ISO TC60 list of standard 090915 ]

Standards and projects under the direct responsibility of TC 60

TC 60 - Gears
Secretariat and its SCs

Cylindrical gears for general and heavy engineering -- Standard basic

ISO 53:1998
rack tooth profile
Cylindrical gears for general engineering and for heavy engineering --
ISO 54:1996
Modules
Straight bevel gears for general engineering and heavy engineering --
ISO 677:1976
Basic rack
Straight bevel gears for general engineering and heavy engineering --
ISO 678:1976
Modules and diametral pitches
ISO 701:1998 International gear notation -- Symbols for geometrical data
ISO 1122-1:1998 Vocabulary of gear terms -- Part 1: Definitions related to geometry
ISO 1122-1:1998/Cor 1:1999
ISO 1122-2:1999 Vocabulary of gear terms -- Part 2: Definitions related to worm gear
Cylindrical gears -- ISO system of accuracy -- Part 1: Definitions and
ISO 1328-1:1995
allowable values of deviations relevant to corresponding flanks of gear
Cylindrical gears -- ISO system of accuracy -- Part 2: Definitions and
ISO 1328-2:1997
allowable values of deviations relevant to radial composite deviations
Cylindrical gears -- Information to be given to the manufacturer by the
ISO 1340:1976
purchaser in order to obtain the gear required
Straight bevel gears -- Information to be given to the manufacturer by the
ISO 1341:1976
purchaser in order to obtain the gear required
Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40
ISO 2490:2007
module -- Nominal dimensions
ISO 4468:2009 Gear hobs -- Accuracy requirements
Calculation of load capacity of spur and helical gears -- Part 1: Basic
ISO 6336-1:2006
principles, introduction and general influence factors
ISO 6336-1:2006/Cor 1:2008
Calculation of load capacity of spur and helical gears -- Part 2:
ISO 6336-2:2006
Calculation of surface durability (pitting)
ISO 6336-2:2006/Cor 1:2008
Calculation of load capacity of spur and helical gears -- Part 3:
ISO 6336-3:2006
Calculation of tooth bending strength
ISO 6336-3:2006/Cor 1:2008
Calculation of load capacity of spur and helical gears -- Part 5: Strength
ISO 6336-5:2003
and quality of materials
Calculation of load capacity of spur and helical gears -- Part 6:
ISO 6336-6:2006
Calculation of service life under variable load
ISO 6336-6:2006/Cor 1:2007
ISO 8579-1:2002 Acceptance code for gear units -- Part 1: Test code for airborne sound
Acceptance code for gears -- Part 2: Determination of mechanical
ISO 8579-2:1993
vibrations of gear units during acceptance testing
ISO 9083:2001 Calculation of load capacity of spur and helical gears -- Application to
Calculation of load capacity of spur and helical gears -- Application for
ISO 9085:2002
industrial gears
ISO TC60 list of standard 090915 ]

Code of inspection practice -- Part 1: Inspection of corresponding flanks

ISO/TR 10064-1:1992
of gear teeth
ISO/TR 10064-1:1992/Cor 1:2006
Code of inspection practice -- Part 2: Inspection related to radial
ISO/TR 10064-2:1996
composite deviations, runout, tooth thickness and backlash
ISO/TR 10064-2:1996/Cor 1:2001
ISO/TR 10064-2:1996/Cor 2:2006
Code of inspection practice -- Part 3: Recommendations relative to gear
ISO/TR 10064-3:1996
blanks, shaft centre distance and parallelism of axes
ISO/TR 10064-3:1996/Cor 1:2006
Code of inspection practice -- Part 4: Recommendations relative to
ISO/TR 10064-4:1998
surface texture and tooth contact pattern checking
ISO/TR 10064-4:1998/Cor 1:2006
Code of inspection practice -- Part 5: Recommendations relative to
ISO/TR 10064-5:2005
evaluation of gear measuring instruments
ISO/TR 10064-5:2005/Cor 1:2006
ISO/TR 10064-6:2009 Code of inspection practice -- Part 6: Bevel gear measurement methods
Calculation of load capacity of bevel gears -- Part 1: Introduction and
ISO 10300-1:2001
general influence factors
Calculation of load capacity of bevel gears -- Part 2: Calculation of
ISO 10300-2:2001
surface durability (pitting)
Calculation of load capacity of bevel gears -- Part 3: Calculation of tooth
ISO 10300-3:2001
root strength
ISO 10825:1995 Gears -- Wear and damage to gear teeth -- Terminology
ISO/TR 10828:1997 Worm gears -- Geometry of worm profiles
ISO/TR 10828:1997/Cor 1:1998
ISO/TR 13593:1999 Enclosed gear drives for industrial applications
ISO/TR 13593:1999/Cor 1:2005
ISO 13691:2001 Petroleum and natural gas industries -- High-speed special-purpose gear
Calculation of scuffing load capacity of cylindrical, bevel and hypoid
ISO/TR 13989-1:2000
gears -- Part 1: Flash temperature method
Calculation of scuffing load capacity of cylindrical, bevel and hypoid
ISO/TR 13989-2:2000
gears -- Part 2: Integral temperature method
ISO 14104:1995 Gears -- Surface temper etch inspection after grinding
Gears -- Thermal capacity -- Part 1: Rating gear drives with thermal
ISO/TR 14179-1:2001
equilibrium at 95 °C sump temperature
ISO/TR 14179-2:2001 Gears -- Thermal capacity -- Part 2: Thermal load-carrying capacity
Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for
ISO 14635-1:2000
relative scuffing load-carrying capacity of oils
Gears -- FZG test procedures -- Part 2: FZG step load test A10/16,
ISO 14635-2:2004
6R/120 for relative scuffing load-carrying capacity of high EP oils
Gears -- FZG test procedures -- Part 3: FZG test method A/2, 8/50 for
ISO 14635-3:2005
relative scuffing load-carrying capacity and wear characteristics of
ISO 17485:2006 Bevel gears -- ISO system of accuracy
ISO 18653:2003 Gears -- Evaluation of instruments for the measurement of individual
ISO/TR 18792:2008 Lubrication of industrial gear drives
Gears -- Cylindrical involute gears and gear pairs -- Concepts and
ISO 21771:2007
geometry
ISO 23509:2006 Bevel and hypoid gear geometry
ISO 81400-4:2005 Wind turbines -- Part 4: Design and specification of gearboxes
ISO 81400-4:2005/Cor 1:2005