.20 2.77 -9.20 7.50 15.67 Tp = 261.54 kN/m2 Fixed
22 10.31 -9.65 2.81 -9.65 7.50 15.67 Tp = 274.33 kN/m2 Fixed
23 10.34 -10.10 2.84 -10.10 7.50 15.67 Tp = 140.92 kN/m2 Fixed
24 10.38 -10.55 2.88 -10.55 7.50 15.67 Tp = 146.65 kN/m2 Fixed
25 10.42 -11.00 2.92 -11.00 7.50 15.67 Tp = 152.37 kN/m2 Fixed
26 -0.02 -0.25 7.48 -0.25 7.50 15.67 Tp = 7.11 kN/m2 Fixed
27 -0.06 -0.70 7.44 -0.70 7.50 15.67 Tp = 19.90 kN/m2 Fixed
28 -0.09 -1.15 7.41 -1.15 7.50 15.67 Tp = 32.69 kN/m2 Fixed
29 -0.13 -1.60 7.37 -1.60 7.50 15.67 Tp = 45.49 kN/m2 Fixed
30 -0.17 -2.05 7.33 -2.05 7.50 15.67 Tp = 58.28 kN/m2 Fixed
31 -0.20 -2.50 7.30 -2.50 7.50 15.67 Tp = 71.07 kN/m2 Fixed
32 -0.24 -2.95 7.26 -2.95 7.50 15.67 Tp = 83.86 kN/m2 Fixed
33 -0.27 -3.40 7.23 -3.40 7.50 15.67 Tp = 96.66 kN/m2 Fixed
34 -0.31 -3.85 7.19 -3.85 7.50 15.67 Tp = 109.45 kN/m2 Fixed
35 -0.35 -4.30 7.15 -4.30 7.50 15.67 Tp = 122.24 kN/m2 Fixed
36 -0.38 -4.75 7.12 -4.75 7.50 15.67 Tp = 135.04 kN/m2 Fixed
37 -0.42 -5.20 7.08 -5.20 7.50 15.67 Tp = 147.83 kN/m2 Fixed
38 -0.46 -5.65 7.04 -5.65 7.50 15.67 Tp = 160.62 kN/m2 Fixed
39 -0.49 -6.10 7.01 -6.10 7.50 15.67 Tp = 173.41 kN/m2 Fixed
40 -0.53 -6.55 6.97 -6.55 7.50 15.67 Tp = 186.21 kN/m2 Fixed
41 -0.57 -7.00 6.93 -7.00 7.50 15.67 Tp = 199.00 kN/m2 Fixed
42 -0.60 -7.45 6.90 -7.45 7.50 15.67 Tp = 211.79 kN/m2 Fixed
43 -0.64 -7.90 6.86 -7.90 7.50 15.67 Tp = 224.58 kN/m2 Fixed
44 -0.68 -8.35 6.82 -8.35 7.50 15.67 Tp = 237.38 kN/m2 Fixed
45 -0.71 -8.80 6.79 -8.80 7.50 15.67 Tp = 250.17 kN/m2 Fixed
46 -0.75 -9.25 6.75 -9.25 7.50 15.67 Tp = 262.96 kN/m2 Fixed
47 -0.78 -9.70 6.72 -9.70 7.50 15.67 Tp = 275.76 kN/m2 Fixed
48 -0.82 -10.15 6.68 -10.15 7.50 15.67 Tp = 141.56 kN/m2 Fixed
49 -0.86 -10.60 6.64 -10.60 7.50 15.67 Tp = 147.28 kN/m2 Fixed
50 -0.89 -11.05 6.61 -11.05 7.50 15.67 Tp = 153.01 kN/m2 Fixed
Water
Water type : No water
Tensile crack
Tensile crack not inputted.
Earthquake
Horizontal seismic coefficient : Kh = 0.49
Vertical seismic coefficient : Kv = 0.16
Settings of the stage of construction
Design situation : seismic
Results (Stage of construction 1)
Analysis 1
Circular slip surface
Slip surface parameters
x= -4.67 [m] 1 = -33.97 [°]
Center : Angles :
z= 0.02 [m] 2 = 89.92 [°]
Radius : R= 13.89 [m]
The slip surface after optimization.
The restrictions of points of circular slip surface
Keep the left end point of the slip surface
Keep the right end point of the slip surface

