Scribd
Upload
258 views

Process Capability Plan Form

Process Capability Plan Form

Uploaded by

Mani Rathinam Rajamani
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
258 views

Process Capability Plan Form

Process Capability Plan Form

Uploaded by

Mani Rathinam Rajamani
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

AS13006 -Process Control Methods - Appendix E - Process Capability Plan form

Description of change Alignment to AS13006 revision Template revision


Original issue Rev - Rev -
This document contains the checklist and templates referred to within AS13006 - Process

The AS standards are available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001, Telephone: 877-606-7323
USA), Web address: http://www.sae.org

Instructions:
Enter data in table below. Data will populate on successive tabs.
In order for data to populate successive tabs, please either Preview or Print.

This document contains data classified as shown below:

Data not technical:


Classification analysis Date:

WARNING Long description (unlimited number of characters)

Type of export control classification


(for instance: ECCN, USML, …):

Other restrictions or comments


(IP):

Copyright @ AESQ Strategy Group, a Program of SAE ITC. This material is provided by SAE "AS IS" and may be reproduced, u
hereby holds SAE harmless from user's manipulation of the forms and indemnifies SAE from any and all claims or damages c
to within AS13006 - Process Control Methods

1, Telephone: 877-606-7323 (inside USA and Canada) or 724-776-4970 (outside


www.sae.org

assified as shown below:

Short description (35 characters), to be presented on the


header of each page

S" and may be reproduced, used and modified under the condition that the user
y and all claims or damages caused by use, modification or applications thereof.
Process Capability Plan Form Document No.
Part Number
Engineering Drawing
issue
Associated (MSA study)
Documents (Control Plan)
(Capability 6-pack)

Critical
Sheet Grid Feature Tolerance GR&R Statistical Current Process Analysis
No. Nominal LSL USL Major Action Plan
No. Ref. Description Type (% of tol) Control Status Capability Period
Minor
0 2 D1 Outside Diameter Bilateral 0.210" 0.208 0.212 Minor 5.0% Out of Control Cpk = 0.71 2018 Q1 Work with Tool Design to investigate a more rigid type of tooling.

0 3 G9 Runout to Dia. A Unilateral Max 0 n/a 0.004 Minor 12.2% In Control Cpk = 0.85 2018 Q2 New collet set ordered; Maintenance of spindle scheduled 5/15
1
2
3
4
5
6
7
8
9
etc.

Manufacturing Engineering Name: Signature:


Date:
Engineering Name: Signature:
Date:
Quality Name: Signature:
Date:
Name: Signature:
Date:

AS13006 Process Capability Plan form AESQ Rev 0

You might also like