Scribd
Upload
160 views

Technical Report Structure

The document provides guidelines for writing a technical report, including its common structure and presentation format. A technical report typically contains several key sections: a title page, summary, table of contents, introduction, body, conclusions, references, bibliography, acknowledgements, and appendices. The body of the report is divided into numbered and headed sections that separate different main ideas in a logical order. The document also provides presentation guidelines, recommending that technical reports be printed single-sided on white A4 paper, with margins of at least 2.54 cm and page numbers excluding preliminary pages.

Uploaded by

Marvin Tan Maglinao
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
160 views

Technical Report Structure

The document provides guidelines for writing a technical report, including its common structure and presentation format. A technical report typically contains several key sections: a title page, summary, table of contents, introduction, body, conclusions, references, bibliography, acknowledgements, and appendices. The body of the report is divided into numbered and headed sections that separate different main ideas in a logical order. The document also provides presentation guidelines, recommending that technical reports be printed single-sided on white A4 paper, with margins of at least 2.54 cm and page numbers excluding preliminary pages.

Uploaded by

Marvin Tan Maglinao
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Report

A technical report is a formal report designed to convey technical information in a clear and easily
accessible format. It is divided into sections which allow different readers to access different levels of
information. This guide explains the commonly accepted format for a technical report; explains the
purposes of the individual sections; and gives hints on how to go about drafting and refining a report in
order to produce an accurate, professional document.

Structure
A technical report should contain the following sections;

Section Details
Must include the title of the report. Reports for assessment, where the
Title page word length has been specified, will often also require the summary word
count and the main text word count
A summary of the whole report including important features, results and
Summary
conclusions
Numbers and lists all section and subsection headings with page
Contents
numbers
States the objectives of the report and comments on the way the topic of
Introduction the report is to be treated. Leads straight into the report itself. Must not be
a copy of the introduction in a lab handout.
The sections which make up Divided into numbered and headed sections. These sections separate the
the body of the report different main ideas in a logical order

Conclusions A short, logical summing up of the theme(s) developed in the main text

Details of published sources of material referred to or quoted in the text


References
(including any lecture notes and URL addresses of any websites used.

Other published sources of material, including websites, not referred to in


Bibliography
the text but useful for background or further reading.
List of people who helped you research or prepare the report, including
Acknowledgements
your proofreaders
Any further material which is essential for full understanding of your report
Appendices (if appropriate) (e.g. large scale diagrams, computer code, raw data, specifications) but
not required by a casual reader
3 Presentation
For technical reports required as part of an assessment, the following presentation guidelines are
recommended;
The report must be printed single sided on white A4 paper. Hand written or dot-matrix
Script
printed reports are not acceptable.
Margins All four margins must be at least 2.54 cm
Page Do not number the title, summary or contents pages. Number all other pages consecutively
numbers starting at 1
A single staple in the top left corner or 3 staples spaced down the left hand margin. For
Binding
longer reports (e.g. year 3 project report) binders may be used.

You might also like