Scribd
Upload
33 views1 page

Sub Pipe Load

The document provides specifications for designing a beam to support a sewage pipe, including the pipe's external diameter of 738mm, thickness of 12mm, height of 2m, and weight per meter of 1.11 kN/m. It also lists the density of sewage flowing through the pipe as 11 kN/m3, and calculates the total point load on the beam from the pipe's self weight, sewage weight including 25% impact, fixture weight, and concrete lining weight as approximately 15 kN.

Uploaded by

Nikhil Poriya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
33 views1 page

Sub Pipe Load

The document provides specifications for designing a beam to support a sewage pipe, including the pipe's external diameter of 738mm, thickness of 12mm, height of 2m, and weight per meter of 1.11 kN/m. It also lists the density of sewage flowing through the pipe as 11 kN/m3, and calculates the total point load on the beam from the pipe's self weight, sewage weight including 25% impact, fixture weight, and concrete lining weight as approximately 15 kN.

Uploaded by

Nikhil Poriya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Beam(pipe supporting) Design

1. INPUT
PIPE Pipe:
Ext. Dia. : 738 mm Thk. Of inner CC lining :
Thk. : 12 mm 0 mm
Height : 2m Thk. Of outer CC lining :
2m
Wt. per m: 1.110729 kN/m 0 mm
BEAM No. of pipes held by
a beam : 1

Density of Sewage flowing through pipe: 11 kN/m3


Wt. per m: 4.55361 kN/m

Point load Due to Pipe :


a) Self weight of pipe : 2.221 kN
b) weight of sewage : 11.384 kN (Including 25% Impact)
c) weight of Fixture : 1.400 kN(Approx.)
d) weight of CC lining : 0.000 kN
Total load : 15.005 kN
Approx. 15.0 kN

You might also like