Reinforcement forces
Combination 1
Reinforcement Force [kN/m]
1 15.67
2 15.67
3 15.67
4 15.67
5 15.67
6 15.67
7 15.67
8 15.67
9 15.67
10 15.67
11 15.67
12 15.67
13 15.67
14 15.67
15 15.67
16 15.67
17 15.67
18 15.67
19 15.67
20 15.67
21 15.67
22 15.67
23 15.67
24 15.67
25 15.67
26 0.00
27 0.00
28 0.00
29 0.00
30 0.00
31 0.00
32 0.00
33 0.00
34 0.00
35 0.00
36 0.00
37 0.00
38 0.00
39 0.00
40 0.00
41 0.00
42 0.00
43 15.67
44 15.67
 45 15.67
46 15.67
47 15.67
48 15.67
49 15.67
50 15.67
Combination 2
Reinforcement Force [kN/m]
1 15.67
2 15.67
3 15.67
4 15.67
5 15.67
6 15.67
7 15.67
8 15.67
9 15.67
10 15.67
11 15.67
12 15.67
13 15.67
14 15.67
15 15.67
16 15.67
17 15.67
18 15.67
19 15.67
20 15.67
21 15.67
22 15.67
23 15.67
24 15.67
25 15.67
26 0.00
27 0.00
28 0.00
29 0.00
30 0.00
31 0.00
32 0.00
33 0.00
34 0.00
35 0.00
36 0.00
37 0.00
38 0.00
39 0.00
40 0.00
41 0.00
42 0.00
43 15.67
44 15.67
45 15.67
46 15.67
47 15.67
48 15.67
49 15.67
50 15.67
Slope stability verification (Spencer)
Combination 1
Utilization : 79.6 %
Slope stability ACCEPTABLE
Combination 2
Utilization : 99.5 %
Slope stability ACCEPTABLE
Optimized slip surface for : Combination 2
Analiza globala
Analysis of reinforced slopes
Input data
Project
Task : ax bretea centura dreapta
Customer : IRIDEX
Author : LN
Date : 07-05-2018
Settings
Standard - EN 1997 - DA1
Materials and standards
Concrete structures : EN 1992-1-1 (EC2)
Coefficients EN 1992-1-1 : standard
Wall analysis
Active earth pressure calculation : Coulomb
Passive earth pressure calculation : Caquot-Kerisel
Earthquake analysis : Mononobe-Okabe
Shape of earth wedge : Calculate as skew
Allowable eccentricity : 0.333
Internal stability : Standard - straight slip surface
Verification methodology : according to EN 1997
Design approach : 1 - reduction of actions and soil parameters
Partial factors on actions (A)
Permanent design situation
Combination 1 Combination 2
Unfavourable Favourable Unfavourable Favourable
Permanent actions : G = 1.35 [–] 1.00 [–] 1.00 [–] 1.00 [–]
Variable actions : Q = 1.50 [–] 0.00 [–] 1.30 [–] 0.00 [–]
Water load : w = 1.35 [–] 1.00 [–]

Partial factors for soil parameters (M)

Permanent design situation
Combination 1 Combination 2
Partial factor on internal friction :  = 1.00 [–] 1.25 [–]
Partial factor on effective cohesion : c = 1.00 [–] 1.25 [–]
Partial factor on undrained shear strength : cu = 1.00 [–] 1.40 [–]
Partial factor on Poisson's ratio : v = 1.00 [–] 1.00 [–]

Partial factors for variable actions

Permanent design situation
Factor for combination value : 0 = 0.70 [–]
Factor for frequent value : 1 = 0.50 [–]
Factor for quasi-permanent value : 2 = 0.30 [–]

Partial factors on actions (A)

