TM

ISO 9001:2008 and AD2000 Merkblatt WO Certified Company

Engineering of Steel
 TM

Company Profile
Vision:
We aspire to be the most trusted and preferred supplier of
value added steel with world class quality of products and
services.

Mission:
Jagdamba is committed to promote integrated responsible
behavior and value for social and environmental well-being.
Continuous improvement focused on the sustainable
development of the business.

Introduction:
Jay Jagdamba Profile Engineering Products Limited (formerly
known as Shree Jay Jagdamba Stainless Steel Limited) is
India’s one of the largest long product manufacturers,
powered by advanced know-how & technical expertise, we
are well placed to meet the stringent requirements of our
valuable customers. Our specialised team concentrates on the
research and development activities to maintain our position
of being the finest in the industry.

JAGDAMBA is an ISO 14001: 2004 & 9001: 2008, PED ADW &
AD2000 MERKBLATT WO certified company, manufacturing
Stainless Steel, Alloy Steel, Carbon Steel, Duplex Steel &
Precipitation Hardening Steel in Billets, Ingots, Hot Rolled,
Bright Round, Hex, Square, Threaded, Flat, Angle Bars &
Flanges with complete art of manufacturing with integrated
in-house Melting, Rolling, Casting, Annealing & Heat
Treatment facilities. Our total production capacity is 80,000
MT/year.

JAGDAMBA pursues the highest quality standards in its

products and services. Striving for increasingly better quality
is an essential part of our company’s life, viewed in relation to
productive excellence, customer satisfaction and safety.
Jagdamba is committed to meeting the requirements of its
Quality Management System, taking practical steps to
improve the system and ensuring that its staff, at all levels,
understands its content and thereby implementing it.

Jagdamba is capable of providing complete range of steel

solution with philosophy of Source, Supply and Service. The
foundation of our business heritage continues to be based on
quality, customer service and performance.

TM

Certification

ISO 9001:2008 PED ISO 14001:2004 NABL CE

 CONTINUOUS CAST BILLETS / BLOOMS
Size Type Wt/Mtr
80 mm x 80 mm Square 45
100 mm x 100 mm Square 75
120 mm x 120 mm Square 113
140 mm x 140 mm Square 152
160 mm x 160 mm Square 200
200 mm x 200 mm Square 314
Supply • Length up to 9 meter • Saw end cuts
Condition • Spot grind or fully grind condition (as per request)
• Suitable for Forging, Re-rolling, Ring Rolling & Up-setting
• Marked with Heat Number, Grade & Size • Standard - ASTM, ASME, EN, DIN
• Free from radioactive elements & mercury, lead contamination

FORGING QUALITY INGOTS

Size Range
With a wide range of Stainless and Alloy Steel grades, we offer variety of ingots in weight up
to 22 M.T. in square, octagonal and round shapes as following:
Ingot Size (In Inches) Shape of Ingot Ingot Weight (In Kilograms)
8" X 9" X 52" Square 500
9” X 11" X 52" Square 740
11" X 14" X 52" Square 1050
14" X 17" X 72" Square 2400
16" X 20" X 55" Square 2500
20" X 24" X 72" Square 4900
27" X 30" X 62" Polygonal 5500
400 DIA X 2.5 METER Round 2500
500 DIA X 2.5 METER Round 3900
600 DIA X 2.5 METER Round 5600
Supply • Spot Grinded or Fully Grinded Condition • Cropped Ends
Condition • Free from surface defects or cracks • Ingots are supplied with smooth ends
• 100% tested through handheld spectrometer
• Every piece is marked with heat number, grade, size and weight
• Free from radioactive elements & mercury, lead contamination

HOT ROLLED ROUND CORNERED SQUARES (RCS)

Size 35mm, 40mm, 45mm, 50mm, 63mm, 75mm, 85mm, 100mm, 120mm
Supply • Length up to 8 Meters • Hot Rolled ( Black ) Surface
Condition • 100% Ultrasonically tested • Spot grinded or fully grinded surface
• Free of surface defects/crac • Cold Sawable
• Smooth ends without sharp edges
• 100% Material identity tested through handheld Spectrometer
• Free from radioactive elements & mercury, lead contamination
HOT ROLLED ROUND BARS
Size 16 mm - 120 mm
Supply • Hot Rolled (Black) Surface • 100% Ultrasonically Tested
Condition • Spotgrinded • Length up to 8 Meters
• Heat Treatment - Soft Annealing, Solution Annealing,
Oil & Water Quenching, Tempered & Normalized
• Cold Sawable
• 100% material identity tested through handheld spectrometer
• Free from radioactive elements & mercury, lead contamination

