Scribd
Upload
150 views

518C

The document describes medium pressure hose 518C that is electrically non-conductive and has high abrasion resistance. It can be used for medium pressure service in general industrial and mobile hydraulic applications where non-conductive lines are required, such as working platforms for high-voltage line repair and aluminum melting furnaces. The hose has a polyester or polyamide core tube reinforced with braided synthetic fiber and a polyurethane cover. It is rated to operate from -40°C to 100°C and comes in various sizes with minimum bend radii and burst pressures specified. Reusable fittings are available upon request.

Uploaded by

Jas Sum
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
150 views

518C

The document describes medium pressure hose 518C that is electrically non-conductive and has high abrasion resistance. It can be used for medium pressure service in general industrial and mobile hydraulic applications where non-conductive lines are required, such as working platforms for high-voltage line repair and aluminum melting furnaces. The hose has a polyester or polyamide core tube reinforced with braided synthetic fiber and a polyurethane cover. It is rated to operate from -40°C to 100°C and comes in various sizes with minimum bend radii and burst pressures specified. Reusable fittings are available upon request.

Uploaded by

Jas Sum
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

E

Hose and Fittings for Hydraulic and Industrial Applications


518C

518C – Medium pressure hose


Electrically non-conductive –
Performance exceeds SAE 100 R7 /
ISO 3949 Type R7 / DIN EN 855 Type R7
MAIN FEATURES • Electrically non-conductive
• High abrasion resistance
• Small bend radii
• Low weight

APPLICATIONS Medium pressure service for general industrial and mobile hydraulic appli-
cations, when electrically non-conductive lines are required, e.g.:
• Working platforms for high-voltage line repair

Hydraulic / Industrial
• Aluminium melting furnaces

CONSTRUCTION Core tube : Polyester elastomer, except -2: polyamide


Pressure reinforcement : One braided layer of high tensile synthetic fibre

Cover : Polyurethane
Colour : orange
TEMPERATURE RANGE -40°C up to +100°C for petroleum, max. 57°C for synthetic hydraulic fluids
and water-based hydraulic fluids.
Max. working Min. burst Min. bend
pressure pressure radius Weight
Part No. DN size mm inch mm MPa / psi MPa / psi mm kg/m Fittings

518C-2 3 -02 3.2 1/8 8.4 17.5 2,500 69.0 10,000 13 0.05 56
518C-3 5 -03 4.8 3/16 10.7 22.5 3,250 90.0 13,000 19 0.07 56
518C-4 6 -04 6.3 1/4 11.7 20.7 3,000 83.0 12,000 38 0.08 56
518C-5 8 -05 7.9 5/16 14.3 17.5 2,500 69.0 10,000 44 0.11 56
518C-6 10 -06 9.5 3/8 16.0 15.5 2,250 62.0 9,000 51 0.14 56
518C-8 12 -08 12.7 1/2 20.4 15.5 2,250 62.0 9,000 76 0.22 56
518C-10 16 -10 15.9 5/8 24.9 10.5 1,500 42.0 6,000 102 0.30 56
518C-12 20 -12 19.1 3/4 27.4 8.5 1,250 34.5 5,000 152 0.31 56
518C-16 25 -16 25.4 1 33.5 7.0 1,000 27.5 4,000 203 0.40 56

NOTES • Reusable fittings available on request.


• Electrically non-conductive acc. to SAE J517 (less than 50 µA leakage under 250,000 Volts per
meter).

E-13 Catalogue 4460-UK

You might also like