Seismic design situation
Combination 1 Combination 2
Unfavourable Favourable Unfavourable Favourable
Permanent actions : G = 1.00 [–] 1.00 [–] 1.00 [–] 1.00 [–]
Variable actions : Q = 1.00 [–] 0.00 [–] 1.00 [–] 0.00 [–]
Water load : w = 1.00 [–] 1.00 [–]
 Partial factors for soil parameters (M)
Seismic design situation
Combination 1 Combination 2
Partial factor on internal friction :  = 1.00 [–] 1.25 [–]
Partial factor on effective cohesion : c = 1.00 [–] 1.25 [–]
Partial factor on undrained shear strength : cu = 1.00 [–] 1.40 [–]
Partial factor on Poisson's ratio : v = 1.00 [–] 1.00 [–]
Stability analysis
Verification methodology : according to EN 1997
Design approach : 1 - reduction of actions and soil parameters
Partial factors on actions (A)
Permanent design situation
Combination 1 Combination 2
Unfavourable Favourable Unfavourable Favourable
Permanent actions : G = 1.35 [–] 1.00 [–] 1.00 [–] 1.00 [–]
Variable actions : Q = 1.50 [–] 0.00 [–] 1.30 [–] 0.00 [–]
Water load : w = 1.35 [–] 1.00 [–]

Partial factors for soil parameters (M)

Permanent design situation
Combination 1 Combination 2
Partial factor on internal friction :  = 1.00 [–] 1.25 [–]
Partial factor on effective cohesion : c = 1.00 [–] 1.25 [–]
Partial factor on undrained shear strength : cu = 1.00 [–] 1.40 [–]

Partial factors on actions (A)

Seismic design situation
Combination 1 Combination 2
Unfavourable Favourable Unfavourable Favourable
Permanent actions : G = 1.00 [–] 1.00 [–] 1.00 [–] 1.00 [–]
Variable actions : Q = 1.00 [–] 0.00 [–] 1.00 [–] 0.00 [–]
Water load : w = 1.00 [–] 1.00 [–]

Partial factors for soil parameters (M)

