Scribd
Upload
57 views

131St Series Proficiency Testing Program For SMR Testing: Set 1 Set 2

This document outlines a proficiency testing program for standard Malaysian rubber (SMR) conducted by the Malaysian Rubber Board. The program consists of two sample sets tested over two days for various material properties including dirt, plasticity retention index, volatile matter, nitrogen, ash, colour, Mooney viscosity, Wallace ASHT, Mooney ASHT, and rheometric properties. The samples will be blended on September 3rd and 4th and tested on September 4th and 5th. Laboratories are instructed to follow standard test methods and to note the labeling convention for the test samples.

Uploaded by

sabbysamura
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
57 views

131St Series Proficiency Testing Program For SMR Testing: Set 1 Set 2

This document outlines a proficiency testing program for standard Malaysian rubber (SMR) conducted by the Malaysian Rubber Board. The program consists of two sample sets tested over two days for various material properties including dirt, plasticity retention index, volatile matter, nitrogen, ash, colour, Mooney viscosity, Wallace ASHT, Mooney ASHT, and rheometric properties. The samples will be blended on September 3rd and 4th and tested on September 4th and 5th. Laboratories are instructed to follow standard test methods and to note the labeling convention for the test samples.

Uploaded by

sabbysamura
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 354

BKPT/RQAU/PTSMR/LGM 001-18 Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/SD 001-18 Page 1 Of 8

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/MC 001-18 Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/LKKRAI 001-18 Page 1 Of 8

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/HKB 001-18 Page 1 Of 7

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/HH 001-18 Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/LIGS 001-18 Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/LKK 001-18 Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/PKBI 001-18 Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/KTT 001-18 Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/STG 001-18 Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/TQCC 001-18 Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/SH 001-18 Page 1 Of 7

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/EUROMA 001-18 Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/CL 001-18 Page 1 Of 7

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/LBM 001-18 Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/LB 001-18 Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/LL / 001-18 Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/MTKEDAH 001-18 Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/FPB 001-18 Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/KTBP 001-18 Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/CONTINENTAL 001-18 Page 1 Of 4

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT - - ; - - - - ; - -
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/TARRC 001-18 Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/GOODYEAR 001-16
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT - - ; - - - - ; - -
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/RQAU/PTSMR/ENM 001-18 Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Blending Date : 3.9.2018 ( 9.30 - 10.30 am) 4.9.2018 ( 9.30 - 10.30 am)
Testing Date: 4.9.2018 5.9.2018

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Research Officer
Regulatory and Quality Assurance Unit (RQAU) Regulatory and Quality Assurance Unit (RQAU)
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/LGM 002-17
Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt - - ; - - - - ; - -
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/SD 002-17
Page 1 Of 8

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/MC 002-17
Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/LKKRAI 002-17
Page 1 Of 8

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/HKB 002-17
Page 1 Of 7

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/HH 002-17
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2015 06.12.2015

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/LIGS 002-17
Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/LKK 002-17
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/PKBI 002-17
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/KTT 002-17
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/STG 002-17
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/TQCC 002-17
Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/SH 002-17
Page 1 Of 7

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/MTKL 002-17
Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/CL 002-17
Page 1 Of 7

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/LBM 002-17
Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/LB 002-17
Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/LL 002-17
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/MTKEDAH 002-17
Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/FPB 002-17
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/KTBP 002-17
Page 1 Of 6

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/CONTINENTAL 002-17
Page 1 Of 4

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour - - ; - - - - ; - -
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT - - ; - - - - ; - -
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/TARRC 002-17
Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/GOODYEAR 002-17
Page 1 Of 5

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT - - ; - - - - ; - -
Mooney ASHT - - ; - - - - ; - -
Rheometric - - ; - - - - ; - -
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
BKPT/A&C/PTSMR/NM 002-17
Page 1 Of 9

131st SERIES PROFICIENCY TESTING PROGRAM


FOR SMR TESTING

TEST METHOD SET 1 SET 2


Dirt DAA 1-5 ; DBA 1-5 DAB 1-5 ; DBB 1-5
Plasticity Retention Index PAA 1-5 ; PBA 1-5 PAB 1-5 ; PBB 1-5
Volatile Matter VMAA 1-3 ; VMBA 1-3 VMAB 1-3 ; VMBB 1-3
Nitrogen NAA 1-3 ; NBA 1-3 NAB 1-3 ; NBB 1-3
Ash AAA 1-3 ; ABA 1-3 AAB 1-3 ; ABB 1-3
Colour CAA 1-3 ; CBA 1-3 CAB 1-3 ; CBB 1-3
Mooney Viscosity MVAA 1-3 ; MVBA 1-3 MVAB 1-3 ; MVBB 1-3
Wallace ASHT WAA 1-3 ; WBA 1-3 WAB 1-3 ; WBB 1-3
Mooney ASHT MAA 1-3 ; MBA 1-3 MAB 1-3 ; MBB 1-3
Rheometric RAA 1-3 ; RBA 1-3 RAB 1-3 ; RBB 1-3
Testing Date: 05.12.2017 06.12.2017

