Scribd
Upload
375 views

Gagemaker Tdwin Taper Sample Reports

This document is a gage setup report and inspection report for an NCXX pin. It details the machine, operator, inspector and gaging procedures used. It lists the dimensions checked including pitch diameter, thread lead, thread taper, and thread height. Tolerance requirements and serial numbers for the gages used are provided. Dimensions for each pin inspected are recorded along with actual variations and whether each pin is accepted or rejected.

Uploaded by

Rosendo Rizo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
375 views

Gagemaker Tdwin Taper Sample Reports

This document is a gage setup report and inspection report for an NCXX pin. It details the machine, operator, inspector and gaging procedures used. It lists the dimensions checked including pitch diameter, thread lead, thread taper, and thread height. Tolerance requirements and serial numbers for the gages used are provided. Dimensions for each pin inspected are recorded along with actual variations and whether each pin is accepted or rejected.

Uploaded by

Rosendo Rizo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Date: 8/17/2009 1:05:45 PM Machine A:

Customer: Pipe & Repair Shop Operator A:


Address 1: Machine B:
Address 2: Operator B:
City, State ZIP: New Orleans, LA Inspector(s):
Contact Name: John Smith Gaging Procedure(s):
Work Order No.: Quantity Ordered:
Customer PO: Quantity Completed:
Drawing No/Rev:
Description: NCXX Gage Setup Report

End "A"
API Conn. No. XX PIN
SETUP Gage Model Thread Block Frame Taper CPU Tolerance
No. Rolls/Ball Standard Standard Blocks Value
Contact
Pitch Diameter MRP-5501 TR-4238 FSTD-46NC-P TF-2.0RSC 3.9688 -.001/+.002

S/N

Ring Gage Standoff

S/N

Thread Lead LG-5002 T144 LS-1007 ±.0015

S/N

Thread Taper ET-7001 T144 +.0025/-000

S/N

Thread Height TH-3000RSC T072 10382-RS +.001/-.003

S/N

Bevel Diameter

Cyl Diameter

Shoulder Length

Thread Length

Tong Length

Weld Neck Dia.

O.A.L.

Profile TP-23-50-JSS

S/N

O.D.

I.D.

Benchmark

Notes: This report layout produced by TDWIN Taper


Setup Inspection Approval: _________________ Date:___________
Date: 8/17/2009 1:05:45 PM Machine A:
Customer: Pipe & Repair Shop Operator A:
Address 1: Machine B:
Address 2: Operator B:
City, State ZIP: New Orleans, LA Inspector(s):
Contact Name: John Smith Gaging Procedure(s):
Work Order No.: Quantity Ordered:
Customer PO: Quantity Completed:
Drawing No/Rev:
Description: NCXX RSC Pin Inspection Report

Actual Variation
API Conn. No. ;; PIN
Operation Dimension Tolerance No. No. No. No. No. No. No. No. No. No.
Pitch Diameter -.001/+.002

Ring Gage Standoff

Thread Lead LS-1007 ±.0015

Thread Taper 0.1667 +.0025/-000

Thread Height 10382-RS +.001/-.003

Bevel Diameter

Cyl Diameter

Shoulder Length

Thread Length

Tong Length

Weld Neck Diameter

O.A.L.

Profile

O.D.

I.D.

Upset Diameter

Heat/Lot No.

Accept/Reject

Notes: This report layout produced by TDWIN Taper


Setup Inspection Approval: _________________ Date:___________

You might also like