Seismic design situation
Combination 1 Combination 2
Partial factor on internal friction :  = 1.00 [–] 1.25 [–]
Partial factor on effective cohesion : c = 1.00 [–] 1.25 [–]
Partial factor on undrained shear strength : cu = 1.00 [–] 1.40 [–]
Geometry of structure
Embankment height h1 = 11.50 m
h2 = 11.53 m
Embankment length l1 = 0.93 m
l2 = 9.53 m
l3 = 0.93 m
Cover thickness tc = 0.21 m
Material
Cover material
Unit weight  = 25.00 kN/m3
Shear resistance Rs = 35.00 kPa
Types of reinforcements
Type of
Name reinforcemen Line type Reinforcement strength Coefficient
No. t
Tult[kN/m] Rt[kN/m] Cds[–] Ci[–]
1 Tensar RE520 Tensar RE520 52.80 15.67 0.90 0.90
2 Tensar RE540 Tensar RE540 64.50 19.14 0.90 0.90
3 Tensar RE560 Tensar RE560 88.70 26.32 0.90 0.90
Reinforcement details
1. Tensar RE520
Short-term char. strength Tult = 52.80 kN/m
Long-term design strength Rt = 15.67 kN/m
Overall coeff. of model uncertainty FSUNC = 1.50
Calculate reduction factors
Life time : 120 years
Creep red. factor RFCR = 2.10
Chemistry : pH 4.0-12.5
Durability red. factor RFD = 1.00
Partical size : < 37.5 mm
Installation damage red. factor RFID = 1.07
2. Tensar RE540
Short-term char. strength Tult = 64.50 kN/m
Long-term design strength Rt = 19.14 kN/m
Overall coeff. of model uncertainty FSUNC = 1.50
Calculate reduction factors
Life time : 120 years
Creep red. factor RFCR = 2.10
Chemistry : pH 4.0-12.5
Durability red. factor RFD = 1.00
Partical size : < 37.5 mm
Installation damage red. factor RFID = 1.07
3. Tensar RE560
Short-term char. strength Tult = 88.70 kN/m
Long-term design strength Rt = 26.32 kN/m
Overall coeff. of model uncertainty FSUNC = 1.50
Calculate reduction factors
Life time : 120 years
Creep red. factor RFCR = 2.10
Chemistry : pH 4.0-12.5
Durability red. factor RFD = 1.00
Partical size : < 37.5 mm
Installation damage red. factor RFID = 1.07
Reinforcement
Height of
Spacing of
first
Number Type of reinforcement reinforceme Reinforcements geometry
reinforceme
nts
No. nt
of
reinforceme hr[m] h[m]
nts
1 25 Tensar RE520 0.45 0.45 identical length of reinforcements
2 25 Tensar RE520 0.45 0.50 identical length of reinforcements
Reinforcement details
Reinforcement No. 1
Reinforcement type : Tensar RE520
Number of reinforcements 25
Reinforcement geometry : identical length of reinforcements
Reinforcement length : 7.50 m
Reinforceme
Origin End Height from bottom Length
nt
No. l1[m] l2[m] h[m] l[m]
1 -0.89 6.61 0.45 7.50
2 -0.86 6.64 0.90 7.50
3 -0.82 6.68 1.35 7.50
4 -0.78 6.72 1.80 7.50
5 -0.75 6.75 2.25 7.50
6 -0.71 6.79 2.70 7.50
7 -0.68 6.82 3.15 7.50
8 -0.64 6.86 3.60 7.50
9 -0.60 6.90 4.05 7.50
10 -0.57 6.93 4.50 7.50
11 -0.53 6.97 4.95 7.50
12 -0.49 7.01 5.40 7.50
13 -0.46 7.04 5.85 7.50
14 -0.42 7.08 6.30 7.50
15 -0.38 7.12 6.75 7.50
16 -0.35 7.15 7.20 7.50
17 -0.31 7.19 7.65 7.50
18 -0.27 7.23 8.10 7.50
19 -0.24 7.26 8.55 7.50
20 -0.20 7.30 9.00 7.50
21 -0.17 7.33 9.45 7.50
22 -0.13 7.37 9.90 7.50
23 -0.09 7.41 10.35 7.50
24 -0.06 7.44 10.80 7.50
25 -0.02 7.48 11.25 7.50
Reinforcement No. 2
Reinforcement type : Tensar RE520
Number of reinforcements 25
Reinforcement geometry : identical length of reinforcements
Reinforcement length : 7.50 m
Reinforceme
Origin End Height from bottom Length
nt
No. l1[m] l2[m] h[m] l[m]
1 10.42 2.92 0.50 -7.50
2 10.38 2.88 0.95 -7.50
3 10.34 2.84 1.40 -7.50
4 10.31 2.81 1.85 -7.50
5 10.27 2.77 2.30 -7.50
6 10.24 2.74 2.75 -7.50
7 10.20 2.70 3.20 -7.50
8 10.16 2.66 3.65 -7.50
9 10.13 2.63 4.10 -7.50
10 10.09 2.59 4.55 -7.50
11 10.05 2.55 5.00 -7.50
12 10.02 2.52 5.45 -7.50
13 9.98 2.48 5.90 -7.50
14 9.95 2.45 6.35 -7.50
15 9.91 2.41 6.80 -7.50
16 9.87 2.37 7.25 -7.50
17 9.84 2.34 7.70 -7.50
18 9.80 2.30 8.15 -7.50
 Reinforceme
Origin End Height from bottom Length
nt
No. l1[m] l2[m] h[m] l[m]
19 9.76 2.26 8.60 -7.50
20 9.73 2.23 9.05 -7.50
21 9.69 2.19 9.50 -7.50
22 9.66 2.16 9.95 -7.50
23 9.62 2.12 10.40 -7.50
24 9.58 2.08 10.85 -7.50
25 9.55 2.05 11.30 -7.50
Soil parameters
Umpluturi
Unit weight :  = 20.30 kN/m3
Angle of internal friction : ef = 35.00 °
Cohesion of soil : cef = 0.00 kPa
Angle of friction struc.-soil :  = 20.30 °
Saturated unit weight : sat = 22.00 kN/m3

dorosol
Unit weight :  = 23.00 kN/m3
Angle of internal friction : ef = 22.00 °
Cohesion of soil : cef = 150.00 kPa
Angle of friction struc.-soil :  = 13.00 °
Saturated unit weight : sat = 24.00 kN/m3