Remarks:
Follow the RRIM Test Methods for Standard Malaysian Rubbers, SMR Bulletin No. 7

Please take note on the indicator as the example below :


Example 1 : DAA Example 2 : MVBB
D - Represents Parameter MV - Represents Parameter
A - Represents type of material B - Represents type of material
A - Represents day, A ( Day 1 ) , B ( Day 2 ) B - Represents day, A ( Day 1 ) , B ( Day 2 )

Prepared By : Approved By :

MUHAMAD AIMAN BIN AHMAD TAJUDIN NUR SALWANIE MOHAMED RESALI


Assistant Engineer Head of Programme,
Accreditation and Certification Program Accreditation and Certification Program
Quality and Technical Service Division Quality and Technical Service Division
Malaysian Rubber Board Malaysian Rubber Board
LEMBAGA GETAH MALAYSIA PAGE 2 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : GLOBAL TESTING ANG CONSULTANCY FOR RUBBER, LEMBAGA GETAH MALAYSIA

DATE OF TESTING : DAY 1 : 04.12.2017 DAY 2 : 05.12.2017

02 INITIAL PLASTICITY, Po 01 DIRT, % wt.


(1 decimal place) (3 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB DAA DAB DBA DBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : GLOBAL TESTING ANG CONSULTANCY FOR RUBBER, LEMBAGA GETAH MALAYSIA

DATE OF TESTING : DAY 1 : 04.12.2017 DAY 2 : 05.12.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : GLOBAL TESTING ANG CONSULTANCY FOR RUBBER, LEMBAGA GETAH MALAYSIA

DATE OF TESTING : DAY 1 : 04.12.2017 DAY 2 : 05.12.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : GLOBAL TESTING ANG CONSULTANCY FOR RUBBER, LEMBAGA GETAH MALAYSIA

DATE OF TESTING : DAY 1 : 04.12.2017 DAY 2 : 05.12.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : GLOBAL TESTING ANG CONSULTANCY FOR RUBBER, LEMBAGA GETAH MALAYSIA

DATE OF TESTING : DAY 1 : 04.12.2017 DAY 2 : 05.12.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : GLOBAL TESTING ANG CONSULTANCY FOR RUBBER, LEMBAGA GETAH MALAYSIA

DATE OF TESTING : DAY 1 : 04.12.2017 DAY 2 : 05.12.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 8 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : GLOBAL TESTING ANG CONSULTANCY FOR RUBBER, LEMBAGA GETAH MALAYSIA

DATE OF TESTING : DAY 1 : 04.12.2017 DAY 2 : 05.12.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 test portions

Round Robin Section


RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 9 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : GLOBAL TESTING ANG CONSULTANCY FOR RUBBER, LEMBAGA GETAH MALAYSIA

DATE OF TESTING : DAY 1 : 04.12.2017 DAY 2 : 05.12.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


PAGE 2 OF 9

ALAYSIA

MATERIAL B
DAY 2
DBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 9

ALAYSIA

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 9

ALAYSIA

Round Robin Section


PAGE 5 OF 9

ALAYSIA

Round Robin Section


PAGE 6 OF 9

ALAYSIA

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 7 OF 9

ALAYSIA

MATERIAL B
DAY 2
MBB

Round Robin Section


PAGE 8 OF 9

ALAYSIA

(in.lb)

MATERIAL B
DAY 2
RBB

Round Robin Section


PAGE 9 OF 9

ALAYSIA

MATERIAL B
DAY 2
RBB

MATERIAL B
DAY 2
RBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 8

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SIME DARBY RESEARCH CENTRE SDN.BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)

MATERIAL A MATERIAL B MATERIAL A MATERIAL B


SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of teSTing
Type of oven
Initial temperature, °C
Temperature on closure of oven door, °C
Time to reach initial temperature after closure, °C min. and sec.
Temperature at STe end of ageing period, °C
Date (PlaSTimeter laST calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 8

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SIME DARBY RESEARCH CENTRE SDN.BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)

MATERIAL A MATERIAL B MATERIAL A MATERIAL B


SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 8

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SIME DARBY RESEARCH CENTRE SDN.BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)

MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 8

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SIME DARBY RESEARCH CENTRE SDN.BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)

MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 8

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SIME DARBY RESEARCH CENTRE SDN.BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)

MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 8

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SIME DARBY RESEARCH CENTRE SDN.BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)

MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 teST portions

RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 8 OF 8

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SIME DARBY RESEARCH CENTRE SDN.BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)

MATERIAL A MATERIAL B MATERIAL A MATERIAL B


SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MECH CHEM LABORATORY SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of teSTing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Time to reach initial temperature after closure, °C min. and sec.