WIRE ROD (HRAP)

Grades 303, 304, 304L, 316, 316L, 410, 416, 420, 430F, 430L
Size 5.5mm to 14 mm (diameter)
Tolerance As per EN 10060
Surface Defect 1% of Diameter
Coil Weight 500-1000 kgs
Packing HDPE Wrapped coils 500 to 1000 kgs
Heat Treatment Solution Annealing for Austentic Grades,
Normal Annealing for Martenisitic Grades
Surface Treatment Hot Rolled or Hot Rolled Annealed and
Pickled (with or without coating)
 BRIGHT ROUND BAR
Size Range 3 mm to 120 mm (1/8” - 4-3/4”)
Supply • Cold Drawn, Centreless Ground, Peeled & Polished.
Condition • Rough Peeled or Smooth Turned bars.
• Surface finish 0.5 µmm to 1.5µmm max
• Straightness upt 0.5mm/ mtr to 1mm /mtr. 240,400,600 Grit Belt Polish
Heat Treatment Soft Annealing, Solution Annealing, Oil & Water Quenching, Hardening &
Tempering & Normalizing.
Bars End Finish Free from Burs ,smooth saw cut, one end OR both end chamfered with
45 deg.
Specifications As per EN, DIN, JIS, ASTM, BS, ASME, GHOST, AISI/Nace MRO175.
Grade AISI 201, 202, 301, 302, 303, 304, 304L, 309, 310, 316, 316L, 316Ti,
321, 347, 410, 416, 420, 430, 430F, 431, 630, 15-5PH, 17-4PH, 1.4435,
317L, F51, F60, 2205
Rough Turned tol. DIN 1013
Tolerance h8, h9, h11, k11, k12, k13

SQUARE & HEXAGONAL BRIGHT BARS

Square Size Range 5 mm to 70 mm
Hex Size Range 5 mm to 50 mm
Length 3 to 6 Meters
Tolerances h11, h12, h13
Surface Finish Cold Drawn, Shot Blast & Drawn, 240 Grit Belt Polished
Heat Treatment Annealed & Solution Annealed,
Bars End Finish Free from Burs, Smooth Saw Cut, One End or both end
chamfered with 45 deg.

STAINLESS STEEL THREADED BARS

Applications : Ground Anchors, Resin Anchors, Rock Bolts,
Tie Bars, Roof and Hanger Bolts.
Condition Cold Drawn, Threading
Grades 304, 304L, 316, 316L, B8, B8M, A2, A4
Diameter (Size) Metric M6 to M48, Inches - 1/4’’ to 2’’
Threading Method Thread Rolling
Thread Condition Fully Threaded
Thread Type Class-1 & Class-2 ( Low and High Tensile Threaded Rod)
Length 2/3/4 meter(6/12ft )
Length Tolerance -0 / +200 mm (-0”/+ 8” )

STAINLESS STEEL PRECISION BARS

Applications : Piston Rods, Pump Shafts, Boat Shafts, Cylinder Shafts,
Precision Machined Parts, Automotive Components & Others.

Condition Cold Drawn, Centreless Peeled, Centresless Ground &

Ground & Polished Polished

Grades 303, 304, 304L, 316, 316L, 410, 416, 420, 430F, 431, 630 (17-4 PH) & others
Diameter (Size) 6mm to 25mm (1/4” to 1”) 16mm to 85mm (5/8” to 3-1/4”)
Surface Finish Up to 20 RMS Max. Up to 20 RMS Max.
Up to 0.5µmm max. Up to 0.5µmm max.
Diameter Tolerance h7, h8, f7, f8 h7, h8, f7, f8
Half of ASTM A484 Half of ASTM A484
Straightness 0.5 mm per meter TIR (0.0015 inch per feet)
Out of Roundness Half of Diameter Tolerence Half of Diameter Tolerence
Length 3 upto 7 meter (12 upto 22 feet) 3 upto 7 meter (12 upto 22 feet)
Length Tolerance -0/+50mm or +20mm or +10mm -0/+50mm or +20mm or +10mm
-0/+2" or 1” or 1/2” -0/+2" or 1” or 1/2”
Heat Treatment Annealed/Quench & Temepered Annealed/Quench & Temepered
HRAP EQUAL ANGLES
Size Range
Size (mm) Thickness (mm) Size (Inches) Thickness (Inches)
20 3, 4, 5, 6 3/4" 1/8, 3/16, 1/4
25 3, 4, 5, 6 1" 1/8, 3/16, 1/4
30 3, 4, 5, 6 1-1/8" 1/8, 3/16, 1/4
35 3, 4, 5, 6 1-3/8" 1/8, 3/16, 1/4
38 3, 4, 5, 6 1-1/2" 1/8, 3/16, 1/4
40 3, 4, 5, 6, 8 1-5/8" 1/8, 3/16, 1/4, 5/16
45 3, 4, 5, 6 1-3/4" 1/8, 3/16, 1/4
50 3, 4, 5, 6, 8, 9, 10 2" 1/8, 3/16, 1/4, 5/16, 3/8
60 5, 6, 8, 9, 10 2-3/8" 3/16, 1/4, 5/16, 3/8
65 5, 6, 8, 9, 10 2-1/2" 3/16, 1/4, 5/16, 3/8
70 6,7, 8, 9, 10 2-3/4" 1/4, 5/16, 3/8
75 6, 8 , 9, 10, 12 3" 1/4, 5/16, 3/8, 1/2
80 6, 8, 10, 12 3-1/8" 1/4, 5/16, 3/8, 1/2
90 6, 8, 10, 12 3-1/2" 1/4, 5/16, 3/8, 1/2
100 6, 8, 10, 12 4" 1/4, 5/16, 3/8, 1/2