Argila prafoasa cafenie

Unit weight :  = 18.44 kN/m3
Angle of internal friction : ef = 19.03 °
Cohesion of soil : cef = 30.00 kPa
Angle of friction struc.-soil :  = 12.68 °
Saturated unit weight : sat = 22.00 kN/m3

Argila prafoasa
Unit weight :  = 19.03 kN/m3
Angle of internal friction : ef = 18.20 °
Cohesion of soil : cef = 33.00 kPa
Angle of friction struc.-soil :  = 12.13 °
Saturated unit weight : sat = 22.00 kN/m3

Argilanisipoas
Unit weight :  = 19.33 kN/m3
Angle of internal friction : ef = 16.10 °
Cohesion of soil : cef = 20.00 kPa
Angle of friction struc.-soil :  = 10.73 °
Saturated unit weight : sat = 22.00 kN/m3

Geological profile and assigned soils

Layer
No. Assigned soil Pattern
[m]

1 9.70 Umpluturi

2 1.80 Argila prafoasa cafenie

3 1.00 dorosol

4 2.00 Argila prafoasa cafenie

 Layer
No. Assigned soil Pattern
[m]

5 2.00 Argila prafoasa

6 3.00 Argilanisipoas

7 - Argilanisipoas

Water influence
Ground water table is not considered.

Input surface surcharges

Surcharge Mag.1 Mag.2 Ord.x Length
No. modificati Action
new [kN/m2] [kN/m2] x [m] l [m]
on
1 YES permanent 26.00 2.00 7.50
No. Name
1 Trafic
Resistance on front face of the structure
Resistance on front face of the structure is not considered.

Settings of the stage of construction

Design situation : permanent

Global stability analysis No. 1 (Stage of construction 1)

Slip surface parameters
(slip surface after optimization)
Center S = (-4.67;-0.02) m
Radius r = 13.89 m
Angle 1 = -33.97 °
2 = 89.92 °
The restrictions of points of circular slip surface
Keep the left end point of the slip surface
Keep the right end point of the slip surface
Slope stability check (Spencer)
Utilization = 68.52 %
Slope stability is SATISFACTORY

Input data (Stage of construction 2)

Geological profile and assigned soils
Layer
No. Assigned soil Pattern
[m]

1 9.70 Umpluturi

2 1.80 Argila prafoasa cafenie

3 1.00 dorosol

4 2.00 Argila prafoasa cafenie

5 2.00 Argila prafoasa

6 3.00 Argilanisipoas
 Layer
No. Assigned soil Pattern
[m]

7 - Argilanisipoas

Water influence
Ground water table is not considered.

Input surface surcharges

Surcharge Mag.1 Mag.2 Ord.x Length
No. modificati Action
new [kN/m2] [kN/m2] x [m] l [m]
on
1 YES permanent 26.00 2.00 7.50
No. Name
1 Trafic
Resistance on front face of the structure
Resistance on front face of the structure is not considered.

Earthquake
Factor of horizontal acceleration Kh = 0.4860
Factor of vertical acceleration Kv = 0.1600
Settings of the stage of construction
Design situation : seismic

Global stability analysis No. 1 (Stage of construction 2)

Slip surface parameters
(slip surface after optimization)
Center S = (-4.67;-0.02) m
Radius r = 13.89 m
Angle 1 = -33.97 °
2 = 89.92 °
The restrictions of points of circular slip surface
Keep the left end point of the slip surface
Keep the right end point of the slip surface
Slope stability check (Spencer)
Utilization = 99.53 %
Slope stability is SATISFACTORY