WHEELED LOADER WA270PT-3 ACTIVE PLUS

Engine output: 103 kW/141 HP/2.200 rpm

Bucket sizes: 2.0–2.4 m³
Operating weight: 12.7 ton

• Low emission and powerful Komatsu S6D102E1 engine provides an environmentally friendly and fuel efficient operation
• Large bucket capacity and dumping clearance enhance overall productivity and working efficiency
• Easy change of front attachment with hydraulic quick coupler (standard)
• Perfect parallelism provides wider application and easy loading
• The new, fully automatic “High Efficiency” four-gearshift transmission provides optimum speed, resulting in greater manoeuvrability and noiseless driving
• Kick-down switch on the loader control lever improves pile-penetration and scooping operations
• Limited slip differentials with reduced locking value ensure a smoother, positive ride on rough terrain for longer tyre life
• Reduced outside noise level of 106 dB(A) meets 95/27/EC
• Rubber-mounted floor frame reduces vibration and noise. Noise level in the cab is 75 dB(A) by 95/27/EC
• Durable and ergonomically designed steps and handrails guarantee safety and comfort
• Adjustment-free service brakes provide greater acount for higher performance and reduced downtime
• Gull-wing engine side covers facilitate easy engine access and easy checking/replacement of engine oil or filters
• Rust-resistant high-quality paint assures good appearance and longer service life
Dimensions and Operating Data.

B: Wheel base 2900 mm

D: Width over tires 2440 mm
E: Tread 1880 mm
F: Ground clearance 460 mm
H: Height of cab 3250 mm
c: Hinge pin height 3838 mm
Tyre 20.5 R 25

Standard Loading High dump bucket Engine emissions ISO 8178

HC = 0,70 (1,3)
Bucket SAE heaped 2.0 m³ 2.15 m³ 4.0 m³ CO = 0,74 (5,0)
Density 1.75 ton/m³ 1.6 ton/m³ 0.6 ton/m³ NOx = 8,47 (9,2)
PM = 0,31 (0,7)
Payload 3500 kg 3400 kg 2400 kg
Figures in ( ) show the limit of new EC
C Bucket width 2500 mm 2500 mm 2550 mm regulation of the year 2001.
Bucket weight 860 kg (teeth) 930 kg (BOC) 1630 kg (BOC)

Static tipping load straight 8200 kg 8100 kg 6600 kg

Static tipping load articulated 7400 kg 7320 kg 5700 kg
Breakout force 96 kN 91 kN 79 kN
Lift capacity (on ground) 99 kN 98 kN 86 kN

Turning radius at corner of bucket teeth 5995 mm – –

Turning radius at corner of bucket 5950 mm 5990 mm 6005 mm

A Overall lenght 7250 mm (teeth) – –

7060 mm 7135 mm 7985 mm
a Dumping reach 1324 mm (teeth) – –
1188 mm 1128 mm 1780 mm
b Dumping clearance 2525 mm (teeth) – –
2726 mm 2667 mm 4645 mm Fork
d Total heigth 5385 mm 5380 mm 6040 mm b Dumping clearance (fork clearance) 3606 mm
e Digging depth 126 mm 90 mm 120 mm a Dumping reach (fork reach) 2037 mm
d Total height 4672 mm
g Clearance at bucket horizontal 3608 mm 3573 mm –
Static tipping load, 0° (ISO 8313) 6625 kg
Operating weight 12600 kg 12670 kg 13370 kg Static tipping load, 40° 5905 kg
* All data shown with mounted quick coupler Max. pay load EN 474, 80 % 4500 kg
Lift capacity 91 kN

In most cases, the actual volume

Bucket type Capacity
ranges higher than the ISO/SAE
in m³ classification. The table specifies
the optimum bucket with
reference to the material.
Bucket 2.0

Bucket Density
Material filling % t/m³
Bucket 2.15
Earth 100–115 1.5–1.6
Loading bucket 2.4 Clay 110–120 1.5–1.7
Sand 100–110 1.4–1.8
Gravel 85–110 1.5–2.0
Material density in (t/m³) 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 Rock 75–100 1.6–2.0

not economical recommended fully utilised

The specifications at a glance.
The actual standard equipment varies according to the sales territory.
Please contact your KOMATSU distributor for any further information.

Engine Chassis
Make KOMATSU System All-wheel drive, planetary reduction
Model S6D102 E1 gear in the wheel hubs
Type Diesel Front axle HD axle with multi-disc self-locking
Power 103 kW/141 hp (DIN 70020/ISO 9249) differential, 25 % locking value
at engine speed 2,200 rpm Rear axle HD axle with multi-disc self-locking
differential, oscillating suspension,
Max. torque 566 Nm (DIN 70020)
25 % locking value
Number of cylinders 6
Oscillating 12° per side
Bore/stroke 102/120 mm
Tyres 20.5 R 25 / L-2, L-3
Displacement 5,900 cm³ 20.5 – 25 / L-2, L-3
Compression ratio 17.3 : 1 555/70 R 25 / L-2, L-3
Combustion principal Direct injection, turbocharged 17.5 R 25 / L-4, L-5
Two-circuit liquid cooling,
with thermostat control
Electrical system
Battery
24 volt
2 x 12 volt, 105 Ah
Steering system
Three-phase alternator 50 A Type Hydrostatic
Air filter type HD dry air filter System Articulated steering
Centre pivot adjustment free
Steering angle 40° per side
Steering pump
operating pressure 190 bar
delivery capacity 110 l/min
Transmission Min. turning radius
outer edge, wheel 5.240 mm
Type Fully automatic Full Powershift outer edge, standard bucket 5.950 mm
transmission with optimized Emergency steering system Via additional pump
efficiency and “kick down”
Converter type W300 02G0 4075
Conversion ratio 2.549 : 1 Brakes
Operating brake Hydraulic pump energy storage
brake system, oil-bath multi-disc
brake in the wheel hubs
Travel speeds (all-wheel brake)
Hand brake Disk brake at transmission
Forward 1st gear 0- 7,1 km/h output
2nd gear 0- 13,8 km/h
3rd gear 0- 25,2 km/h

