Weld Procedure Specification All About Metal Pty Ltd.

93 Dunheved Circuit
A.B.N 42 606 419 425 P.O. Box 201
St Marys NSW 1790
WPS 108 Ph: (02) 9623 7652
Steel Fabricators
Based On: WPQR 108 Fax: (02) 9623 5804
& Sheetmetal Workers

Joint Preparation:
Root Gap: 1.5 mm max.
Root Face: N/A
Weldability
Grade Thickness Form: PWHT No Prep angle: 90 Deg
Group No:
Qualified Mat. 1 Spec: AS / NZ 1594 - HA250 3 6.0 mm Plate Heating Rate: N/A
Qualified Mat. 2 Spec: AS / NZ 1594 - HA250 3 6.0 mm Plate Hold Temp: N/A 45 to 135 Deg.

Hold Time: N/A

Cooling Rate: N/A
Qualified Material Type Australian standard mild steel plate and sections 1.5 mm Max.

Qualified Weld Type All multi run fillet welds

Qualified Welding Position: Downhand positions only - 1 F & 2 F NDT Requirements
Qualified Fillet Size: 10 mm minimum leg length. Tests: %
Qualified Material Thickness: Unlimited Visual scanning: 100 %
Edge Prep Method: As cut, machined or ground Visual inspection: To Client Spec. Pass Location & Sequence:
Temp Check Method: Temp sticks or Digital Thermometer Radiography N/A
Heating Method: LPG / Oxy Acetylene if required UT N/A
Preheat Temp: Ambient but greater than 20 Deg C MPI To Client Spec.
Interpass Cleaning: As welded, grind or wire brush DP N/A
Max.Int/pass Temp: 250 Deg C Maximum Hardness N/A 9 mm Min.

Gouge Method: N/A Other tests N/A Run 3

Gouge Check Method: N/A Run 2

Run 1
Weld Finish: As Welded 9 mm Min
Qualified To: AS / NZS 1554.1 2004

Welding Details Electrode/Wire Equipment Electrical Preaheat / Inpass Weld Travel Arc Energy
Run Welding Welding Tungsten Gas Electrode AMPS Volts Deg C Speed mm / Min Input kJ / mm Shielding Gas
No. Process Technique Classification Dia. mm Dia/Type Nozzle Dia. Polarity Min. Max Min. Max Min. Max Min. Max Min. Max Type Flow Rate
1.0 GMAW Stringer Bead AWS 5.18 ER 70 S6 0.9 N/A 20.0 DC Pos. 207 253 28 32 20 222 510 690 0.50 0.96 Corgon 5/2 16 to 25 L/min
2.0 GMAW Stringer Bead AWS 5.18 ER 70 S6 0.9 N/A 20.0 DC Pos. 207 253 28 32 20 240 588 796 0.44 0.83 Corgon 5/2 16 to 25 L/min
3.0 GMAW Stringer Bead AWS 5.18 ER 70 S6 0.9 N/A 20.0 DC Pos. 207 253 28 32 20 240 528 714 0.49 0.92 Corgon 5/2 16 to 25 L/min
Equilevant classification AS/NZS 2717.1 ES6- GC-W503AH Electrical stick out (CTWD) = 16 mm 24 mm
Equilevant classification AS/NZS 14341 B-G49A 3UM/C S6