Scribd
Upload
261 views

Nokia Command List

This document lists Nokia commands that can be used to monitor alarms, check equipment status, lock and unlock sites, sectors, and TRXs, reset equipment, and perform other maintenance and troubleshooting tasks on a mobile network. Some key commands include ZAHO to display active alarms, ZEOL to view alarms on a particular site, ZEFS to lock and unlock sites, ZEQS to lock and unlock sectors, and ZERS to lock and unlock TRXs. The commands provide ways to investigate issues, reset equipment, and check status and performance on the network.

Uploaded by

Satyendra Singh Tomar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
261 views

Nokia Command List

This document lists Nokia commands that can be used to monitor alarms, check equipment status, lock and unlock sites, sectors, and TRXs, reset equipment, and perform other maintenance and troubleshooting tasks on a mobile network. Some key commands include ZAHO to display active alarms, ZEOL to view alarms on a particular site, ZEFS to lock and unlock sites, ZEQS to lock and unlock sectors, and ZERS to lock and unlock TRXs. The commands provide ways to investigate issues, reset equipment, and check status and performance on the network.

Uploaded by

Satyendra Singh Tomar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

jjcvcs - Nokia Command List

Nokia Command List

NOKIA COMMANDS:< xml="true" ns="urn:schemas-microsoft-com:office:office" prefix="o"


namespace="">

Hot Keys:
Ctrl + B repeats last and previous commands on the MML
Ctrl + Y interrupts current command being typed or run

Alarm monitoring:
ZAHO; displays current active alarms in actual MSC and BSC only
ZEOL:#; displays active alarms on BCF (BCF = Site Manager or CF)
ZEEI:BCF=#; displays the operational state of the site
ZEOH:date,time:BCF=#; displays alarm history for site for the date and time listed
ZAHO:ET,#; displays current alarms for that ET (PCM)
ZAHP:ET,#; displays alarm history for that ET
ZEEL:BL; displays locked Sites, Sectors and TRXs on BSC

Checking External Alarms:


ZEFO:BCF#:iop;

Investigating Clear Codes:


ZTUT:CLR; displays current clear codes on the MSC
ZTUL:CLR; displays latest history of clear codes

Canceling Bogus alarms on a Site: (Perform both commands)


ZEOR:#:alarm #; cancels alarm on site
ZEFR:#:OMU; resets the OMU (Operations and Maintenance Unit)

Canceling Bogus alarms on a BSC:


ZACC:####; cancels the alarm using the consecutive # in which it came in
ZACA:####; cancels the alarm using the alarm identifier #

Locking and unlocking a Site:


ZEFS:bcf #:L; locks entire Site without Forced Handover
ZEFS:bcf #:U; unlocks entire Site

Locking and unlocking Sectors:


ZEQS:BTS=#:L; locks entire sector down without Forced Handover
ZEQS:BTS=#:L:FHO,#; shuts down entire sector with Forced Handover

http://jjcvcs.googlepages.com/nokiacommandlist (1 of 4)2/6/2009 4:13:07 PM


jjcvcs - Nokia Command List

ZEQS:BTS=#:U; unlocks entire sector

Locking and unlocking TRXs:


ZERS:BTS=#,TRX=#:L; locks TRX down without Forced Handover
ZERS:BTS=#,TRX=#:L:FHO,#; shuts down TRX with Forced Handover
ZERS: BTS=#,TRX=#:U; unlocks TRX

Resetting the Site or OMU:


ZEFR:#:SITE; restarts SITE
ZEFR:#:OMU; restarts OMU

Bouncing Lap D’s on a Site:


ZDTI:::PCM=#; displays Lap D channels for entire site
ZDTC:lap d #:BL; blocks desired Lap D channel
ZDTC:lap d #:WO; places Lap D channel in working state

Error Checking on an ET (PCM):


ZYMO:ET,#; checks error counter for specific ET
ZYEU:ET,#:SLIDL=5; resets error counter for specific ET

Querying the # of calls on a site:


ZERO:BTS=#; displays all calls on desired sector
ZERO:BTS=#,TRX=#; displays all calls on desired TRX only

Sparing or Rolling a BCSU:


ZUSI:BCSU; displays what BCSU the SP was previously on
ZFWO:BCSU=0&&8; displays what BCSU the BL condition is on
ZUSC:BCSU,#:SP; spares the BCSU with the BL condition on it
Y for Yes executes the command

Statusing Timeslots:
ZEEL::BCF=#; Status the timeslots on a BCF

Status ET alarms on a BSC


ZAHP:ET,:::; Show all ET's that are in alarm

Taking an ET out of < xml="true" ns="urn:schemas-microsoft-com:office:smarttags" prefix="st1"


namespace="">Seperated State
ZUSC:ET,#:SE; Will place the ET in a Separated - No Hardware state
(SE-NH)

Status session for User ID and commands:


ZIGO: Displays commands run for BSC on specific date and time.

Reloading software on a site:


ZEWV:BCF #:BU; Reloads the software on a BCF

http://jjcvcs.googlepages.com/nokiacommandlist (2 of 4)2/6/2009 4:13:07 PM


jjcvcs - Nokia Command List

Checking OMC alarms:


Open a terminal and telnet to the IP
Log in
Run the following command: df –k

Taking an ET out of BL state:


ZUSC:ET,#:
WORKING
BLOCKED
TEST
SEPERATED
SEPERATED-NO HARDWARE
Go back up the tree to get it back into Working

Rolling the BCCH on a Sector:


ZDTI:::PCM=#; Find out what TSL the radio is on that you want the BCCH on
ZDTC:lapd:BL; Block the TSL on the radio that the BCCH is going to
ZDTC:lapd:AL; Allow activation of the TSL that the BCCH is going to
ZDTC:lapd:WO; Brings TSL to a working state that the BCCH is going to
ZDTI:::PCM=#; Find out what TSL the radio that HAD the BCCH is on
ZDTC:lapd:AD; Deny Activation of the TSL that HAD the BCCH on it
ZDTC:lapd:BL; Block the TSL that the BCCH was on
ZDTC:lapd:WO; Brings the TSL to a working state

GPRS Command
zeqv:bts=xxx:gena=n/y;

CEll Barred Command:


ZEQO:BTS=#:CEL;

Measurment Data Command


ZIFO:OMU:MEASUR::;

Who locked it:


ZIGO:YYYY-MM-DD,HR-MN::CMD=:FORMAT=:;

RUN DIAGNOSTICS TEST< xml="true" ns="urn:schemas-microsoft-com:office:office" prefix


namespace="">
Zqus:bcf=xx;
Then type TOP and hit enter
9 for testing and hit enter
7 for run test and hit enter
Once you get printout (No Diagnostic Faults)
Type Top and hit enter
1 for fault display and hit enter

http://jjcvcs.googlepages.com/nokiacommandlist (3 of 4)2/6/2009 4:13:07 PM


jjcvcs - Nokia Command List

Should get True (OK)


Exit and you will be back out of TRUE card.

http://jjcvcs.googlepages.com/nokiacommandlist (4 of 4)2/6/2009 4:13:07 PM

You might also like