Temperature at STe end of ageing period, °C

Date (PlaSTimeter laST calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MECH CHEM LABORATORY SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MECH CHEM LABORATORY SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MECH CHEM LABORATORY SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MECH CHEM LABORATORY SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MECH CHEM LABORATORY SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 8 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MECH CHEM LABORATORY SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 teST portions

RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 9 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MECH CHEM LABORATORY SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) LTD - KUALA KRAI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of teSTing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at STe end of ageing period, °C

Date (PlaSTimeter laST calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) LTD - KUALA KRAI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) LTD - KUALA KRAI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) LTD - KUALA KRAI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 8

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) LTD - KUALA KRAI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) LTD - KUALA KRAI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 test portions

Round Robin Section


RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) LTD - KUALA KRAI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


PAGE 2 OF 7

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 7

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 7

Round Robin Section


PAGE 5 OF 7

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 6 OF 8

MATERIAL B
DAY 2
MBB

Round Robin Section


PAGE 6 OF 7

(in.lb)

MATERIAL B
DAY 2
RBB

Round Robin Section


PAGE 7 OF 7

MATERIAL B
DAY 2
RBB

MATERIAL B
DAY 2
RBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HEVEA KB SDN BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at STe end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HEVEA KB SDN BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HEVEA KB SDN BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HEVEA KB SDN BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HEVEA KB SDN BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HEVEA KB SDN BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


PAGE 2 OF 7

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 7

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 7

Round Robin Section


PAGE 5 OF 7

Round Robin Section


PAGE 6 OF 7

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 7 OF 7

MATERIAL B
DAY 2
MBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : HOCK HIN (MUAR) RUBBER CO. SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HOCK HIN (MUAR) RUBBER CO. SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HOCK HIN (MUAR) RUBBER CO. SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES ROUND ROBIN CROSSCHECK

NAME OF LABORATORY : HOCK HIN (MUAR) RUBBER CO. SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 5

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 5

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 5

Round Robin Section


PAGE 5 OF 5

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEMBAGA INDUSTRI GETAH SABAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEMBAGA INDUSTRI GETAH SABAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEMBAGA INDUSTRI GETAH SABAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEMBAGA INDUSTRI GETAH SABAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEMBAGA INDUSTRI GETAH SABAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 6

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 6

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 6

Round Robin Section


PAGE 5 OF 6

Round Robin Section


PAGE 6 OF 6

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - KUALA KANGSAR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - KUALA KANGSAR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - KUALA KANGSAR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - KUALA KANGSAR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 5

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 5

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 5

Round Robin Section


PAGE 5 OF 5

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : FELDA PKBI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : FELDA PKBI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : FELDA PKBI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : FELDA PKBI

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 5

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 5

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 5

Round Robin Section


PAGE 5 OF 5

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - TAMPIN

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - TAMPIN

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - TAMPIN

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - TAMPIN

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 5

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 5

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 5

Round Robin Section


PAGE 5 OF 5

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT TENAGA GEMAS SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT TENAGA GEMAS SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT TENAGA GEMAS SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT TENAGA GEMAS SDN. BHD

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 5

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 5

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 5

Round Robin Section


PAGE 5 OF 5

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : TECHNOLOGY QUALITY CONTROL CENTRE

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : TECHNOLOGY QUALITY CONTROL CENTRE

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : TECHNOLOGY QUALITY CONTROL CENTRE

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : TECHNOLOGY QUALITY CONTROL CENTRE

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : TECHNOLOGY QUALITY CONTROL CENTRE

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : TECHNOLOGY QUALITY CONTROL CENTRE

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 8 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : TECHNOLOGY QUALITY CONTROL CENTRE

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 test portions

Round Robin Section


RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 9 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : TECHNOLOGY QUALITY CONTROL CENTRE

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


PAGE 2 OF 9

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 9

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 9

Round Robin Section


PAGE 5 OF 9

Round Robin Section


PAGE 6 OF 9

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 7 OF 9

MATERIAL B
DAY 2
MBB

Round Robin Section


PAGE 8 OF 9

(in.lb)

