SHENZHEN VISUAL LUMEN CO.

,LTD

Manual for V6 series of product

-V6 system
V1.0
Contents
1. Brief introduction.......................................................................................................... 2

2. The principle of system constitution............................................................................. 2

3.The application of system.............................................................................................. 3

4. Display performance..................................................................................................... 4

5. System constitution....................................................................................................... 4

5.1 LED Panel controller.............................................................................................4

5.2 Applied environment.............................................................................................5

5.3 Configuration list...................................................................................................6

6. LED Panel system......................................................................................................... 7

6.1 Hardware constitution........................................................................................... 7

6.2 Connection and use............................................................................................... 7

6.3 Indicator troubleshooting...................................................................................... 7

7. Application cases...........................................................................................................8

7.1 Panel application................................................................................................... 8

7.2 9712 lamp strap application................................................................................ 13

Safety instructions

1
_ To avoid the accidents of fire or electric shock, please do not expose the product in

rain (water) or damp environment.

_ Please place the product in well-ventilated area so as to avoid overheating.

_ To avoid electric shock, please use the power supply with three-phase plugs so as to

ensure the reliable grounding.

_ To prevent burning out the product from shorted, please do not put the product

directly on electro-conductive materials. If necessary, please use insulating substances.

Please do not put electro-conductive materials on the product directly.

_ Before using the product, please check if the local voltage and power supply voltage

are consistent with the requirements of this system, and if the anode and cathode

definition of power supply are consistent with that of system plate.

_ Please use soft cloths dipped with little neutral detergent to clean the cabinet, and do

not use any sand paper, polishing powder or solutions such as alcohol and gasoline.

_ Please do not tear or alter the label in the product for the convenience of the product

maintenance afterward.

_ If the product comes into trouble, please contact professionals for maintenance, and

do not dismantle the product privately.

1. Brief introduction

The S-PC-02 online video control system is commonly used LED as a Panel control

system platform. Connecting with the computer, the system can accomplish the LED

panel control .It supports two-color or three-color real pixel, virtual pixel screens which

are based on 9702X, 9705X, 9712 chips with good versatility, reliability and excellent

display performance, and are easy to maintenance.

2
2. The principle of system constitution

onsistency: the system conforms to the principle of opening. It has good flexibility,
Consistency

extendibility, compatibility and transplantability

Advance: it can make the system program easy, facilitate the connection, improve the
Advance

display effect and cut the cost; it is at the leading position in this area now.

Reliability: the system can work for a long time stably, conforms to our country and
Reliability

the international standard on quality and reliability.

Economical: performance-to-price ratio of the system can achieve the most superior,
Economical

and it will be the best choice to users

3. The application of system

3.The

the longest
transmission the maximal
screen application transmission
medium resolution
distance

3
 support line-control and

array-control to light strip which

based on the 9712 chip support

line-control to board unit which no more than

(UTP5) 1024*768
based on the 9702X chip support 100M with UTP5

line-control, array-control to
board unit which based on the

9705X chip

4. Display performance

support all kinds of virtual pixel and real pixel display screen which based on

9702X, 9705X, 9712 chips

support the screen resolution of 1024×768

support the Gray display of 256 levels for R,G and B colors

the frame frequency of system is 60Hz；

the transmission distance can reach up to 100M

support the capability control of CF card

5. System constitution

5.1 LED Panel controller

4
 Front view and back view

Interface definition

5.2 Applied environment

LED panel controller+ scanning controller+ board units

5
5.33 Configuration list
5.

configuration name number mark

online display controller one

standard
LED panel
configuration USB cable one
controller
Power cord one

scanning controller/ data according to the Buy from us

divider number of screen

related fitting UTP5 several provide for oneself

USB several provide for oneself

Switch power several provide for oneself

Note: standard shipment only comprises of one panel controller, users can subscribe for

scan controller (data divider) from us, according to screen and light strip’s demand.

6
6. LED Panel system

6.1 Hardware constitution

The system consists of computer, scanning controller (date divider) and online LED

Panel controller.

6.2 Connection and use

Use DVI cable to connect panel controller with computer DVI interface, use one

USE cable to connect panel controller with computer USB interface, use one UTP5 to

connect the vertical date output port with

the date input port of scanning controller (data divider).

Note: must connect the vertical date output port of LED Panel controller.

Note: the way of connection from scanning controller to LED screen is decided by

concrete solutions.

