Scribd
Upload
169 views1 page

4 Didacta Italia (Ic51d)

The document describes four different experimental setups for studying gas-liquid processes: 1) A setup with two interconnected vessels and sensors to study the properties of air as a perfect gas under different pressure and temperature conditions. 2) A packed column to study gas absorption by flowing a gas into a liquid in counter-current flow. 3) A wetted wall column to study oxygen absorption from air into a deoxygenated water flow and understand mass transfer principles. 4) A fixed bed setup to study gas adsorption and desorption processes by realizing full process cycles and measuring characteristic parameters.

Uploaded by

Eber Colque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
169 views1 page

4 Didacta Italia (Ic51d)

The document describes four different experimental setups for studying gas-liquid processes: 1) A setup with two interconnected vessels and sensors to study the properties of air as a perfect gas under different pressure and temperature conditions. 2) A packed column to study gas absorption by flowing a gas into a liquid in counter-current flow. 3) A wetted wall column to study oxygen absorption from air into a deoxygenated water flow and understand mass transfer principles. 4) A fixed bed setup to study gas adsorption and desorption processes by realizing full process cycles and measuring characteristic parameters.

Uploaded by

Eber Colque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

IC124D Expansion Processes of a Perfect Gas

Chemical Engineering
The unit introduces to a wide range of thermodynamic experiments; air is
the working fluid and is considered as a perfect gas. It is composed of two
interconnected vessels made of transparent plastic; a set of valves and an air
pump enable to perform tests in pressurized and depressurised conditions.
The changes in the properties of air are monitored and measured by pressure
and temperature sensors.

IC131D Plant for the study of the gas absorption process


The study unit allows to study the absorption process by means of a packed
column operating in counter-current. The absorption consists of melting a gas
into a liquid. This operation allows to separate one or more components of a
gaseous mixture and to produce a liquid containing a desired quantity of a gas.

IC134D Wetted Wall Gas Absorption Column


The unit studies how a deoxygenated water flow rate absorbs
oxygen from air by using a wetted wall absorption column. It
has been designed to allow the student to understand the basic
principles of the chemical-physical process called absorption; these
concepts are very important to learn how to calculate gas/liquid
mass transfer coefficients.

IC51D Fixed Bed Plant for gas adsorption and de-adsorption


Unit for the development of gas adsorption and deadsorption processes.
It may check all the process characteristic parameters by realizing work
complete cycles. Made of stainless steel and borosilicate glass. Supplied with
an adsorption column with a stainless steel coil connected to an external
refrigeration or heating circuit according to the process to be realized.

38

You might also like