Supply • Length up to 7 meters

Conditions • Hot Rolled Annealed Pickled (HRAP), Shot Blasted, Polished
• Both ends are Color Coded as per the Customers Specific Requirement
• Specifications as per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc
• 100% identified by Handheld Spectrometer
• Laser printing as per grade, size & heat no
• Free from radioactive elements & mercury, lead contamination

HRAP FLAT BARS

Size Range
Size (mm) Thickness (mm) Size (Inches) Thickness (Inches)
20 3, 4, 5, 6, 8, 9, 10, 12, 15 3/4" 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8
25 3, 4, 5, 6, 8, 9, 10, 12, 15, 20 1" 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4
30 3, 4, 5, 6, 8, 9, 10, 12, 15, 20, 25 1-1/8" 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1
35 3, 4, 5, 6, 8, 9, 10, 12, 15, 20, 25, 30 1-3/8" 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/8
40 3, 4, 5, 6, 8, 9, 10, 12, 15, 20, 25, 30, 35 1-5/8" 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/8, 1-3/8
50 3, 4, 5, 6, 8, 9, 10, 12, 15, 20, 25, 30, 35, 40 2" 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/8, 1-3/8, 1-5/8
60 5, 6, 8, 9, 10, 12, 15, 20, 25, 30, 40 2-3/8" 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/8, 1-5/8
65 6, 8, 9, 10, 12, 15, 20, 25, 30 2-1/2" 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/8
70 6, 8, 10, 12, 15, 20, 25, 30, 35, 40 2-3/4" 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/8, 1-3/8, 1-5/8
75 6, 8, 9, 10, 12, 15, 20, 25, 30, 35, 40 3" 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/8, 1-3/8, 1-5/8
80 6, 8, 9, 10, 12, 15, 20, 25, 30, 35, 40 3-1/8" 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/8, 1-3/8, 1-5/8
90 10, 12, 15, 20, 25, 30, 35, 40 3-1/2" 3/8, 1/2, 5/8, 3/4, 1, 1-1/8, 1-3/8, 1-5/8
100 10, 12, 15, 20, 25, 30, 32 4" 3/8, 1/2, 5/8, 3/4, 1, 1-1/8, 1-1/4

Supply • Length up to 7 meters

Conditions • Hot Rolled Annealed Pickled (HRAP), Shot Blasted, Polished
• Both ends are Color Coded as per the Customers Specific Requirement
• Specifications as per EN, DIN, JIS, ASTM, BS, ASME, AISI, etc
• 100% identified by Handheld Spectrometer
• Laser printing as per grade, size & heat no
• Free from radioactive elements & mercury, lead contamination

FORGED & TURNED ROUND BARS

Size Range 130 mm - 500 mm (5" - 20”)
Length 3 to 6 Meters
General Condition Ultrasonic Tested • Free From Surface Defects and Cracks •
100% Identified with Handheld Spectrometer Free from
radioactive elements & mercury, lead contamination
Heat Treatment Soft Annealed, Solution Annealed, Quenched & Tempered
Surface Condition Rough Turned OR Machined
 Tolerance Chart
SS Round Bars as per ISO-286
Size Range(mm) h8 h9 h10 h11 h12 h13 k12 k13
Upto 6 -0.018 -0.030 -0.048 -0.075 -0.120 -0.180 +0.12 +0.18
Over 6 upto 10 -0.022 -0.036 -0.058 -0.090 -0.150 -0.220 +0.15 +0.22
Over 10 upto 18 -0.027 -0.043 -0.070 -0.110 -0.180 -0.270 +0.18 +0.27
Over 18 upto 30 -0.033 -0.052 -0.084 -0.130 -0.210 -0.330 +0.21 +0.33
Over 30 upto 50 -0.039 -0.062 -0.100 -0.160 -0.250 -0.390 +0.25 +0.39
Over 50 upto 80 -0.046 -0.074 -0.120 -0.190 -0.300 -0.460 +0.30 +0.46
Over 80 upto 120 -0.054 -0.087 -0.140 -0.220 -0.350 -0.540 +0.35 +0.54

