81-88001-010 快速安装指南

成品尺寸：82*142.5*mm
工艺材质：128g铜版纸
印刷模式：四色印刷

HT-TM05 PACKAGE CONTENTS HOW TO ACCESS NETWORK ATTACHED

•1 x HooToo TripMate Sith (HT-TM05) •1 x User Manual STORAGE (NAS)
•1 x USB Cable
You can attach a USB flash drive, an external HDD or a USB card reader as
your NAS.
FUNCTION DIAGRAM Battery LED Indicators
FUTURE NETWORK FOR TODAY Note:
Power Button Attaching a cell phone, tablet or camera as USB storage will not work. Enter password 11111111
Wi-Fi LED
Steps
1. Download “HooToo TripMate Plus” App
PC: Please download the application from www.HooToo.com
Output: 5V/2.1A max
Smartphone/iPhone/Android etc: Download and install the app from
App Store or Google Play.
Reset Button
Input: 5V/1.6A 2. Insert the USB thumb drive/USB HDD or any other USB storage device
into the USB port of the TripMate Sith.
Wi-Fi LED RJ45 3. Turn on your TripMate Sith and wait for the Wi-Fi indicator to become
• Flashing Blue: System Loading Ethernet solid.
• Solid Blue: System Loaded Interface Choose Tripmate Connection
• Solid Green: Internet Connected (WAN port)
• Off: No Internet Available
USB Storage
Power LED
• Short Press (1 second): Check how much battery is left
• Long Press (3 seconds): Turn on the TripMate
Example: Android
RJ45 Ethernet Interface (WAN port)
• To connect to your existing router/DSL/wired modem to set TripMate as
AP/Router/Bridge
Note:
The WAN port can only receive signals, which cannot be used as a LAN
Run HooToo Tripmate
output port.
4. From your own device or PC, turn on wireless connection and search
USB Host Interface Output (5V/2.1A max) for available network. You should be able to see “TripMateSith-XXXX” in
the Wi-Fi list.
• To attach a USB storage to make it accessible
• To charge your devices (max 2.1A ) 5. Connect to the “TripMateSith-XXXX” network using default password
11111111 (8 x 1s).
Input (5V/1.6A) 6. Once the connection is established, run the TripMate App. You can
access the storage via the app.

SITH
• To recharge TripMate Sith with 5V/1.6A power adapter (i.e. cell phone
adapter)
Example: Window 7
TRIPMATE Reset Button Basic Steps: Download the TripMate App >Attach the USB storage to your
ROUTER / NAS / POWER BANK • Please press the Reset Button with a needle-like object to restore the TripMate > Turn on the wireless connection of your PC and connect to your
TripMate to factory default (Please make sure TripMate Sith has 50% TripMate > Run the app to access the USB storage.
power left)

Default Username: admin Bridge Mode

Default Password: (empty)
USE TRIPMATE SITH AS A POWER BANK
In Bridge Mode, TripMate Sith can create a secured Wi-Fi with a new SSID Use TripMate Sith as a power bank to charge your mobile device by
Tips: based on an existing wireless network. simply connecting it to your device via USB charging cable.
* Make sure your mobile devices stay connected with your TripMate Connected The remaining capacity of battery can be checked by pressing the
Application:
already power button.
* For iOS users, access to local files are limited due to iOS framework. Small restaurant, shop, bar, home, office and others where Internet
Turn on the Wi-Fi service needs to be provided for guests without revealing the password of
Password
of your device
11111111
the existing network for hosts. MORE INFORMATION
HOW TO CONFIGURE YOUR TRIPMATE
To learn more about how to use Hootoo TripMate Sith, please visit our
(AP/ROUTER/BRIDGE) official site: www.hootoo.com.
We have only included a quick user guide so you can setup your
Access Point (AP) Mode Username：admin TtipMate with ease. To get the FULL GUIDE for iOS / Android / Windows /
Router Mode
In AP mode, the TripMate Sith is first connected to a wired network, Password: leave it blank PC, please download from HOOTOO official website.
then other devices can connect to the TripMate Sith via its Wi-Fi In this mode, the TripMate is connected to a DSL or cable modem and
works as a regular router.
connection. WARRANTY
TripMate Sith HT-TM05 is covered by HooToo 1 Year Full Warranty from
Wired Network 5. Click “Network Settings” – “Internet” – “Wired Access” where it will show
the date of its original purchase. This includes all parts of the device, but
Dynamic IP, Static IP, PPPoE for router setup. Please consult your
excludes all accessories and cables. Damage caused by abuse,
Power outlet network administrator or refer to the user documentation of your
network to check which one to select. Configuration: incorrect operating procedure, and natural disasters are also excluded
from our warranty.
ADSL Modem NOTE:
Line

Setting your TripMate to Bridge Mode will disable all its router
capabilities and turn it into an access point. It will cease to act as a
SERVICE AND SUPPORT
DHCP server. If you have any concerns or enquiries about HooToo products or
services, please contact HooToo support team via any of the following
*Static IP/ Dynamic IP/ PPPoE? 1. Open the TripMate Sith Login and Admin Page (Refer to Steps 1-5
methods.
When you use your DSL or cable from previous section “Router mode”
modem without the router, how
2. Click “Network Settings” – “Internet” – “Wireless Access” to create the
does it work? NORTH AMERICA
Static IP: It requires you to go into connection between your TripMate and your existing wireless
the TCP/IP setting and specify the Internet. Tel: 1-888-456-8468
IP address and DNS setting. Tech Support: 408-627-7503
3. TripMate Sith shall then broadcast the connection into a different (Monday-Friday 9:00 – 17:00 PST)
Dynamic IP: No IP address or DNS
Choose the way to SSID called 'TripMateSith-xxxx'. Address: 2228 Junction Ave, San Jose, CA 95131
settings are required to assign.
configure the router PPPoE: It requires you to specify E-mail: US - [email protected]
Configuration: mode CA - [email protected]
the username and password
1. Turn on your TripMate Sith assigned by your ISP EUROPE
2. Connect your TripMate Sith to router or existing wired network Configuration:
Scan available networks Address: ZBT International Trading GmbH, Lederstr
3. Wait for the Wi-Fi LED to turn GREEN 1. Turn on your TripMate Sith. Connect it to a well-established modem 21a, 22525 Hamburg, Deutschland
Tips: E-mail: UK - [email protected]
4. Now the Tripmate Sith has become an AP and a new connection 2. Ensure your device (PC/Smartphone/Tablet) is connected to TripMate
Sith already (refer to previous instructions) When connecting devices with network cables, make sure the cables are DE - [email protected]
named “TripMateSith-XXXX” will show in the list of Wi-Fi networks.
Select the SSID FR - [email protected]
Connect your device to it (default password 11111111). 3. Go to 10.10.10.254 via your web browser (IE, Safari, Firefox or an well connected. A loose connection is one of the most common reasons
ES - [email protected]
alternative web browser) of network setup problems. A solid green Wi-Fi indicator means normal
Note: IT - [email protected]
wired connection, Input the password
The same instructions apply for smartphones, tablets, laptops 4. Login with user name “admin” (all lower case) and no password (leave for the SSID
the password field blank) Please reset if indicator continues to flash blue and plug network cable in ASIA PACIFIC
and other wireless devices.
again. E - m a i l : JP- [email protected]