Scribd
Upload
1K views

Draft Offshore Checklist

This document is an HSE loading inspection checklist used to inspect containers and their loads prior to transport. It contains 8 sections checking items like container integrity, lifting equipment certification, load securing, and tool conditions. Inspectors verify that container contents match manifests, lifting gear has valid test certificates and no damage, loads are properly arranged and secured, and tools are in good repair and safely stored before containers are approved for transport.

Uploaded by

mohamad nur saufi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views

Draft Offshore Checklist

This document is an HSE loading inspection checklist used to inspect containers and their loads prior to transport. It contains 8 sections checking items like container integrity, lifting equipment certification, load securing, and tool conditions. Inspectors verify that container contents match manifests, lifting gear has valid test certificates and no damage, loads are properly arranged and secured, and tools are in good repair and safely stored before containers are approved for transport.

Uploaded by

mohamad nur saufi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

HSE LOADING INSPECTION CHECKLIST

Base Location :
Project :
Division :

No Items Inspected Remarks


A OPEN/CLOSE CONTAINER YES NO N/A
1 Are manifest against container’s contents correct?
2 Is a copy of test certificates available and valid?
3 Is SWL labeled?
4 Loaded items are within the weight limit against manifest certificates.
5 Has the container been check for physical damage/corrosion (including
floor, forklift pockets, front/back/right/left sides, ceiling/roof, doors
and bottom support under carriage the container) .
6 Has the container been check for loose object on
top/inside/outside/forklift channel?
7 Are door hinges, handles and locking device in good condition.
8 Are doors locked and secured correctly.
B SLINGS/WIRE ROPE YES NO N/A
1 Is inspection date valid throughout the project duration?
2 Is the correct colour coding applied?
3 Is there any physical damage (kinks/bird coging/broken
wire/corrosion)?
4 Is sling/wire rope capacity more than the container load?
5 TEST CERT?
C SHACKLES YES NO N/A
1 Is the correct SWL and ID number match with the test certs?
2 Is there any physical damage?
3 Is the correct colour coding applied?
4 Is the size of safety pins and nuts used match with the shackle size?
5 Is the right size of cotter pin used?
6 Is cotter pin installed fully bent?
7 Are the test certificates available and valid?
D PAD EYE YES NO N/A
1 Is the correct SWL and ID number match with the test certs?
2 Is there any physical damage?
3 Is the correct colour coding applied?
4 Are the test certificates available and valid?
E CHEMICAL YES NO N/A
1 Are all the chemicals stored and secured properly?
2 Are the updated chemical Safety Data Sheet(SDS) attached?
3 Are the chemicals labeled properly?
F LOAD YES NO N/A
1 Are the loads in open top container secured properly?
2 Are palletized materials safely and correctly stacked?
3 Are safety net secured (if applicable)
4 Are all the load arranged properly for easy handling?
G PRESSURE TEST EQUIPMENT YES NO N/A
1 Is the calibration cert valid and available?
2 Visually inspected to ensure no leaking?
3 Is the fitting rating as per testing requirement?
H HAND TOOL YES NO N/A
1 Ensure there are no homemade tools in toolkit
2 Are the handles in good condition?
3 Are the handles firmly attached to the heads?
4 Are the heads in good condition?( no mushrooming, chisels sharp)
5 Are the tools packed and stored properly?
HSE LOADING INSPECTION CHECKLIST

FUNCTION 3RD PARTY REPRESENTATIVE CLIENT REPRESENTATIVE


NAME

COMPANY

POSITION

DATE

SIGNATURE

You might also like