TANK, API-650/653 Analysis Intergraph CAS.

@1994-2012 1
Licensed To: TECHNOCAD ID: 27152
Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

API-650/653 GENERAL TANK DATA :

API-650 11th Edition, Addendum 3, Aug. 2011

API Design Code ( 650 or 653 )......................... 650

Design Method (V, O, or A) ............................ O

(V=variable, O=one foot, A=Appendix A)

Run Objective (D=design, A=analyze) ................... D

Design Temperature ...............................(F ) 122.00

Design Pressure at Top ....................(lb./sq.in.) 0.00000

Shell Material ........................................ A-516,70

Ratio of Normal Operating Pressure/Design Pressure [Fp] 0.40000

Shell Design Stress [Sd] ..................(lb./sq.in.) 25300.

Shell Hydro Test Stress [St] ..............(lb./sq.in.) 28500.

Tank Nominal Diameter [D] ........................(ft.) 58.140

Tank Shell Height [HTK] ..........................(ft.) 29.930

Design Liquid Level [H] ..........................(ft.) 28.795

Liquid Specific Gravity [G] ........................... 1.0000

Weight of Attachments/Structures..................(lb.) 0.00000

Distance down to Top Wind Girder .................(ft.) 0.00000

Joint Efficiency (App A or 653) [E] ................... 1.0000

Wind Velocity .............................(ft./sec. ) 117.30

Insulation Thickness .............................(in.) 0.00000

Insulation Density ........................(lb./cu.in.) 0.00000

Include Annular Base Plate Details .................... Yes

Include Wind Moment in Appendix F_4_2 Calculations .... Yes

TANK, API-650/653 Analysis Intergraph CAS. @1994-2012 2
Licensed To: TECHNOCAD ID: 27152
Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

Number of Shell Courses ............................... 4

Shell Course # 1 Height ..........................(ft.) 7.9560

Shell Course # 1 Thickness .......................(in.) 0.31200

Shell Course # 1 Corrosion Allowance [CA] ........(in.) 0.62500E-01

Shell Course # 2 Height ..........................(ft.) 7.9560

Shell Course # 2 Thickness .......................(in.) 0.25000

Shell Course # 2 Corrosion Allowance [CA] ........(in.) 0.62500E-01

Shell Course # 3 Height ..........................(ft.) 7.9560

Shell Course # 3 Thickness .......................(in.) 0.25000

Shell Course # 3 Corrosion Allowance [CA] ........(in.) 0.62500E-01

Shell Course # 4 Height ..........................(ft.) 6.0620

Shell Course # 4 Thickness .......................(in.) 0.25000

Shell Course # 4 Corrosion Allowance [CA] ........(in.) 0.62500E-01

TANK SHELL COURSE MATERIALS :

Shell Course # 1 Material Name ........................ A-516,70

Shell Course # 1 Design Stress [Sd] .......(lb./sq.in.) 25300.

Shell Course # 1 Hydro Test Stress [St] ...(lb./sq.in.) 28500.

Shell Course # 1 Minimum Yield Stress .....(lb./sq.in.) 38000.

Shell Course # 1 Minimum Tensile Stress ...(lb./sq.in.) 70000.

Shell Course # 1 Maximum Thickness ..............(in. ) 1.5000

Shell Course # 1 Material Grade ....................... 70

Shell Course # 1 Material Group ....................... 4

Shell Course # 2 Material Name ........................ A-516,70

Shell Course # 2 Design Stress [Sd] .......(lb./sq.in.) 25300.

Shell Course # 2 Hydro Test Stress [St] ...(lb./sq.in.) 28500.

Shell Course # 2 Minimum Yield Stress .....(lb./sq.in.) 38000.

TANK, API-650/653 Analysis Intergraph CAS. @1994-2012 3
Licensed To: TECHNOCAD ID: 27152
Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

Shell Course # 2 Minimum Tensile Stress ...(lb./sq.in.) 70000.

Shell Course # 2 Maximum Thickness ..............(in. ) 1.5000

Shell Course # 2 Material Grade ....................... 70

Shell Course # 2 Material Group ....................... 4

Shell Course # 3 Material Name ........................ A-516,70

Shell Course # 3 Design Stress [Sd] .......(lb./sq.in.) 25300.

Shell Course # 3 Hydro Test Stress [St] ...(lb./sq.in.) 28500.

Shell Course # 3 Minimum Yield Stress .....(lb./sq.in.) 38000.

Shell Course # 3 Minimum Tensile Stress ...(lb./sq.in.) 70000.

Shell Course # 3 Maximum Thickness ..............(in. ) 1.5000

Shell Course # 3 Material Grade ....................... 70

Shell Course # 3 Material Group ....................... 4

Shell Course # 4 Material Name ........................ A-516,70

Shell Course # 4 Design Stress [Sd] .......(lb./sq.in.) 25300.

Shell Course # 4 Hydro Test Stress [St] ...(lb./sq.in.) 28500.

Shell Course # 4 Minimum Yield Stress .....(lb./sq.in.) 38000.

Shell Course # 4 Minimum Tensile Stress ...(lb./sq.in.) 70000.

