Scribd
Upload
329 views

Check List - Basic Engineering Package (BEP) Information Input/ Review

The document outlines a checklist for reviewing a basic engineering package (BEP). The checklist includes items related to process information, mechanical engineering, piping design, general project information, and requirements for reviewing key parts of the BEP, including P&I diagrams, equipment data sheets, piping design philosophies, plot plans, and equipment layouts. The goal is to ensure the BEP provides essential design information and meets necessary requirements.

Uploaded by

ssgentis
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
329 views

Check List - Basic Engineering Package (BEP) Information Input/ Review

The document outlines a checklist for reviewing a basic engineering package (BEP). The checklist includes items related to process information, mechanical engineering, piping design, general project information, and requirements for reviewing key parts of the BEP, including P&I diagrams, equipment data sheets, piping design philosophies, plot plans, and equipment layouts. The goal is to ensure the BEP provides essential design information and meets necessary requirements.

Uploaded by

ssgentis
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Check List – Basic Engineering Package (BEP)

Information Input/ Review


0

Sr. No. List

BASIC / EXTENDED BASIC ENGINEERING PACKAGE CONTENT LIST (FROM PIPING REQUIREMENT)

A PROCESS INFORMATION

1. Process Description

2. Process and Utility Flow Diagram

3. Process and Utility P & I Diagram

4. Utility Distribution Diagram

5. Minimum Equipment elevation summary or same information in different form

6. Equipment Process Datasheet

7. Process Critical line List

8. Hazardous Area Classification drawing

B MECHANICAL

1. Equipment Engineering Datasheet

2. Package equipment vendor scope of work and tie in list

3. Acceptable equipment external nozzle load

C PIPING DESIGN

1. Preliminary plot plan

2. Preliminary Equipment Layout

3. Preliminary piping material specification or material selection criteria

4. Line List with process conditions

5. Special design requirements if any

6. Piping Design Philosophy


7. Instrument Process Hook up requirement

Sr. No. List

1. Stress analysis/ Support design guidelines/ standards

2. 3D design criteria

D GENERAL

1. Project Description

2. Project Design Basis

3. Site Condition

4. List of Design codes and standards

5. Fire Protection philosophy and safety requirement

6. Project schedule

7. Project procedure if any

8. Client’s standards if any

9. List of statutory regulations applicable

10. Drainage Philosophy and Requirement

REVIEW REQUIREMENTS OF BASIC ENGINEERING PACKAGE

A PROCESS AND UTILITY P & I DIAGRAM

1. Legend sheet with information on line numbering system, valve identification system, SM
numbering, Instrument numbering, Process specific requirement, Instrument process hook up
requirement etc

2. All lines are numbered. Line no. to contain, Size of pipe, Fluid code, Line sequence no., Piping
material specification, Insulation/ Painting/ Heat tracing/ Jacketing requirement, Area no. if any as
minimum.

3. Valve and SM identification in the form of symbol or tag no.

4. Instrument tag no.

5. Equipment nozzle identification in terms of nozzle no. or tie in point no.

6. Identification of proprietary package battery limit

7. Specific requirement such as slope, spool, specification break, line routing criteria, gravity drain,
barometric leg requirement, Valve/ Instrument location criteria etc.
8. Line continuation to other P & I D properly marked

9. Applicable notes

10. Minimum equipment elevation requirement

11. Brief equipment specification

12. Insulation requirement on equipment

13. Process vents and drains

14. Utility station requirements

B EQUIPMENT PD SHEET/ ENGIEERING DATASHEET

1. Operating and design conditions

2. Dimensional data

3. Support type

4. All major nozzles located and elevation/ projection defined

5. Maintenance requirement if any

6. Insulation thickness

C PIPING DESIGN PHILOSOPHY IF ANY

D PROJECT DESIGN BASIS

E STRESS and SUPPORT DESIGN PHILOSOPHY IF ANY

F 3 D DESIGN PHILOSOPHY IF ANY

G LINE LIST FOR AVAILABILITY OF DATA

Sr. No. List

F PLOT PLAN

1. Functional and Process Point of view

2. Man and Material movement point of view

3. Local statutory requirement point of view

4. Space management point of view for better utilisation of space

5. Hazard point of view – Hazardous area, Emission, Venting, Flaring etc.


H EQUIPMENT LAYOUT

1. Functional and Process Point of view

2. Man and Material movement point of view

3. Local statutory requirement point of view

4. Space management point of view for better utilisation of space

5. Hazard point of view – Hazardous area, Emission, Venting, Flaring etc.

6. Access, Operation and Maintenance point of view

7. Hazardous area classification

8. Safety

You might also like