SS Round Bars as per ASTM A 484

Size Range(Inch) Tolerance
1/16” to less than 5/16” +/-0001”
5/16” to less than 1/2” +/-0015”
½” to less than 1” +/-002”
1” to less than 1-1/2” +/-0025”
1-1/2”to less than 4” +/-003”

TM

Chemical Composition
AISI ASTM Equ. to EN DIN C% Max Mn % Max Si % Max S % Max P % Max Cr % Max Ni % Max Mo % Max Others %
201 – 0.15 8 min 1.00 0.030 0.070 12 min 0.50 min – Cu 1-1.5
202 – 0.15 7.5-10 1.00 0.030 0.060 17.00-19.00 4.00-6.00 – –
302 1.4310 0.15 2.00 1.00 0.030 0.045 17.00-19.00 8.00-10.00 – –
302HQ 1.4567 0.03 2.00 1.00 0.030 0.045 17.00-19.00 9.00-10.00 – Cu : 3.00 - 4.00
303 1.4305 0.15 2.00 1.00 0.15 Min 0.20 17.00-19.00 8.00-10.00 – Cu : 1% max.
303EHS – 0.15 2.00 1.00 0.30-0.33 0.20 17.00-19.00 8.00-10.00 – Cu : 1% max.
304 1.4301 0.08 2.00 1.00 0.030 0.045 18.00-20.00 8.00-11.00 – –
304HC – 0.05 2.00 1.00 0.030 0.045 18.00-20.00 8.50-9.50 – Cu : 2.00-2.50
304L 1.4307 0.03 2.00 1.00 0.030 0.045 18.00-20.00 8.00-12.00 – –
308LER 1.4331 0.02 1.5-2.0 0.50 0.020 0.025 19.00-21.00 9.50-11.00 – –
309LER 1.4332 0.03 1.5-2.0 0.50 0.015 0.020 23.00-25.00 12.00-14.00 – –
310 1.4841 0.25 2.00 1.50 0.030 0.045 24.00-26.00 19.00-22.00 – –
310S 1.4842 0.08 2.00 1.50 0.030 0.045 24.00-26.00 19.00-22.00 – –
316 1.4401 0.08 2.00 1.00 0.030 0.045 16.00-18.00 10.00-14.00 2.00-3.00 –
316L 1.4404 0.03 2.00 1.00 0.030 0.045 16.00-18.00 10.00-14.00 2.00-3.00 –
316LER 1.4430 0.02 1.5-2.0 0.50 0.020 0.020 18.00-20.00 12.00-14.00 2.00-2.75 –
316Ti 1.4571 0.08 2.00 1.00 0.030 0.045 16.00-18.00 10.00-14.00 2.00-3.00 Ti: Min (5xC%)
317LN 1.4438 0.03 2.00 1.00 0.030 0.045 18.00-20.00 11.00-15.00 3.00-4.00 N : 0.10-0.22
321 1.4541 0.08 2.00 1.00 0.030 0.045 17.00-19.00 9.00-12.00 – Ti : Min (5xC%)
410 1.4006 0.15 1.00 1.00 0.030 0.040 11.50-13.50 – – –
416 1.4005 0.15 1.25 1.00 0.15 Min 0.060 12.00-14.00 – – –
416XM – 0.15 1.25 1.00 030-0.33 0.060 12.00-14.00 – – –
420 1.4021 0.15 Min 1.00 1.00 0.030 0.040 12.00-14.00 – – –
430 1.4016 0.12 1.00 1.00 0.030 0.040 16.00-18.00 – – –
430L – 0.03 1.00 1.00 0.030 0.040 16.00-18.00 – – –
430F 1.4104 0.12 1.25 1.00 0.15 Min 0.060 16.00-18.00 – – –
431 1.4057 0.20 1.00 1.00 0.030 0.040 15.00-17.00 1.25-2.50 – –
17-4PH 1.4542 0.07 1.00 1.00 0.030 0.040 15.00-17.50 3.00-5.00 – Cu : 3.00-5.00
Duplex & Super Duplex
F51/F60 1.4462/UNS31803 0.030 2.00 1.00 0.015 0.035 22-23 4.50-6.50 2.50-3.50 N2PPM 0.10-0.22
F53 1.4410/UNS32750 0.030 1.20 0.20-0.80 0.020 0.035 24-26 6.00-8.00 3.00-5.00 N2PPM 0.24-0.32
 PRODUCT SPECIFICATIONS
Stainless Steel Forgings, Flanges & Stub Ends
Types of Flanges : Slip On, Weld Neck, Blind, Socket Weld, Threaded, Lap Joint, RTJ, Orifice etc.

