Scribd
Upload
57 views2 pages

Two Phase Flow - Beggs & Brill Method: Line Number P-10001 Description Feed Pipe Date 30-Aug-15 by Cheguide

This document contains input parameters and results from calculating two-phase flow using the Beggs & Brill method in a uphill pipe. The parameters include pipe geometry, gas properties of temperature, pressure and flow rate, liquid properties of flow rate, density and viscosity, and surface tension. The results include an intermittent flow pattern, holdup volume fraction, inclination correction factor, mixture properties, pressure drops due to head and friction, and the total and corrected pressure drops per unit length.

Uploaded by

wael
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
57 views2 pages

Two Phase Flow - Beggs & Brill Method: Line Number P-10001 Description Feed Pipe Date 30-Aug-15 by Cheguide

This document contains input parameters and results from calculating two-phase flow using the Beggs & Brill method in a uphill pipe. The parameters include pipe geometry, gas properties of temperature, pressure and flow rate, liquid properties of flow rate, density and viscosity, and surface tension. The results include an intermittent flow pattern, holdup volume fraction, inclination correction factor, mixture properties, pressure drops due to head and friction, and the total and corrected pressure drops per unit length.

Uploaded by

wael
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Two Phase Flow - Beggs & Brill Method

CheGuide.com Line Number P-10001


Chemical Engineer's Guide Description Feed Pipe
Date 30-Aug-15
User Input By CheGuide

Pipe Data Metric English


Inner Diameter 50.67 mm 1.995 inch
Pipe Roughness 0.00180 mm 0.000071 inch
Pipe Length 100.00 m 328.084 foot
Flow Direction uphill
Pipe Inclination angle 90 ° with horizontal

Gas
Flowing Temperature 32.2 Deg C 90.00 Deg F
Inlet Pressure 119 bar 1719.7 psi
Volumetric flowrate 9.0 m3/h 5.31 ft3/min
@ Standard Conditions 944.9 Nm3/h @ 1 atm, 0°C 587.6 SCFM @ 14.7 PSI, 60°F
Density 141.3 Kg/m 3
8.823 lb/ft3
Viscosity 0.020 cP 1.34E-05 lb/ft.s

Liquid
Volumetric flowrate 4.75 m3/h 20.916 US gpm
Density 613.8 Kg/m 3
38.320 lb/ft3
Viscosity 0.500 cP 3.36E-04 lb/ft.s
gas/liquid Surface tension 28.0 dyne/cm

Results
Flow pattern map Intermittent
Pressure drop due to head
Holdup volume fraction, EL(0) 0.462 0.462
Inclination correction factor, β 1.055 1.055
Inclined holdup v.f, EL(θ) 0.487 0.487
Mixture density 371.61 Kg/m3 23.20 lb/ft3
DP due to Head 3.64 bar 52.85 psi
Pressure drop due to friction
Friction factor ratio 1.445 1.445
No Slip Reynold's Number 157713 157713
No Slip friction factor, fNS 0.0042 Fanning 0.0042 Fanning
Two phase firction factor, fTP 0.0060 Fanning 0.0060 Fanning
DP due to friction 0.26 bar 3.77 psi
Total pressure drop 3.90 bar 56.62 psi
Correction due to acceleration 0.989 0.989
Corrected Total Pressure drop 3.95 bar 57.23 psi
Pressure drop / Length 3.95 bar / 100 mt 17.44 psi / 100 ft

You might also like