Scribd
Upload
126 views

Lab Excersice N0 1

This document describes a laboratory exercise to obtain the voltage-current (V-I) characteristics of a PN junction diode. The exercise involves connecting a diode, resistor, DC power supply and multimeters in a circuit. Forward and reverse bias measurements are taken by varying the supply voltage and recording the voltage across and current through the diode. A graph is drawn of the V-I characteristics showing the diode behaves like a closed switch under forward bias and open switch under reverse bias. Questions are provided at the end about diode specifications, breakdown voltage, applications and testing.

Uploaded by

legasu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
126 views

Lab Excersice N0 1

This document describes a laboratory exercise to obtain the voltage-current (V-I) characteristics of a PN junction diode. The exercise involves connecting a diode, resistor, DC power supply and multimeters in a circuit. Forward and reverse bias measurements are taken by varying the supply voltage and recording the voltage across and current through the diode. A graph is drawn of the V-I characteristics showing the diode behaves like a closed switch under forward bias and open switch under reverse bias. Questions are provided at the end about diode specifications, breakdown voltage, applications and testing.

Uploaded by

legasu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

NATIONAL METROLOGY INSTITUTE- BASIC ELECTRONICS

Training Course
Addis Ababa

Laboratory exercise 1

Application of semiconductors and


characteristics of PN junction diode

Participant: Data:

Instructor: Grade:
EXPERIMENT NO. 1.1
Application of semiconductors and characteristics of PN junction diode

OBJECTIVE:-
To obtain V-I characteristics of PN junction diode

INTRODUCTION:-
The semiconductor diode is formed by doping P-type impurity in one side and N-
type of impurity in another side of the semiconductor crystal forming a p-n
junction as shown in the following figure.

Fig. 1 PN junction diode


At the junction initially free charge carriers from both side recombine forming
negatively charged ions in P side of junction(an atom in P-side accept electron
and becomes negatively charged ion) and positively charged ion on n side(an atom
in n-side accepts hole i.e. donates electron and becomes positively charged
ion)region. This region deplete of any type of free
Charge carrier is called as depletion region. Further recombination of free carrier
on both sides is prevented because of the depletion voltage generated due to
charge carriers kept at distance by depletion (acts as a sort of insulation) layer as
shown dotted in the above figure.
APPARATUS AND COMPONENTS
 Junction(power diode)
 Current limiting resistor (1kΩ)
 D.C Power supply
 2 multimeters
 Bread board
 Connecting wires

Task:-
1. Connect the power supply, voltmeter, current meter with the diode as shown in
the figure for forward bias diode. You can use two multimeter (one to measure
current through diode and other to measure voltage across diode)
2. Increase voltage from the power supply from 0V to 20V in step as shown in the
observation table
3. Measure voltage across diode and current through diode. Note down readings
in the observation table.
4 Reverse DC power supply polarity for reverse bias
5. Repeat the above procedure for the different values of supply voltage for
reverse bias
6. Draw VI characteristics for forward bias and reverse bias in one graph Circuit
diagram (forward bias)
Fig .2 forward bias Circuit diagram

Table 1:- Forward bias


Table 2:-Reveres bias
Draw V-I characteristics of PN junction diode

Table 3: V-I characteristics of PN junction diode

Conclusion
-------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------

Questions:-
[1] List important specifications of the diode
[2] What is breakdown voltage? What is the breakdown voltage of diode 1N4001
and 1N4007?
[3] What is the highest forward current in the diode 1N4007 and 1N5002?
[4] List different types of the diode
[5] List applications of the diode?
[6] How to check diode with help of millimeters?
[7] What is the reason for reverse saturation current?
[8] What is the forward voltage drop of silicon diode and germanium diode?

You might also like