COMMANDS TO BE PERFORMED ON OLT:

-------------------------------------------------------------------------------------------------------------------------------------

telnet 192.168.222.37 2023 [Telnet to the respective node.]

login: guest

Password: iltwat

NSG_GPON_BLR> su

Password: swtn100tj

bash-4.3# telnet 127.1.1.x (Telnet to the GPON card. Here, x is the slot number where GPON card is
inserted.)

login:guest

Password:iltwat

-bash-4.3$ su

Password: swtn100tj

Commands: (To check service level performance)

 /opt/bcm68620/bcm_user_appl
 api/st clear=yes object=gpon_gem_port pon_ni=3 gem_port_id=289 (pon_ni=8-pon-port)

→ [This command is used to check Rx and Tx packets as:

Gem Port:

Rx - ONT to OLT

Tx - OLT to ONT]

(Note: gem port id can be found from “connections” on UI of the node.)

 api/st clear=yes object=nni pon_ni=4 (pon_ni=8-pon port)

→ [This command is used to check Rx and Tx packets as:

Nni Port:

Rx - OLT to ONT

Tx - ONT to OLT
----------------------------------------------------------------------------------------------------------------------------------------

To collect openConlog001 log from the OLT card:

Command:

 ncftpput -uroot -pswtn100tj 127.1.254.1 /tmp /etc/tejas/log/openConlog001

→ [This command is used to copy the openConlog001 to the tmp folder of Master card. Then, the file
can be downloaded to the local PC using 3cDaemon.]

------------------------------------------------------------------------------------------------------------------------------------------

Reading OLT connections from backend:

Command:

 telnet 0 2024
 DumpOnuVPorttable()

→ [This command is used to read OLT connections made on OLT from backend when it doesn’t reflect
on UI.]

------------------------------------------------------------------------------------------------------------------------------------------

Command to see whether the ONT is activated or deactivated:

Command:

 api/get object=gpon_ni pon_ni=4

Output:

[-- API Start: bcmolt_cfg_get --]

[-- API Message Data --]

object: gpon_ni - GPON network interface

get cfg response: OK

key:

pon_ni=4

data:

pon_status.state=active_working

pon_status.los_status=off
available_bandwidth.cbr_bw=69600000

available_bandwidth.total_bw=152696000

available_bandwidth.next_onu_total_bw=152608000

number_of_active_onus=1

number_of_active_standby_onus=0

prbs_status.lock_state=unlocked

prbs_status.error_counts=0

pon_distance.max_log_distance=45

pon_distance.max_diff_reach=45

ranging_window_size=68649

preassigned_equalization_delay=0

eqd_cycles_number=5

power_level.pls_maximum_allocation_size=120

power_level.mode=2

ds_fec_mode=enable

drift_control.drift_interval=1000

drift_control.drift_limit=4

drift_control.transmission_control_limit=8

ds_ber_reporting_interval=5000

los_alarm_threshold=4

los_initial_value=off

onu_alarms_thresholds.losi=4

onu_alarms_thresholds.lofi=4

onu_alarms_thresholds.loami=3

ber_monitor.us_ber_interval=5000
ber_monitor.sf_threshold=5

ber_monitor.sd_threshold=9

ploam_ack_timeout=2000

onu_activation.key_exchange=disable

onu_activation.password_authentication=disable

onu_activation.fail_due_to_password_authentication_failure=disable

sn_acquisition.interval=30000

sn_acquisition.control=enable

sn_acquisition.onu_post_discovery_mode=none

key_exchange.interval=10000

key_exchange.control=disable

key_exchange.mode=normal

key_exchange.encrypted_ports_only=enable

protection_switching.timeout=100

protection_switching.gpio_pin=unconfigured

protection_switching.options=-

cbr_rt_allocation_profile.ma_7=64

cbr_rt_allocation_profile.ma_3=256

cbr_rt_allocation_profile.ma_1=512

cbr_nrt_allocation_profile.arr=4096,8192

dba.sr_reporting_block_size=16

dba.dba_mode=normal

power_management.ilowpower=1600

power_management.iaware=160

power_management.itransinit=80
 power_management.itxinit=40

power_management.irxoff=1600

power_management.low_power_clobi=8

rogue_onu_detection_process.control=disable

rogue_onu_detection_process.detection_algorithm.algorithm_type=early_rogue_de

tection

rogue_onu_detection_process.detection_algorithm.u.early_rogue_detection.measu

re=silent_window

rogue_onu_detection_process.detection_algorithm.u.early_rogue_detection.inter

va=10000

rogue_onu_detection_process.detection_algorithm.u.early_rogue_detection.secon

d_=no

rogue_onu_detection_process.detection_algorithm.u.early_rogue_detection.alloc

_t=all

periodic_standby_pon_monitoring.interval=5000

periodic_standby_pon_monitoring.control=disable

prbs_checker.polynom=prbs_7

prbs_checker.mode=self_sync

prbs_checker.data_invert=no

prbs_checker.control=disable

prbs_generator.polynom=prbs_7

prbs_generator.error_insert=no

prbs_generator.invert=no

prbs_generator.control=disable

min_data_alloc_id=256
 automatic_onu_deactivation.los=yes

automatic_onu_deactivation.onu_alarms=yes

automatic_onu_deactivation.tiwi=yes

automatic_onu_deactivation.ack_timeout=yes

automatic_onu_deactivation.sfi=yes

automatic_onu_deactivation.loki=yes

us_bandwidth_limit=155520000

all_onus.onu_id=0,1 (Count of ONT starts from 0)

all_onus.state=active,inactive

all_mcast_gem_ports.gem_id=-

all_mcast_gem_ports.state=-

debug.reduced_min_access_size=no

debug.increase_available_cbr_bw=no

onu_upgrade_params.response_timeout_ms=1000

onu_upgrade_params.max_retry_count=23

onu_upgrade_params.omci_format=extended

onu_upgrade_params.window_size=32

onu_upgrade_params.activate_commit=no

onu_upgrade_params.delay_for_commit_ms=40000

onu_upgrade_params.max_activation_attempts=23

ps_c_wait_before_deactivation_timeout=1000

[-- API Complete: 0 (OK) --]

------------------------------------------------------------------------------------------------------------------------------------------
COMMANDS TO BE PERFORMED ON ONT:
telnet 192.168.1.1

user:admin

password:admin

Command:

> laser power --rxread →[This command is used to read the Rx Power received from OLT to ONT ]

Output:

Rx Laser Power = 57.799999 uW

= -12.380722 dBm

Command:

> laser power --txread →[This command is used to read the Tx Power transmitted from ONT to OLT]

Output:

Tx Laser Power = 1662.500000 uW

= 2.207617 dBm