MATERIAL B
DAY 2
RBB

Round Robin Section


PAGE 9 OF 9

MATERIAL B
DAY 2
RBB

MATERIAL B
DAY 2
RBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SENG HIN RUBBER (M) SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SENG HIN RUBBER (M) SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SENG HIN RUBBER (M) SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SENG HIN RUBBER (M) SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 7

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 7

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 5 OF 7

Round Robin Section


PAGE 6 OF 7

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD. - KUALA LUMPUR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD. - KUALA LUMPUR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD. - KUALA LUMPUR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD. - KUALA LUMPUR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD. - KUALA LUMPUR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 6

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 6

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 6

Round Robin Section


PAGE 5 OF 6

Round Robin Section


PAGE 6 OF 6

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT CHUAN LEE RUBBER SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT CHUAN LEE RUBBER SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT CHUAN LEE RUBBER SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT CHUAN LEE RUBBER SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT CHUAN LEE RUBBER SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 test portions

Round Robin Section


RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 7

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : SYARIKAT CHUAN LEE RUBBER SDN. BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


PAGE 2 OF 7

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 7

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 7

Round Robin Section


PAGE 5 OF 7

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 6 OF 7

(in.lb)

MATERIAL B
DAY 2
RBB

Round Robin Section


PAGE 7 OF 7

MATERIAL B
DAY 2
RBB

MATERIAL B
DAY 2
RBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BUKIT MERTAJAM

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BUKIT MERTAJAM

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BUKIT MERTAJAM

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BUKIT MERTAJAM

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BUKIT MERTAJAM

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


PAGE 2 OF 6

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 6

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 6

Round Robin Section


PAGE 5 OF 6

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 6 OF 6

MATERIAL B
DAY 2
MBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BENTONG

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BENTONG

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BENTONG

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BENTONG

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - BENTONG

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


PAGE 2 OF 6

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 6

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 6

Round Robin Section


PAGE 5 OF 6

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 6 OF 6

MATERIAL B
DAY 2
MBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - LABIS

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - LABIS

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - LABIS

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : LEE RUBBER CO. (PTE) - LABIS

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 5

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 5

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 5

Round Robin Section


PAGE 5 OF 5

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD.- KEDAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD.- KEDAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD.- KEDAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD.- KEDAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD.- KEDAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD.- KEDAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 8 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD.- KEDAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 test portions

Round Robin Section


RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 9 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : MALAYAN TESTING LABORATORY SDN. BHD.- KEDAH

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


PAGE 2 OF 9

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 9

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 9

Round Robin Section


PAGE 5 OF 9

Round Robin Section


PAGE 6 OF 9

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 7 OF 9

MATERIAL B
DAY 2
MBB

Round Robin Section


PAGE 8 OF 9

(in.lb)

MATERIAL B
DAY 2
RBB

Round Robin Section


PAGE 9 OF 9

MATERIAL B
DAY 2
RBB

MATERIAL B
DAY 2
RBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : FELDA PASIR BESAR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : FELDA PASIR BESAR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : FELDA PASIR BESAR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 5

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : FELDA PASIR BESAR

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


PAGE 2 OF 5

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 5

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 5

Round Robin Section


PAGE 5 OF 5

MATERIAL B
DAY 2
WBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - BATU PAHAT

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - BATU PAHAT

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - BATU PAHAT

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - BATU PAHAT

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 6

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : KOTA TRADING CO. SDN BHD - BATU PAHAT

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


PAGE 2 OF 6

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 6

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 6

Round Robin Section


PAGE 5 OF 6

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 6 OF 6

MATERIAL B
DAY 2
MBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 4

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : CONTINENTAL TYRE TECHNOLOGY

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 4

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : CONTINENTAL TYRE TECHNOLOGY

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 4

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : CONTINENTAL TYRE TECHNOLOGY

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


PAGE 2 OF 4

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 4

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 4

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : T.A.R.R.C

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : T.A.R.R.C

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : T.A.R.R.C

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : T.A.R.R.C

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : T.A.R.R.C

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : T.A.R.R.C

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 8 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : T.A.R.R.C

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 test portions

Round Robin Section


RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 9 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : T.A.R.R.C

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


AGE 2 OF 9

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
AGE 3 OF 9

MATERIAL B
DAY 2
NBB

Round Robin Section


AGE 4 OF 9

Round Robin Section


AGE 5 OF 9

Round Robin Section


AGE 6 OF 9

MATERIAL B
DAY 2
WBB

Round Robin Section


AGE 7 OF 9

MATERIAL B
DAY 2
MBB

Round Robin Section


AGE 8 OF 9

(in.lb)

