Scribd
Upload
163 views

Afr Data Sheet

The document summarizes the features and specifications of the Precision Regulator 11-4SN filter/regulator combination unit. It offers precise control through a unique valve design and large diaphragm to valve area ratio. It is designed for instrumentation requirements and features a metal bowl that resists corrosive environments. It provides options for pipe threads, body material, filter element size and material, inlet pressure rating, flow rate, regulator type, pressure adjustment, and available pressure and gauge ranges.

Uploaded by

deepak kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
163 views

Afr Data Sheet

The document summarizes the features and specifications of the Precision Regulator 11-4SN filter/regulator combination unit. It offers precise control through a unique valve design and large diaphragm to valve area ratio. It is designed for instrumentation requirements and features a metal bowl that resists corrosive environments. It provides options for pipe threads, body material, filter element size and material, inlet pressure rating, flow rate, regulator type, pressure adjustment, and available pressure and gauge ranges.

Uploaded by

deepak kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRECISION REGULATOR

11-4SN (G ¼, G ½)
FEATURES
 Shavo’s Filter / Regulator combination unit offers extremely precise control.

 Unique valve design and large ratio of diaphragm to valve area affords highly
sensitive performance.

 Specially designed to meet instrumentation requirements.

 Metal bowl on combination unit resists corrosive and chemical atmosphere.

 Also available as Pressure Regulator only.

PARAMETERS SPECIFICATIONS
Pipe Threads Rc 1/4, 1/2 Taper (F) - Standard
BSP / NPT - Optional
Body Material AI. Alloy die-cast
Filter Element Size 5, 25 micron.
Filter Element Material Plastic (Polypropylene) - Standard
Sintered Bronze - Optional
Filter Bowl Material AI. Alloy Metal - Standard
2
Maximum Inlet Pressure 17.5 kg/cm (250 psig)
Maximum Operating
Temperature (ambient) 0
80 C (175 F)
0

Standard nominal flow rate (At supply pressure of 3


8 dm / sec (17 scfm)
10 bar and 1 bar drop in sec. pressure of 6 bar.
Drain Manual - Standard
Regulator Type Relieving - Standard
Non-Relieving - Optional
Pressure Adjustment Hand wheel - Standard
Regulated secondary outlet Spring Range Gauge Range
pressure (spring range) and 1 0.07 to 0.70 0 to 1.0
recommended Pressure gauge 2 0.21 to 2.10 0 to 2.5
2
ranges available in kg/cm ) 3 0.35 to 3.50 0 to 4.0
4 0.50 to 5.00 0 to 7.0
5 0.70 to 7.00 0 to 10.0
Gauge size 52 mm OD
Gauge Port size Rc 1/4
Gauge connection Back
Mounting Bracket Optional

2.598 [66]

9.576 [243]

2.850 [72]
PRECISION FILTER / REGULATOR
11-4SN (G ¼, G ½)

Option Selector
Model Number 1 1 - 4 S N - 2 0 1 M - M 6 K A - N B
Selected

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Position - - - -

1 2 3 4 5 Instrument Filter / Regulator with S.S. Trim.

6 Pipe Size 2 = 1/4"


4 = 1/2"

7 8 Options Relieving Non Relieving


Standard Panel Mounting Type Standard Panel Mounting Type
Knob Slotted Screw Knob Slotted Screw Knob Slotted Type Knob Slotted Screw
No Gauge 00 50 20 70 10 60 30 80
With Gauge 01 51 21 71 11 61 31 81

Bowl M = Metallic (70cc)


9
T = Transparent P.C. (125cc)
L = Long Metallic (125 cc)

M = Manual Drain
10 Drain A = Auto Drain (Available with 125 cc bowl only)

Plastic Element Sint. Bronze Stainless Steel


11 Filter Element 1 = 5 Micron 6 = 5 Micron 5 = 5 Micro
2 = 25 Micron 7 = 25 Micron 9 = 25 micron

A = 0.07 to 0.70 kg / sq.cm


12 Secondary Pressure C = 0.21 to 2.10 kg / sq.cm
Range E = 0.35 to 3.50 kg / sq.cm
F = 0.50 to 5.00 kg / sq.cm
K = 0.70 to 7.00 kg / sq.cm O = 0.01 to 0.14 kg/sq.cm.

Main Ports Gauge Ports


A NPT BSPT
13 Port B BSPT BSPT
Thread G BSP BSPT
N NPT NPT
J PT JAPAN PT JAPAN

14 Elastomer N = Nitrile
E = EPDM
Material
V = Viton

N = No Mounting Bracket
15 Mounting B = Standard Mounting Bracket
P = 2" Pipe Mounting Bracket
S = Customer's spl. Mounting Bracket

You might also like