6.3 Indicator troubleshooting

Indicator color status problem

power green on normal

7
 on normal
status green
off abnormal

off normal

error red DVI cable is

flash
wrong

7. Application cases

7.1 Panel application

7.1.1 Scanning Controller

7.1.2 Instructions for interface of Scanning Controller

_COM: not used temporarily.

_ INPUT: Data input of scanning controller.

8
_ H-LINK: the horizontal data output of scanning controller is

connected with the input of the next scanning board in the horizontal concatenation

_ V-LINK: the vertical data output of scanning controller is connected with the

input of the next scanning board in the vertical concatenation.

_ PORT1～PORT8: The output port of scanning controller is connected with the

cascading input of screen unit board. In these ports, the PORT1 controls the top unit

board and the PORT 8 controls the bottom unit board.

7.1.3 Sketch map for physical dimension

7.1.3 Sketch map for physical dimension

9
 10

7.1.4 Instructions for indicator of scanning controller

7.1.5 Connection cable

Screen front view

10
Application instruction

Supported types of unit board:

The system supports virtual pixel and real pixel unit boards with all kinds of scanning

modes based on the 9702/97021/97022A chips of Us . For detailed design rules of unit

board, please see the Design Manual for Schematic Diagram of 9702X Unit Board and

the Deign Rules for PCB Layout of 9702X System Unit Board.

EEPROM configuration:

_ By means of adjusting the content of EEPROM file in the scanning controller,

different types of unit boards can be supported, and the adjusting on the pixel number

of scanning board can be realized.

_ Each scanning controller can supply 8 output control interfaces of unit board at most,

and each control interface can support 1024 pixels.

_ For the preparation and generation methods of EEPROM files, please see the

Instructions for Filling EEPROM Files and the Instructions for Generation Program of

EEPROM for more details.

11
Calculation of scanning controller number Scanning controller number=rounded

number of the line number of unit board/output port number used in each scanning

controller.

Application cases

Case 1: If one 512×384 (array × line) virtual pixel screen will be made in a certain

project by adopting the 2197 unit board with the characteristic of 64×32 (array × line)

virtual points, how many scanning controllers need to be used in the V6 system?

Answer: The system is adopted with line control. The unit board number of screen is

384÷32＝12 (lines) So the number of scanning controller is the rounded number of

[12÷8] =2 (pieces) For the two scanning controllers, the first one can be selected to

control 8 lines of unit boards and the second one can control 4 lines of unit boards.

And either can be selected to control 6 lines of unit boards respectively.

Case 2: If one 512×384 (array × line) real pixel screen will be made in acertain project

by adopting the 2197 unit board with the characteristicof 64×32 (array × line) virtual

points, how many scanning controllers willneed to be used in the V6 system?Answer:

The system is adopted with line control.The unit board number of screen is 384÷16＝

24 (lines)So the number of scanning board is 24÷8＝3 (pieces)It can also be selected to

use 3 scanning controllers, each of whichcontrols 8 lines of unit boards.

7.2 9712 lamp strap application

7.2.1 Data divider

12
 Front view and back view of data divider

7.2.2 Instructions for interface of data distributor

_COM: for communication between data divider and PC. _INPUT: Data input of date

divider _H-LINK: the horizontal data output of date divider is connected

with the input of the next date divider in the horizontal concatenation _V-LINK: the

vertical data output of date divider is connected with the input of the next date

divider in the vertical concatenation.

_PORT1～PORT8: The output port of data divider is connected with input of LED

lighting or the left. In these ports, the PORT1 controls the top line lighting or the left

array lighting and the PORT 8 controls the bottom lighting or the top array lighting.

Note: using S-PF-01 and S-HUB-01 together can solve the long cable problem. The

longest control distance is 100M. Note: I. connect the PS-FP-02 with lighting right, the

length is no more than 1.5M, the preparation and generation of the UTP5,please refer to

the appendix 1

II. instructions as follows: Orange /White－CK；Green/White－DATA；Blue/ White

－LATCH；Brown/ White－OE；Orange ,Green, Blue ,Brown－GND.

13
7.2.3 Sketch map for physical dimension

14
7.2.4 Instructions for indicator of data divider

Technical support
support:

Tel: +86-755-28704020 Mobile: +86-13802700271

Web: www.visuallumen.com Email: [email protected]
Online support: Msn: [email protected] Skype: leddisplayme Yahoo: leddisplayme
Add: Dawang Industrial Park, Shiyan, Bao'an District, Shenzhen, Guangdong, China

15