Scribd
Upload
33 views

Final Lab Report-Okello

1. The document reports on two lab experiments measuring the performance of an electric motor. It includes member names, objectives, experimental designs, and results. 2. The results show that as the reference voltage decreases, both the rotor speed in RPM and the stator current decrease. The stator current is directly proportional to the reference voltage. 3. Graphs plot the reference voltage against stator current and rotor speed, demonstrating their relationships.

Uploaded by

Gmind
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
33 views

Final Lab Report-Okello

1. The document reports on two lab experiments measuring the performance of an electric motor. It includes member names, objectives, experimental designs, and results. 2. The results show that as the reference voltage decreases, both the rotor speed in RPM and the stator current decrease. The stator current is directly proportional to the reference voltage. 3. Graphs plot the reference voltage against stator current and rotor speed, demonstrating their relationships.

Uploaded by

Gmind
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Members

1. Erick okello j174/0531/2012


2. Isaac Ouma J174/0535/2012
3. Brian Mutui
LAB ONE REPORT
Objective

Lab 1 design
The following is the variation of torque, speed, and back emf respectively during starting for 10
seconds.
LAB TWO
Objective

Lab 2 design

The following graph were obtained from the initial values of 5.0 reference voltage and 4000rpm
frequency.
From the initial simulation, the following values were recorded for the voltage, current and speed
of the motor.
Current= 0.01465
Voltage= 11.9985
Speed = 3999.5
The following table was retrieved while reducing the speed of the motor in steps of 50rpm until
750rpm.
Reference Voltage (V) Stator Current (A*e-3) Rotor Speed (RPM)
5.000 14.71 4000
2.441 7.02 1950
2.376 6.97 1900
2.312 6.78 1850
2.253 6.61 1800
2.187 6.42 1750
2.126 6.23 1700
2.060 6.05 1650
2.000 5.86 1600
1.938 5.68 1550
1.875 5.43 1500
1.811 5.32 1450
1.750 5.15 1400
1.688 4.95 1350
1.623 4.76 1300
1.561 4.58 1250
1.501 4.24 1200
1.436 4.21 1150
1.375 4.02 1100
1.312 3.84 1050
1.250 3.66 1000
1.186 3.49 950
1.125 3.31 900
1.064 3.09 850
1.000 2.87 800
0.938 2.71 750

Reference voltage Vs stator current


6
Reference voltage (V)

0
0 2 4 6 8 10 12 14 16

stator current(*e-3A)
Reference voltage Vs Rotor Speed (RPM)

4500
4000
Reference voltage (V)

3500
3000
2500
2000
1500
1000
500
0
0 2 4 6 8 10 12 14 16

Rotor Speed (RPM)

Discussions
 As the reference voltage reduces, the rotor speed in RPM equally reduces.
 The stator current is directly proportional to the reference voltage. The higher the refence
voltage the higher the stator current ads illustrated. At a reference voltage of 5.0 the
stator current is 14.71e-3 while at 0.938 reference voltage the stator current reduces to
2.71e-3

You might also like