Scribd
Upload
253 views

AMF Control Relay

The document describes an AMF control relay that automates diesel generator sets. The relay is a solid state, compact electronic device that has built-in sensors for mains voltage, incoming delay timers, starting attempt timers, voltage sensors, counters, and logic control. It works on the diesel generator's starting battery and saves panel space and costs by reducing the need for internal wiring and separate power supplies. The relay provides reliable and easy control and monitoring of the automatic mains failure system.

Uploaded by

ladunni niad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
253 views

AMF Control Relay

The document describes an AMF control relay that automates diesel generator sets. The relay is a solid state, compact electronic device that has built-in sensors for mains voltage, incoming delay timers, starting attempt timers, voltage sensors, counters, and logic control. It works on the diesel generator's starting battery and saves panel space and costs by reducing the need for internal wiring and separate power supplies. The relay provides reliable and easy control and monitoring of the automatic mains failure system.

Uploaded by

ladunni niad
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AMF Control Relay

Function:
Power House AMF relay: is a solid state, compact
electronics device developed to make AMF panel reliable,
simple, and easy to operate. It has built in Mains voltage
Sensor, incoming delay timer, starting attempt timer with ON
delay and OFF delay, 3 Attempt and lock, DG voltage sensors,
counters, logic control etc. Incoming High Voltage supplies are
isolated by opto couplers and out put connections are through
electrotechnical relays. The relay does not require any
separate power supply. It works on DG set starting battery.

Application:
Automation of DG sets.

Specifications: Saves Panel Space-


Aux Supply :12/24 V DC from DG starting battery Reduces fabrication cost.
Sensing
Mains : 3 Phase 4 wire.
Dedicated system
A) Under Voltage 170 -200 V. (Adjustable) Reduces internal wiring
B) Single Phasing Enhances system
DG : 1 Ph. 2 Wire.
A) Starting signal withdrawal at 75 V. (Fixed) Reliability
B) Load Transfer 190 -210 (Adjustable)
Mains Incoming Delay
: 30 - 60 Sec. (Adjustable) Block Diagram:
Starting Signal A) On time 3-6 Sec (Adjustable)
B) Off time 3-6 Sec. (Adjustable) MAINS MAINS LOAD
V. SENSE Incoming ON
C) 3 attempt and Lock Delay Timer Mains
Ideal running : 30-60 Sec. (Adjustable) MAINS
Resum
Stop Solenoid Timer ption
: 30-60 Sec. (Adjustable)
Interlocking : Logically interlocked
Isolation A) Optical isolation for Mains Voltage
IDEAL RUNNING STOP SOLENOID
B) Optical isolation for DG Voltage PHASE FAILURE TIMER TIMER
C) Electro-mechnical Relays for out put OR
LOW VOLTAGE
Contact Ratings : 5 Amps
Terminals : PCB Mounted for 2.5 Sq mm wire.
Indications : A) Mains incoming voltage (each phase) Starting Signal STARTING STARTING
B) Starting attempt ON time Timer SIGNAL
COUNTER
ATTEMPT

C) Set fail to start & FAIL TO START


LOCK ALARM
D) DG set low voltage
E) Load ON DG DG LOAD
F) Load ON Mains V. SENSE ON
DG
G) Stop Solenoid Timer ON
Enclosure : Heavy duty Sheet Steel enclosure finished
with Powder coated.
Mounting : Panel (245 x 190 mm)

BAID POWER SERVICES P. LTD.


152, Block- B, Ground floor, Lake Town, Tel :25210322, Tel/Fax: 40678112
Email: [email protected], Web: www.indiapowerhouse.com

You might also like