We have world class ultra modern manucaturing facilities for forging and flanges. Our range of Industrial flanges are ideal for
application in diverse industry for high pressure and temperature applications we manufactures flanges according to various
Specifications.
The complete specifications and size range are given below.

Specification
Item Type Pressure Class Size Range
(Latest edition)

Blind, Weld Neck, Slip-on, Socket Weld, 150 to 1500LBS 1/2“ to 24”
ASME/ANSI B16.5 Threaded and Lap Joint Flanges 2500LBS 1/2“ to 12”
ASME/ANSI 75 to 600LBS 26“ to 60”
Blind, Weld Neck Flanges (Series A & B)
B16.47 900LBS 26" to 48”
ASME/ANSI Orifice Flanges ( Weld Neck, Slip-on,
300 to 2500LBS 1" to 12"
B16.36 Threaded)
PN2.5 to PN16 10mm to 1800mm
PN25 10mm to 1000mm
01 (Plate flange), 02 (Loose Plate flange for types
32—37), 04 (Loose Plate flange for type 34),05 PN40 10mm to 600mm
(Blind flange), 11 (Weld-Neck flange), 12 (Hubbed
EN 1092-1 / DIN / Slip-on flange), 13 (Hubbed Threaded flange), PN63 10mm to 400mm
BS 4504 Flanges 21 (Integral flange), 32 (Weld-on Plate Collar), PN100 10mm to 350mm
33 (Lapped End Pipe), 34 (Weld-Neck Collar), 35
(Welding Neck), 36 (Pressed Collar with Long Neck), PN160, PN250 10mm to 300mm
37 (Pressed Collar)
PN320 10mm to 250mm
PN400 10mm to 200mm
BS 10 Blind, Slip-on and Welding neck flanges TABLE-A,D,E,F,H,J,K,R,S,T 15mm to 600mm
ASME/ANSI B16. S10, S40, S80 ½” to 24”
Stub end -Type:A, B, C (Short pattern)
9/MSS SP-43

Note: We can also manufacture according to other standards like API-605, JIS, UNI, AWWA and as per drawings of
customers
Flange Face Type: Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ), Large Raised face (LRF)
Coating/Surface Treatment (if applicable): Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip
Galvanized
ASTM A182 : F304/304L/304H, F316/316L, F316H, F316TI, F321/321H, F317L, F317H, F347/347H
DIN EN10222-5: 1.4301, 1.4307, 1.4401, 1.4404, 1.4571, 1.4541, 1.4438, 1.0460, 1.4435, 1.4057, 1.4006, 1.4021
Carbon Steel : ASTM A105/A105N, A350 LF1, LF2, RST37.2, C22.8, SA266 Gr2/Gr4
Alloy Steel : ASTM A182 F6, F5, F9, F11, F12, F22, F91/F6a
Special Alloy : Duplex – F51/F60 - 1.4462 – UNS S31803
Special Alloy : Super Duplex – F53 – 1.4410 – UNS S532750
 • Machine Components • Medical • Wind Mill • Power Transmission

• Automotive • Petrochemical & Pharmaceutical • Cutlery • Defence

• Power Plant • Conveyor Belts • Oil and Gas • Energy

• Buliding & Construction • Fabrication • Pipelines • Boats or Ships

TM

ISO 9001:2008 and AD2000 Merkblatt WO Certified Company

Corporate Office : Registered Office : Works :

Office No. 405, The Landmark, 919, IJMIMA Complex, Gut No. 92/3, 422, 423, 424,
Plot No. 26A, Sector 07, Raheja's Metroplex, Link Road, Village Abitghar,
Kharghar, Navi Mumbai - 410 Malad (West), Mumbai - 400 064, Shirishpada - Shahapur Road,
210, Maharashtra, India. Taluka Wada, Dist. Palghar - 421 303,
Maharashtra, India. Website : www.jayjagadamba.com Maharashtra, India.
Tel. : +91 22 27763506
Fax : +91 22 27763507
Email : [email protected]