Scribd
Upload
194 views1 page

Bornemann

The document is a quotation for a screw pump. It summarizes key details about the pump's installation, rotation, nameplate, accessories, drive system, painting, mill certifications and testing, documentation, weights, and packing in 14 sections. The pump will be installed horizontally indoors, rotate clockwise, have an English/aluminum nameplate on the left drive shaft side, and be driven by a 132-160 kW 3-phase motor running at 990 rpm. It will undergo hydrostatic pressure and performance testing according to applicable standards.

Uploaded by

Patricia J Ángeles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
194 views1 page

Bornemann

The document is a quotation for a screw pump. It summarizes key details about the pump's installation, rotation, nameplate, accessories, drive system, painting, mill certifications and testing, documentation, weights, and packing in 14 sections. The pump will be installed horizontally indoors, rotate clockwise, have an English/aluminum nameplate on the left drive shaft side, and be driven by a 132-160 kW 3-phase motor running at 990 rpm. It will undergo hydrostatic pressure and performance testing according to applicable standards.

Uploaded by

Patricia J Ángeles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Screw Pump quotation no. / pos.

NI 21300468 / 2,0
Pumps and Systems
www.bornemann.com
HC 232 - 80/2 / N page: 2
7.0 Installation / Rotation / Name Plate

:::: :::: :::: ::::

:::: :::: ::::


1 installation horizontal 5 rotation cw
2 location indoor 6 pos. of drive shaft left
3 area classification - 7/8 name plate English / aluminium
4 remarks
8.0 Accessories
:::: :::: :::: :::: :::: :::: :::: ::::

:::: :::: :::: :::: :::: :::: ::::


1 base plate - 9 maker coupling -
2 executioncode 10 coupling type -
3 option base plate 1 11 coupling guard -
4 option base plate 2 12 cover for drive -
5 drip pan - 13 instruments/options
6 mounting option 1 14 spare parts
7 mounting option 2 15 electrical wiring
8 remarks
9.0 Drive
:::: :::: :::: :::: :::: :::: :::: :::: ::::

1 drive system 3-phase-motor 11 frequency (Hz) :


type protection :

:::: :::: :::: :::: :::: ::::


2 12
3 manufacturer 13 explosion proof
4/5 size/ mounting form 315L / B3 14 insulation class
6 start not specified 15 certificate
7 power (kW) 132 / 160 16 supplied by customer
8 speed (1/min-) 990 17 assembly customer
9 voltage (V) 18 part no. drive
10 remarks
10.0 Painting / Conservation
:::: :::: :::: ::::

:::: :::: ::::


1 painting blue, RAL 5010 (standard) 5 intermediate coat -
2 surface preparation acc. to QSA 09032 (standard) 6 final coat acc. to QSA 09032 (standard)
3 primer coat acc. to QSA 09032 (standard) 7 preservation acc. to QSA 09011 standard
4 remarks
11.0 Mill Certs / Testing
:::: :::: :::: ::::

:::: :::: ::::

1 casing - 11 liner -
2 shafts - 12 bearing housing -
3 screws - 13 intermediate flange -
4 additional parts
Testing yes/no according to by pressure test medium
:::: :::: :::: :::: :::: ::::

5 hydrostat. press. test yes EN 10204-2.2 BORNEMANN 1,5 x pD water


6 performance test yes VDMA 24284 BORNEMANN water
7 NPSH-test no
8 noise level test no
9 vibration test no
10 remarks
12.0 Documentation
:::: :::: :::: :::: ::::

:::: :::: ::::

1 language English 6 operation manual 1-fold


2 hydrostat. press. test 1-fold 7 mill certs -
3 performance test 1-fold 8 dimensional drawing 1-fold
4 documents to
5 remarks
13.0 Weights / Packing
:::: ::::

:::: ::::

:::: ::::

1 pump kg 3 accessories kg 5 total gross kg


2 base plate kg 4 total net kg 6 packing packing for truck transport
14.0 Remarks
1

issued: Zank / 04.04.2013 checked: Horn / 04.04.2013 revised: rev.: 0

You might also like