measuring

•
Flap Flow Meter monitoring
for Liquids •
analysing

 Range:
0.5 - 3.5 … 200 - 1500 m3/h
 Accuracy: ± 2.0 of reading
 pmax: PN40, tmax: -40 … +300 °C
 Connection: wafer flange
DN 25 … 500
 Material: stainless steel,
Hastelloy C, PP, PTFE
 Option: limit contacts,
analogue output with HART® or
PROFIBUS-PA®, Counter

KOBOLD companies worldwide: KOBOLD Messring GmbH Model:

Nordring 22-24
ALGERIA, ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, TSK
01 / 08-2008

D-65719 Hofheim/Ts.
CHINA, COLUMBIA, CZECHIA, DOMINICAN REPUBLIC, EGYPT, FRANCE, GERMANY,  +49 (0) 61 92 2 99 - 0
GREAT BRITAIN, INDIA, INDONESIA, IRAN, ITALY, MALAYSIA, MEXICO, MOROCCO, Fax +49 (0) 61 92 2 33 98
NETHERLANDS, PERU, PHILIPPINES, POLAND, ROMANIA, SINGAPORE, SLOVAKIA, E-Mail: [email protected]
SPAIN, SWITZERLAND, THAILAND, TUNISIA, USA, VENEZUELA, VIETNAM Internet: www.kobold.com 1
Flap Flow Meter for Liquids Model: TSK

Description Technical details

The Kobold flap flowmeter type TSK is suitable for flow Sensor
measurement of liquid products in pipes. The special
Materials: 1.4404 (316 L) / 1.4571 (316 Ti)
advantage is that it can be used for all directions of flow.
(TSK-S)
It shows the current flow rate in volume or mass per unit
Steel / Stainless steel
in time. The meter’s design makes it ideal for processes
(TSK-C from DN80)
under difficult and adverse operating conditions. The
Hastelloy C-22 (TSK-H)
devices are available with additional electrical equipment
Polypropylene / Stainless steel
for process monitoring and control.
(TSK-H)
Polypropylene / Hastelloy C-22
(TSK-J)
Function
PTFE / Hastelloy C-22 (TSK-P)
If a medium flows with sufficient velocity through the other materials on request
horizontally or vertically mounted TSK fitting, the paddle will
Process connection: Sandwich acc. EN 1092,
swivel around the axle until the force of the medium and
ASME B16.5, DIN2512,
the opposing force of the paddle surface plus the spring
special connections on request
tension establish equilibrium. The angular position or the
position of equilibrium of the paddle in the measuring Nominal pressure: PN 40, ASME Cl150 / 300
compartment is the measure for the flow. The encapsulated (standard) (TSK-S/C/H)
ring-type permanent magnet at the end of the paddle axis PN 16, ASME Cl150 (standard)
transmits this position to the scale and the optional (TSK-K/J/P)
electronic evaluators through the magnet tracking indicator higher pressure rates optional
system. This happens safely and without packing glands.
Process temperature: -40 °C up to +300 °C
The flow rates shown on the scale only apply to the (TSK-S/C/H)
calibrated medium or to a medium with the same physical 0 °C up to +80 °C (TSK-K/J)
characteristics. -20 °C up to +125 °C (TSK-P)
Ambient temperature: -40 °C up to +80 °C
Additional advantages Ingress protection: IP 65 (EN60529)
 A large spectrum of wetted materials and linings Accuracy: Liquid:
± 2 % of reading
 Magneto-resistive signal transmission
± 1% of upper range value
 Special design for high temperature applications ± 0.2 % with transmitter (ES)

Applications Certification
 Control of cooling- and flushing processes Explosion protection: BVS 03 ATEX H/B 112
 Chemical industry CE-Marking: Pressure Equipment Directive
97/23/EC
 Water- and waste-water technology
 Power-plants
Display
 Maschinery-building
Materials: Aluminium (stove-enameled)
Stainless steel (as option)
Outputs: inductive switch
inductive switch in safety design
microswitch
others on request
Ambient temperature: -40 °C up to +80 °C
(without switch)
-40 °C up to +65 °C
(with switch)
01 / 08-2008

2 www.kobold.com No responsibility taken for errors;

subject to change without prior notice.
 Flap Flow Meter for Liquids Model: TSK

Technical details
Transmitter:
 ES with HART®-protocol
 ES with HART®-protocol and 2 NAMUR-switches
 ES with HART®-protocol and 1 NAMUR-switch /
1 pulse output
 ES with PROFIBUS-PA®
 ES with HART®-protocol and counter module

Power supply: 14 - 30 VDC

Output: passive, galvanically isolated
Currency: 4-20 mA
Binary 1 and 2: U i = 30 V, I i = 20mA, Pi = 100 mW
Input Binary: Counter reset
(only for ES with counter module)
Ambient temperature: -40 °C up to +70 °C
Ingress protection: IP 20 (EN60529)

Certification
Explosion protection: DMT 00 ATEX E 075
Type of protection: II 2G EEx ia IIC T6
CE-Marking: Explosion Protection Directive
94/9/EC
01 / 08-2008

No responsibility taken for errors; www.kobold.com 3

subject to change without prior notice.
Flap Flow Meter for Liquids Model: TSK

Order Details (Example: TSK-S 109C A1 U 6 V 00 S 1 0 0)