MATERIAL B
DAY 2
RBB

Round Robin Section


AGE 9 OF 9

MATERIAL B
DAY 2
RBB

MATERIAL B
DAY 2
RBB

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 2 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : EUROFINS NORTH MALAYA LABORATORY SDN.BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

01 DIRT, % wt. 02 INITIAL PLASTICITY, Po


(3 decimal places) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
DAA DAB DBA DBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

03 AGED PLASTICITY, P30 04 PLASTICITY RETENTION INDEX, %


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
PAA PAB PBA PBB PAA PAB PBA PBB
1 1
2 2
3 3
4 4
5 5

04 A OVEN TEMPERATURE RECORD

Date of testing

Type of oven

Initial temperature, °C

Temperature on closure of oven door, °C

Round Robin Section


Time to reach initial temperature after closure, °C min. and sec.

Temperature at the end of ageing period, °C

Date (Plastimeter last calibrated)

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 3 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : EUROFINS NORTH MALAYA LABORATORY SDN.BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

05 VOLATILE MATTER, % wt. 06 NITROGEN, % wt.


(2 decimal places) (2 decimal places)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
VMAA VMAB VMBA VMBB NAA NAB NBA NBB
1 1
2 2
3 3

07 ASH, wt %
(2 decimal places)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
AAA AAB ABA ABB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 4 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : EUROFINS NORTH MALAYA LABORATORY SDN.BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

08 COLOUR, LOVIBOND UNIT


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
CAA CAB CBA CBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 5 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : EUROFINS NORTH MALAYA LABORATORY SDN.BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

09 MOONEY VISCOSITY, ML (1+4)'


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MVAA MVAB MVBA MVBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 6 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : EUROFINS NORTH MALAYA LABORATORY SDN.BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

10 WALLACE ASHT, Po 11 WALLACE ASHT, PH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB WAA WAB WBA WBB
1 1
2 2
3 3

12 WALLACE ASHT, ∆P
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
WAA WAB WBA WBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 7 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : EUROFINS NORTH MALAYA LABORATORY SDN.BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

13 MOONEY ASHT, VO 14 MOONEY ASHT, VH


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB MAA MAB MBA MBB
1 1
2 2
3 3

15 MOONEY ASHT, ∆V
(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
MAA MAB MBA MBB
1
2
3

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 8 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : EUROFINS NORTH MALAYA LABORATORY SDN.BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

RHEOMETER MONSANTO MODEL TM 100

Temperature : Range : Chart Motor : Arc :

17 MINIMUM TORQUE, Tmin (in.lb) 18 MAXIMUM TORQUE, Tmax (in.lb)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

19 ∆T, Tmax-Tmin (in.lb)


(1 decimal place)
MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB
1
2
3

REMARKS :

ACS 1 - Single mix / 3 test portions

Round Robin Section


RAA and RBA mixing : TESTING :

RAB and RBB mixing : TESTING :

Round Robin Section


LEMBAGA GETAH MALAYSIA PAGE 9 OF 9

Malaysian Rubber Board

RESULT FORM FOR 130th SERIES PROFICIENCY TESTING PROGRAM

NAME OF LABORATORY : EUROFINS NORTH MALAYA LABORATORY SDN.BHD.

DATE OF TESTING : DAY 1 : 14.06.2017 DAY 2 : 15.06.2017

20 OPTIMUM TORQUE, T90 (in.lb) 21 SCORCH TIME, t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

22 OPTIMUM CURE TIME, t90 (min) 23 CURE RATE, t90-t2 (min)


(1 decimal place) (1 decimal place)
MATERIAL A MATERIAL B MATERIAL A MATERIAL B
SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2 SPECIMEN DAY 1 DAY 2 DAY 1 DAY 2
RAA RAB RBA RBB RAA RAB RBA RBB
1 1
2 2
3 3

Round Robin Section


PAGE 2 OF 9

MATERIAL B
DAY 2
PBB

EX, %

MATERIAL B
DAY 2
PBB

Round Robin Section


Round Robin Section
PAGE 3 OF 9

MATERIAL B
DAY 2
NBB

Round Robin Section


PAGE 4 OF 9

Round Robin Section


PAGE 5 OF 9

Round Robin Section


PAGE 6 OF 9

MATERIAL B
DAY 2
WBB

Round Robin Section


PAGE 7 OF 9

MATERIAL B
DAY 2
MBB

Round Robin Section


PAGE 8 OF 9

(in.lb)

MATERIAL B
DAY 2
RBB

Round Robin Section


PAGE 9 OF 9

MATERIAL B
DAY 2
RBB

MATERIAL B
DAY 2
RBB

Round Robin Section

You might also like