Scribd
Upload
39 views1 page

Setting Information Setting Positions: A) HSL-3-SH, HSL-3-SK and HSL-3-SKR Can Only Be Set in Position 1

This document provides setting information for HSL-3 and HSL-3-R anchors including: - Acceptable setting positions of 1, 2, or 3 for certain anchor models and sizes - Details on drill bit sizes, clearance holes, and fixture thicknesses for different anchor sizes and settings - Effective anchorage depths, minimum drill hole depths, and minimum concrete member thicknesses for varying anchor sizes and settings - Torque specifications for installation of different sized anchors

Uploaded by

Praveen Varma V
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
39 views1 page

Setting Information Setting Positions: A) HSL-3-SH, HSL-3-SK and HSL-3-SKR Can Only Be Set in Position 1

This document provides setting information for HSL-3 and HSL-3-R anchors including: - Acceptable setting positions of 1, 2, or 3 for certain anchor models and sizes - Details on drill bit sizes, clearance holes, and fixture thicknesses for different anchor sizes and settings - Effective anchorage depths, minimum drill hole depths, and minimum concrete member thicknesses for varying anchor sizes and settings - Torque specifications for installation of different sized anchors

Uploaded by

Praveen Varma V
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Setting information

Setting positions a)

Setting position

Setting position

Setting position


a) HSL-3-SH, HSL-3-SK and HSL-3-SKR can only be set in position 1.

Setting details for HSL-3 / HSL-3-R

Anchor version M8 M10 M12

Nominal diameter of drill bit d0 [mm] 12 15 18


Max. cutting diameter of drill bit dcut [mm] 12,5 15,5 18,5
Max. diameter of clearance hole
df [mm] 14 17 20
in the fixture
Setting position i         
Fixture thickness tfix,1 [mm] 5-200 5-200 5-200
Effective fixture thickness tfix,i tfix,11) - Δi
Reduction of fixture thickness Δi [mm] 0 20 40 0 20 40 0 25 50
Effective anchorage depth hef,i [mm] 60 80 100 70 90 110 80 105 130
Min. depth of drill hole h1, i [mm] 80 100 120 90 110 130 105 130 155
Min. thickness of concrete member hmin,i [mm] 120 170 195 140 195 215 160 225 250
Width across flats SW [mm] 13 17 19
Installation torque (HSL-3-R) Tinst [Nm] 25 50 (35) 80
Anchor version M16 M20 M24 a)
Nominal diameter of drill bit d0 [mm] 24 28 32
Max. cutting diameter of drill bit dcut [mm] 24,55 28,55 32,7
Max. diameter of clearance hole in
df [mm] 26 31 35
the fixture
Setting position i         
Fixture thickness tfix1 [mm] 10-200 10-200 10-200
Effective fixture thickness tfix,i tfix,11) - Δi
Reduction of fixture thickness Δi [mm] 0 25 50 0 30 60 0 30 60
Effective anchorage depth hef,i [mm] 100 125 150 125 155 185 150 180 210
Min. depth of drill hole h1,i [mm] 125 150 175 155 185 215 180 210 240
Min. thickness of concrete member hmin,i [mm] 200 275 300 250 380 410 300 405 435
Width across flats SW [mm] 24 30 36
Installation torque Tinst [Nm] 120 200 250
a) Anchor version M24 only available for HSL-3 carbon steel version.

Updated: Dec-17 10

You might also like