Reverse
4th gear
1st gear
0-
0-
40,2 km/h
8,0 km/h
Standard equipment
2nd gear 0- 14,9 km/h
3rd gear 0- 26,0 km/h Sound-insulated high-comfort driver’s cab with integrated (ROPS/FOPS)
• air-conditioning (cfc free) • openable windows • 2 halogen front
headlights • 2 halogen working lights each at front and rear • vanda-
lism protection • AM/FM cassette player • fully automatic transmission
with additional kick down device • 2-lever hydraulic actuation • service
brake wet disc type • Torque proportioning differentials in front and
Filling capacities rear axle • emergency steering system • electronic checking system
(EDIMOS II) • Hydraulic quick-coupler attachment • 3 spool valve •
automatic digging angle adjustment (return to dig) 2-stage adjustable
Fuel 185 l • bucket lift kickout • 20.5 x 25 tyres (radial) • loader linkage parallel
Engine oil 16 l design with 2 lift- and 2 dump cylinder– sealed bearing points • inte-
Cooling system 56 l grated sound insulation • registered according to StVZO
Torque converter/ • fully adjustable air suspension seat with head rest • batteries 2 x 12 V
transmission power shift 21 l 105 Ah alternator 50 A starting motor 24 V 4.5 kW.
Front axle 25.5 l
The WA270PT-3 is equipped in accordance with safety regulations and
Rear axle 25.5 l
its emission values correspond to the regulations of the international
Operating hydraulics/brake system 120 l
standard ISO 6393 and the EC directive 95/27/EC, noise levels:
LwA = 106 dB(A), LpA = 75 dB(A).

Hydraulic system Options

Operating presure 210 bar load stabilisor (ALS) • back-up alarm • central lubricating system
Delivery capacity 175 l/min • special buckets • special tyres (e.g. rock, recycling, sand, clay etc.)
Loading times • tyre protecting chains • catalytic converter • exhaust filter • speed
lifting (full load) 5.0 sec. limit (20 km/h) • TURBO II pre-filter • multi-function lever for hydraulic
dumping 1.5 sec. system + transmission (MFL) • heatable seat • single-lever hydraulic
lowering 2.7 sec. actuation • Fire extinguisher • additional working lights • bio hydraulic
Automatic bucket lift kickout, automatic digging angle adjustment for oil • anti-theft lock • anti-corrosion kit • roof protection grid • trailer
bucket and fork changeable in cab. coupling with 7 pin socket .
 The advantages at a glance.
Hydraulically activated quickhitch
as standard assures high versatility
The 4-cylinder configuration and quick attachment change.
assures excellent visibility of
the front attachment.

Exterior parts are treated with

rust resistant undercoat and
strong top coat. High quality
paint assures good appearance.
6 cylinder KOMATSU low
emission engine. Already
conforms to the future EU
standard tomorrow.

The parallel lift assure high lifting

force and perfect parallelism.
2-mode (slow/fast mode) dumping
speed is available and provide
easy operation.

The ALS electronic system:

reduces vibrations and pro-
tects driver and machine
depending on the actual
speed (option).

A kick down switch on the boom lever

shifts from forward 2nd to 1st gear at a Compact dimensions and
touch and provides larger rim pull. small turning radius permits
working in confind spaces.

Low noise, fully automatic “High Efficiency” transmis-

sion with electric kick down device: floating rubber
Gull wing engine side covers including rear fender suspension – thus almost eliminating sound impact.
and rear radiator grill open fully at a touch. These
afford clean, easy and light maintenance.

• Air conditioning system assures • ALS reduces vibrations and protects • Wide selection of front attachments
always clean and the most comfort driver and machine. allows the machine to adapt to
in the cab. various applications.

KOMATSU HANOMAG: The best of both worlds. KOMATSU HANOMAG in Hanover. Besides the production of
The wheel loaders are the WA-3 series of the first integrated wheel loaders, the factory in Hanover is also specialised in the
products which have been jointly produced by KOMATSU and construction and design of axles and transmissions.

KOMATSU HANOMAG
Aktiengesellschaft

Hanomagstr. 9
30449 Hannover
Germany

Tel.: 0511/45 09-0

Fax: 0511/45 09-185
http://www.komatsuhanomag.de
http://www. komatsu.com

All data are non-binding and subject to changes. VESS073401 PT

The figures may deviate from the standard design. 07.01
Printed in Germany.