MAPLE-4C

Integrated Access TDM Multiplexer

MAPLE-4C

MAPLE-4C is a Managed, modular integrated Access TDM multiplexer with 512 x 512 cross connect ability, which integrates
multiple dedicated data, voice and LAN channels over multiple main (network) links. It can provide maximum 4E1 capacity for
accessing and transmission with cross-connect capacity is 512×512 64K. It provides full range of voice and digital data services to
subscribers located at different locations require to interconnect and establish a voice and data network over E1 link.

The flexible, 1U high, 19-inch, 3-slot modular MAPLE-4C Chassis with a wide choice of I/O (user interface) modules is designed
for applications ranging from small campus networks to multi-site corporate networks or extensive carrier access solutions.
Due to MAPLE-4C’s standards adherence, central office based cross-connect units (DACS) can separate voice and data, sending
each to the appropriate carrier or service.

MAPLE-4C enables carriers to successfully deploy bundled services and Internet access. The integration of a broad range of
services makes MAPLE-4C a cost-effective access device, with reduced deployment and maintenance costs. The equipment
conforms to international standards, ensuring compatibility in multi-vendor environments worldwide.
 Key Features
lCompact 1U high, 19-inch chassis
lNumber of uplink-slots : 1
lNumber of service-slots : 3
lModular construction with three (3) slots for hot-swappable I/O modules
lMax. E1 channels : 4
Cross-connect capacity 512×512 64K
Frame structure : Supports optional CRC-4 and PCM 30/31 settings.
Timing : Internal Crystal Oscillator clock, Clock received from any link
(loopback)
lVersatile 64Kbps User interface : Supports FXO/FXS Voice modules with
caller number display, E&M 2/4-wire module with adjustable voice gain,
hotline with standard signaling tone and V.24/RS-232 low speed module
Max. FXO/FXS channels : 30
Max E&M channels : 24
Max V.35 channels : 3
Max FE channels : 3
l Performance Monitor: Control panel provides ample control and alarm
function. When an E1 channel occurs errors, sound alarm will be activated
and LOS/LOF warning message of each E1 channel will be displayed.
Customer service can be allocated by on-line network operator.
l Flexible network topologies : Point-to-Point , Chain.
l Local and Remote Telnet support

Application

MAPLE-4C MAPLE-4C Local/Remote

E1 E1
Telnet
SDH

FXO ETH V.35 FXS FXS ETH V.35

Local/Remote
Telnet
 Technical Specifications
MAPLE-4C is a modular chassis with hot-swappable modules : l Voice Interfaces
l I/O modules : 4E1, FXO, FXS, Hot-line, 2/4W E&M, Channel sampling rate : 8 KHz
Companding law : A-law
RS232/V.24, ETH Voice Interface : 2W, 4W, Signalling, FXO, FXS, E&M
l Chassis(height) : 1U, 19-inch wide Frequency : 300 to 3400 Hz
l Number of Service-slots : 3 slots for I/O modules Impedance : 600 Ohms
Ring current voltage : 75 + 15V AC, 25 + 3 Hz
l Console port : 1 (RJ-45), Serial
l Telnet port : 10/100Mbps (RJ-45), Ethernet
l Data Interfaces
l Power supply : AC : 100V ~ 240V AC (220V nom) and Low speed data interface : RS232, V.24
DC : -36V ~ -72V (nom : -48V DC) Characteristic : ITU-T V.24
lPower consumption : =50 W Data Format : Asynchronous, Synchronous
lRinging generator : 75V, 25 Hz Bit rate
Asynchronous data : upto 19.2 Kbps
lEnvironment of operation Synchronous data : 64 Kbps ~ 128 Kbps
Operating Temperature : -5° to 50° centigrade
Air pressure : 86 to 106 KPa V.35 Data interface
Humidity : 5% to 95% RH, non-condensing Characteristic : ITU-T V.35
Bit Rate : N x 64 Kbps, N=1~31
l Physical Description : 483 (W) x 360(D) x 47(H) mm
l Uplink Interface : E1(4) Ethernet Data interface
Supports 512×512 cross connect ability based on 64K with signaling Characteristic : IEEE 802.3
Bit rate : 2048 +/- 50 ppm Bit Rate : N x 64 Kbps, N=1~31
Code : HDB3
Impedance : 120 Ohms Balanced
Electrical characteristics : ITU-T G.703
Transfer characteristics : ITU-T G.823
Jitter performance : ITU-T G.823

Ordering MAPLE-4C
M A P LE-4C P CM M ulti Service M ultiplexer chassis (1U-high) with 4 E1interface uplink (120 Ohms bal.,
MAPLE/4C/4E1/AC
RJ45 co nnecto r), 1Telnet po rt, 1Co nso le po rt, 3 mo dule slo ts, with o ne A C po wer supply
M A P LE-4C P CM M ulti Service M ultiplexer chassis (1U-high) with 4 E1interface uplink (120 Ohms bal.,
MAPLE/4C/4E1/DC
RJ45 co nnecto r), 1Telnet po rt, 1Co nso le po rt, 3 mo dule slo ts, with o ne DC po wer supply
Module types
MAPLE/4/M/10FXO A udio interface card fo r user, pro viding 10 FXO links per card

MAPLE/4/M/10FXS A udio interface card fo r user, pro viding 10 FXS links per card
MAPLE/4/M/4E&M/4W 4-wire E&M trunk interface card, 4 interfaces per card, RJ45 co nnecto r

MAPLE/4/M/8E&M/2W 2-wire E&M trunk interface card, 8 interfaces per card, RJ45 co nnecto r
2/4 wire E&M trunk interface card, 8 interfaces per card, o ne SCIC female co nnecto r. A dapter cable :
MAPLE/4/M/8E&M
Vo ice cable ( CB L-VOICE-SCSI50M (40)/NC-3m )
MAPLE/4/M/4V24 V.24 data interface card, pro viding fo ur V.24 links with DCE data interface, RJ45 co nnecto r.
V.35 data interface card, pro viding o ne V.35 link with DCE data interface, HDB 26 co nnecto r. (Cable to be
MAPLE/4/M/V35
o rdered separately)
MAPLE/4/M/8RS232 RS232 interface card, pro viding 8 links RS-232 A synchro no us channels, RJ45 co nnecto r

MAPLE/4/M/FE High speed Ethernet interface card, pro viding o ne 10/100 B ase-T Ethernet po rt, RJ45 co nnecto r.

Adaptor cable
V.35 adapter cable (HDB 26 male co nnecto r to ISO 2593 M 34 female co nnecto r (o f length 2.0 meters)
CBL-V35-HDB26M-M34F-2m
(Each mo dular co nverter needs o ne V.35 cable to co nnect to DTE.

MRO-TEK Limited
Bellary Road, Hebbal
Bangalore - 560 024, INDIA
Phone : +91-80-23332951
Fax : +91-80-23333415
Email : [email protected]
Web: www.mro-tek.com

TM

Copyright MRO-TEK Limited - 2013 is registered for Trade Marks with appropriate authorities.
Specifications are subject to change without notice. E & OE. V13_04