HIGH-ACCURACY LENGTH MEASURING SYSTEMS

SENSOR SYSTEMS
IDEAL FOR MEASURING THE OUTSIDE DIAMETER OF
STEEL BALLS AND ROLLERS FOR ANTI-FRICTION BEARINGS

PRE1478
 High-accuracy Length Measuring System
Features
• The wide 10mm measuring range is achieved with a high resolution and accuracy
specification that eliminates the inconvenience of the need for frequent resetting to
master gages, as required by conventional comparator-type gages, and so fewer of these
gages are needed.
• Measurement data can be stored and controlled by PC software.
• The system can measure high-precision parts such as steel balls and rollers for anti-
friction bearings by comparison with a master gage, also allowing use as the standard of
calibration and evaluation of master gages.

LGH stand Inspection of high-precision parts Custom stand 1*

971750 Useful for making a stand to mount a custom jig
(to user-specified dimensions).
This LGH stand greatly helps the gage to achieve high
accuracy. * Custom-made option
Mass: 23 kg
Tapped holes
Maximum measuring range for mounting jig
LGH-0510(C)-B-EH :
0-139 mm 300
LGH-1010(C)-B-EH : * Needle contact-point mounting example
0-137 mm
Measuring table: PC software: SENSORPAK
250

granite
02NGB070
This is a software program that allows graphic
110 meter indication and control chart display as well as
ø50 record/storage of measurement data. Custom stand 2*
Useful for making a stand incorporating a high-
Gage mounting
hole
accuracy ceramic platen.
ø15H7 (Flatness: 0.3μm)
（350）
100
270

* Custom-made option
25
34∼175

80

* To connect between a PC and the exclusive counter, a

USB cable (A-B type) is required separately.
ø30mm mounting bush*
For mounting on a commercially-available stand.
(User-specified size acceptable)
* Custom-made option External signal input connector*
Quality Assurance
Allows external signals to trigger data output and Standard Accessories:
zero-set the counter in combination with the foot Inspection certificate
switch. * Custom-made option
Application example
•Data output trigger
•Preset (zero-set)
•Peak hold clear

Spindle lifting cable

971753 Mass: 50 kg
Allows the LGH spindle to be lifted and lowered
without touching the measuring head.

Counter

External signal
input connector

Footswitch Option
LGH Stand 971750 · Calibration certificate
Spindle lifting cable 971753 · Traceability system chart
PC software: SENSORPAK 02NGB070

2
Specifications
Resolution 0.01μm / Accuracy 0.2μm model Resolution 0.005μm / Accuracy 0.1μm model
Order No. 542-715 (Standard) 542-716 (Low measuring force) 542-720 (Standard) 542-721 (Low measuring force)
Model LGH-1010-B-EH LGH-1010C-B-EH LGH-0510-B-EH LGH-0510C-B-EH
Measuring range 10mm
Resolution 0.01μm (0.05 μm, 0.1μm, 0.5 μm, 1μm can be selected from the counter) 0.005 μm (0.01μm, 0.05 μm, 0.1μm can be selected from the counter)
Measuring accuracy (20°C) *1 0.2 μm 0.1μm
Repeatability (20°C) *1 0.1μm ( 2σ) 0.02 μm ( 2σ)
Retrace error (20°C) *1 0.1μm 0.05 μm
Contact point downwards 0.65 N or less Approx. 0.12 N 0.65 N or less Approx. 0.1 N
Measuring
Contact point horizontal 0.55 N or less Not applicable 0.55 N or less Not applicable
force
Contact point upwards 0.45 N or less Not applicable 0.45 N or less Not applicable
Maximum operation speed In normal measurement: 700 mm/sec; for peak detection: 120 mm/sec In normal measurement: 250 mm/sec
Contact point Carbide-tipped, Sø3mm (M2.5 (P=0.45)×5mm), standard contact point: 901312 Carbide sphere SR5 (M2.5 (P=0.45) × 5 mm), standard contact point: 120058
Stem ø15 mm
Functions Zero-setting, presetting, direction changeover, tolerance, judgment (3 steps/5 steps)
Hold function Yes No
Power supply Suppplied AC Adapter, or +12 to 24V DC, max 700 mA
Operating temperature/humidity 0°C-40°C (Reference temperature 20°C)/20-80%RH (no condensation) 10°C -30°C (Reference temperature 20°C)/30- 70%RH (no condensation)
Storage temperature/humidity −10°C-60°C/20-80%RH (no condensation) −10°C -60°C/20- 80% (no condensation) *2
Standard accessories Wrench for contact point, rubber boot, stand, washer (for counter), AC Adapter, AC cord, DC plug, user's manual, inspection certificate
*1 Applies when used with counter (excluding quantizing error).
*2 The storage temperature/humidity range after unpacking is the same as the operating temperature/humidity range.
Refer to the Linear Gage(Catalog No.E13013) for more details

Dimensions
LGH-1010(C)-B-EH LGH-0510(C)-B-EH Exclusive Counter (set) Unit: mm
(37.6) (25*) Cable Assy
R2 45.4 Cable 19.4 138
0* (2m)
(2m)
Fixation of power cord
68
(14)
ø10.4
ø4.8

7.5
85
85

Connector (detachable)
Connector for Connector for
145.9

lifting cable
148.3

lifting cable
148.2
137

0 0
ø15h6 -0.011 ø15h6 -0.011
(stem) 25
25

Stem dia Stem dia

for fixation for fixation
11.2
60.9
63.3

°
Approx.10
10.5

144 (Tilt angle when stand equipped)

542-716 (low measuring force)
(Stand equipped)

18 18 542-721 (low measuring force)

(Rubber boot equipped)
(stroke) 10.5

LGH-1010C-B-EH 10 10
40 LGH-0510C-B-EH
75.1
72

Rubber boot not equipped 20 40

97

Rubber boot not equipped 20

Carbied-tipped, Sø3 542-715 (standard) Carbide sphere SR5 542-720 (standard)
901312 LGH-1010-B-EH LGH-0510-B-EH
120058
* Minimum bending radius or minimum dressed dimension 156 (Stand equipped)

3
 © MITUTOYO/D 03/18 PRE1478
Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring
Whatever your challenges are,
Mitutoyo supports you from start to finish.

Mitutoyo is not only a manufacturer of top quality

measuring products but one that also offers qualified
support for the lifetime of the equipment, backed up
by comprehensive services that ensure your staff can
make the very best use of the investment.
Test Equipment Small Tool Instruments
Sensor Systems Digital Scale and DRO Systems Apart from the basics of calibration and repair,
and Seismometers and Data Management
Mitutoyo offers product and metrology training,
as well as IT support for the sophisticated software
used in modern measuring technology. We can also
design, build, test and deliver bespoke measuring
solutions and even, if deemed cost-effective, take
your critical measurement challenges in-house on a
sub-contract basis.

Find additional product literature

and our product catalogue

www.mitutoyo.eu Mitutoyo Europe GmbH

Borsigstraße 8-10
41469 Neuss

Note: Product illustrations are without obligation. Product descriptions, in particular any and all technical Tel. +49 (0) 2137-102-0
specifications, are only binding when explicitly agreed upon. Fax +49 (0) 2137-102-351
MITUTOYO and MiCAT are either registered trademarks or trademarks of Mitutoyo Corp. in Japan and/or other countries/regions.
Other product, company and brand names mentioned herein are for identification purposes only and may be the
[email protected]
trademarks of their respective holders. www.mitutoyo.eu