Scribd
Upload
40 views3 pages

Solid Particles Characterization

This document outlines procedures for characterizing the size, shape, and morphology of solid particles through measurement of diameters, roundness, and sphericity. Key measurements include projected diameters from different views, equivalent diameter of an assumed spherical particle, and calculations of roundness and sphericity. Results are presented for a selected solid particle, including average values summarized in a table. The document introduces the topic, describes the analyzed particle, and provides the framework for sections to analyze measurement results, draw conclusions, and cite references.

Uploaded by

Danny García
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views3 pages

Solid Particles Characterization

This document outlines procedures for characterizing the size, shape, and morphology of solid particles through measurement of diameters, roundness, and sphericity. Key measurements include projected diameters from different views, equivalent diameter of an assumed spherical particle, and calculations of roundness and sphericity. Results are presented for a selected solid particle, including average values summarized in a table. The document introduces the topic, describes the analyzed particle, and provides the framework for sections to analyze measurement results, draw conclusions, and cite references.

Uploaded by

Danny García
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Date:___________________ 1

Solids Particles characterization: Size,


diameters, roundness & sphericity
__________________________, __________________________, __________________________
Universidad Nacional de Colombia, Engineering Faculty
Chemical & Environmental Engineering Dpt.

Abstract (The abstract should not exceed 250 words).

Index Terms—At least four keywords or phrases in alphabetical order:

I. INTRODUCTION1
(Something about the importance of particles size, about
100 words; please cite as possible)

A. About the characterization of solid particles in


chemical engineering.

B. Description of the particle selected for this case.

1 Corresponding author:
II. PROCEDURES FOR CHARACTERIZATION OF A SOLID
PARTICLE Sphericity could be expressed as

A. Types of diameters: measuring (2)

A. Roundness

.
For this case, the roundness expression ares

(3a)
.
B. Types of diameters: drawing

(3b)

III. RESULTS
For projected diameter, the shapes obtained are depicted in
figure 1.

C. Types of diameters: Equivalent diameter

For an assumed spherical particle, equivalent diameter


could be expressed as:

(1)

D. Sphericity

Fig. 1. Projected diameters for the selected solid particle.


Date:___________________ 3

Finally, our results are summarized in table 1.

Symbol Type of measurement Average value/units

IV. RESULTS ANALYSIS

V. CONCLUSIONS

REFERENCES

(If necessary, please add more vignettes to this list)


[1]

[2]

You might also like