Model Process connection Range Flow direction Temperature class Seal
1… = flange Form C DIN 2501 m3/h water
2… = flange RF ASME
B16.5-2003
109C = DN25 PN40
203R = 1" Class 150 A1 = 0.5 - 3.5
223R = 1" Class 300
117C = DN40 PN40 B1 = 1.5 - 6
205R = 1 1/2" Class 150 B2 = 1.5 - 10
225R = 1 1/2" Class 300 B3 = 3 - 15
121C = DN50 PN40
C1 = 1.5 - 10
206R = 2" Class 150
TSK-S = C2 = 3 - 30
226R = 2" Class 300
Armatur stainless steel,
126C = DN65 PN40 D1 = 1.5 - 14
built-in parts stainless steel 6 2) = max. 80 °C, Magnet
207R = 2 1/2" Class 150 D2 = 4 - 30
encapsulation PVDF
227R = 2 1/2" Class 300 D3 = 6 - 50
TSK-H =
131C = DN80 PN40
Armatur and built-in parts E1 = 4 - 24 5 = max. 100 °C, Magnet
208R = 3" Class 150
Hastelloy C-22 E2 = 10 - 60 U = from the bottom to encapsulation PVDF
228R = 3" Class 300
the top V = FPM
2) 135C = DN100 PN16
TSK-K = F1 = 6 - 40 4 = max. 135 °C, Magnet (max. 150 °C)
210R = 4" Class 150
Armatur PP, F2 = 8 - 80 O = from the top to encapsulation PVDF,
230R = 4" Class 300
built-in parts stainless steel the bottom forward advanced display F = FEP
140C = DN125 PN16
G1 = 10 - 60 (max. 200 °C)
2) 211R = 5" Class 150
TSK-J = G2 = 20 - 120 L = from the left to 3 = max. 200 °C, Magnet
231R = 5" Class 300
Armatur PP, built-in parts the right encapsulation Stainless S = Stainless
145C = DN150 PN16
Hastelloy C-22 H1 = 15 - 100 steel, forward advanced steel
212R = 6" Class 150
H2 = 30 - 200 R = from the right to display (max. 300 °C)
3) 232R = 6" Class 300
TSK-P = the left
150C = DN200 PN16 J1 = 25 - 160
Armatur PTFE, built-in 2 = max. 300 °C, Magnet
J2 = 50 - 275
parts Hastelloy C-22 213R = 8" Class 150 encapsulation Stainless
J3 = 60 - 400
steel, forward advanced
155C = DN250 PN10 K1 = 50 - 200
TSK-C 1) = display
K2 = 75 - 400
Armatur steel, 214R = 10" Class 150
K3 = 80 - 500
built-in parts stainless steel
162C = DN300 PN10 L1 = 80 - 400
215R = 12" Class 150 L2 = 100 - 600
169C = DN350 PN10 M1 = 120 - 700
216R = 14" Class 150 M2 = 150 - 1000
175C = DN400 PN10 N1 = 150 - 800
217R = 16" Class 150 N2 = 200 - 1300
180C = DN500 PN10 P1 = 200 - 1300
219R = 20" Class 150 P2 = 200 - 1500
1) only available for Nominal diameter DN80 / 3"
2) Model TSK-K and TSK-J (Armatur PP) only max. 80 °C possible !
3) TSK-P max. 125 °C

Special seal Certificate Display Scale Electr. outputs Accessories

0 = without
1 = 1x inductive limit contact
0 = without S = Standard 2 = 2x inductive limit contacts
1 = with 0 = without (Aluminium) 6 = electr. transmitter ES,
1 = Certificate of compliance 0 = without
(FPM, max. 150 °C) E = Stainless steel 1 = %-Scale (Water) HART ® Protocol, 4-20 mA, EEx ia
with the order 2.1 X = with
Protection of incoming display IP 66 2 = Range-scale (Water) 7 = electr. transmitter ES,
2 = Test report 2.2 (see separate
solids (f. ex. metal T = Standard 4 = %-Scale (Media) HART® Protocol, 4-20 mA,
B = Inspection certificate 3.1 specifications)
chippings) in the (Aluminium) 5 = Range-scale (Media) EEx ia, 2x Namur contacts
C = Inspection certificate 3.2
transmission chamber with pressure 9 = electr. transmitter ES,
compensation PROFIBUS-PA ® , EEx ia
I = 4-20 mA with HART ®
and counter module
01 / 08-2008

4 www.kobold.com No responsibility taken for errors;

subject to change without prior notice.
 Flap Flow Meter for Liquids Model: TSK

Dimensions
Size Nominal pressure (standard) L [mm] D [mm]
DIN/EN ASME PN class Display Display DIN-/EN- ASME-flange h
aluminium stainless steel flange [mm]
50 2" 40 300 272 261 102 92,1 17
65 2 1/2" 40 300 272 261 122 102 21 (ASME = 17)
80 3" 40 300 272 261 138 127 31
100 4" 16 150 272 261 158 158 36
125 5" 16 150 352 341 186 186 45
150 6" 16 150 352 341 212 212 53
200 8" 16 150 352 341 268 268 80
250 10" 16 150 352 341 320 320 90
300 12" 10 150 372 361 370 381 100
350 14" 10 150 442 431 430 413 100
400 16" 10 150 452 441 482 470 130
500 20" 10 150 492 481 585 585 130

Design with standard display for horizontal flow

01 / 08-2008

No responsibility taken for errors; www.kobold.com 5

subject to change without prior notice.
Flap Flow Meter for Liquids Model: TSK

Design with stainless steel display for horizontal flow

01 / 08-2008

6 www.kobold.com No responsibility taken for errors;

subject to change without prior notice.
 Flap Flow Meter for Liquids Model: TSK

Design for vertical flow

01 / 08-2008

No responsibility taken for errors; www.kobold.com 7

subject to change without prior notice.