Shell Course # 4 Maximum Thickness ..............(in. ) 1.5000

Shell Course # 4 Material Grade ....................... 70

Shell Course # 4 Material Group ....................... 4

ANCHOR BOLT DETAILS :

Anchor Bolt Diameter (optional) ..................(in.) 0.00000

Threads per Unit Length ........................(1/in.) 8.0000

Bolt Allowable Stress .....................(lb./sq.in.) 20000.

Number of Anchor Bolts (optional) ..................... 0.00000

Bolt Yield Stress .........................(lb./sq.in.) 36000.

Bolt Offset from Mean Tank Diameter ..............(ft.) 0.00000

Anchor Bolt Corrosion Allowance (optional) .......(in.) 0.12500

TANK, API-650/653 Analysis Intergraph CAS. @1994-2012 4
Licensed To: TECHNOCAD ID: 27152
Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

Wind Data :

Kz parameter .......................................... 0.98000

Kzt parameter ......................................... 1.0000

Kd parameter .......................................... 0.95000

Importance Factor (I) ................................. 1.1500

Gust Factor (G) ....................................... 0.85000

API-650 ROOF DETAILS SPECIFICATION :

Roof Type (1-4) ....................................... 1

(1=Supt Cone 2=Rafter Supt Cone 3=Cone 4=Dome 5=Umbrella)

Angle Between Roof and Horizontal ................(deg) 3.5700

Net Area at Roof/Shell Junction [A] ...........(sq.in.) 3.2000

Thickness of Roof Plate ..........................(in.) 0.18750

Roof Plate Corrosion Allowance ...................(in.) 0.00000

Weight of Snow on Roof ...........................(lb.) 0.00000

Roof Live Load ............................(lb/ft2 ) 20.000

---/ For General Roof, No Design /---

Weight of Roof Plates ............................(lb.) 0.00000

Weight of Roof Framing ...........................(lb.) 0.00000

Pct of Weights Supported by Shell ..................... 0.00000

---/ For Supported Cone Roof Design /---

Preferred Rafter Type (W, WT, S, C) ................... W

Preferred Girder Type (W, WT, S, C) ................... W

Preferred Column Type (W, WT, S, C, DC, DI, P ) ....... P

Roof Plate Material ................................... A-516,70

Roof Plate Allowable Design Stress ........(lb./sq.in.) 25300.

Structural Member Material ............................ A-36

Structural Member Allowable Design Stress..(lb./sq.in.) 23200.

TANK, API-650/653 Analysis Intergraph CAS. @1994-2012 5
Licensed To: TECHNOCAD ID: 27152
Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

Maximum Allowed Rafter Length ....................(ft.) 26.630

Maximum Allowed Girder Length ....................(ft.) -1.0101

Center Column Cap Plate Diameter .................(ft.) 6.0000

API-650 SEISMIC DATA (App E.) :

Minimum Yield Strength of Bottom Plate .....(lb./sq.in. 38000.

Minimum Yield Strength of Weld Material ....(lb./sq.in. 58000.

Nominal Thickness of Bottom Plate (tb) ..........(in. ) 0.31200

Seismic Use Group (SUG)................................ 2.0000

Friction Factor ....................................... 0.40000

Importance Factor ..................................... 1.2500

Initial Anchorage Type ................................ S

Earthquake Type ....................................... M

Site Class ............................................ 3.0000

Spectral Acceleration Adjustment Coefficient (K) ...... 1.5000

Scaling Factor (Q) .................................... 0.66667

Transtiional Period (TL) .............................. 8.0000

Mapped maximum earthquake for short periods (Ss) ...... 0.50000

Mapped maximum earthquake for 1 sec periods (S1) ...... 0.18000

Mapped maximum earthquake for 0 sec period (S0) ...... 0.20000

Non-ASCE peak ground acceleration (Sp) ................ 0.00000

ASCE short period design acceleration parameter (SDS).. 0.00000

--- Site Specific Data ---

Spectral acceleation parameter at 0 period (Sa0*) ..... 0.00000

Spectral acceleation parameter at any period (Sa*) .... 0.00000

COMPUTATION CONTROL DIRECTIVES

 TANK, API-650/653 Analysis Intergraph CAS. @1994-2012 6
Licensed To: TECHNOCAD ID: 27152
Job: Ejercicio Clase G2 /16/13 Time: 18:19:19 Ver: 4.00

ROOF_PROJECTION_IN_WIND_MOMENT= YES

SHELL_THICK_CONVERG_TOLERANCE= 0.49999999E-02 in.

GENERATE_MESSAGE_FILE= NO

COSINE_CURVE_TOLERANCE= 0.30000001

COSINE_CURVE_ITERATION_LIMIT= 100.00000

WIND_GIRDER_SHELL_THICKNESS= MAX

SHELL_SETTLEMENT_METHOD= FOURIER_SERIES

CORRODED_NOZZLES= NO

653_CORRODED_HYDROTEST_CASE= NO

THICKNESS_ROUNDUP_TO_NEAREST= 0.00000000 in.

PLATE_MATERIAL_DENSITY= 0.28360000 lb./cu.in.

MODIFY_FLUID_HEIGHT_BY_PRESSURE= NO

ROUND_ANCHOR_BOLTS_BY= 4.0000000

WIND_MOMENT_IN_APP_F Sect_5.9.7.1

FULL_SHELL_WEIGHT_IN_APP_F YES

TANK(c) Intergraph CADWorx & Analysis Solutions, Inc. 2012