Scribd
Upload
19 views1 page

Electronic Touch Screen Open

The document describes the displays on an electronic touch screen for an air compressor. The main display shows operating parameters like filling pressure and temperature. The hour meter display tracks running hours and maintenance intervals. The customer setting display allows setting the maximum filling pressure before the compressor turns off. The alarm display indicates issues that could require attention like high pressures or low oil levels.

Uploaded by

Jose Andrade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views1 page

Electronic Touch Screen Open

The document describes the displays on an electronic touch screen for an air compressor. The main display shows operating parameters like filling pressure and temperature. The hour meter display tracks running hours and maintenance intervals. The customer setting display allows setting the maximum filling pressure before the compressor turns off. The alarm display indicates issues that could require attention like high pressures or low oil levels.

Uploaded by

Jose Andrade
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ELECTRONIC TOUCH SCREEN

MAIN DISPLAY

ON DEMAND

HOUR METER DISPLAY

CUSTOMER SETTING DISPLAY

TOUCH SCREEN CODE SC000596

ALARM DISPLAY

MAIN DISPLAY: ALARM DISPLAY:


- FILLING: IT DISPLAYS THE FILLING PRESSURE - OIL PRESSURE ALARM: MAXIMUM OIL PRESSURE ALARM.
- MAXIMUM PRESSURE: IT DISPLAYS THE MAXIMUM FILLING - FIRST STAGE PRESSURE ALARM: FIRST STAGE MAXIMUM PRESSURE ALARM.
PRESSURE, WHEN IT IS REACHED THE COMPRESSOR - SECOND STAGE PRESSURE ALARM: SECOND STAGE
TURNS OFF. MAXIMUM PRESSURE ALARM.
- PANEL TEMPERATURE: IT DISPLAYS THE TEMPERATURE INSIDE - THIRD STAGE PRESSURE ALARM: THIRD STAGE MAXIMUM
THE COMPRESSOR PRESSURE ALARM.
- RUNNING: COMPRESSOR ON - PANEL TEMPERATURE ALARM: MAXIMUM PANEL TEMPERATURE ALARM.
- STOP: COMPRESSOR OFF - OIL LEVEL ALARM: LOW OIL LEVEL ALARM.
- DISCHARGE: MANUAL DISCHARGE - REVERSED PHASE ALARM: THREE-PHASE SEQUENCE
HOUR METER DISPLAY: ALARM, REVERSE TWO PHASES OF THE ELECTRICAL
- TOTAL HOURS: HOURS RUNNING THE COMPRESSOR SUPPLY LINE OF THE COMPRESSOR.
- OIL/FILTER CHANGE: HOURS REMAINING FOR OIL/FILTER CHANGE - MANOSTAT ALARM: MANOSTAT MAXIMUM PRESSURE
- SUCTION FILTER CHANGE: HOURS REMAINING FOR OIL CHANGE ALARM, THE FILLING PRESSURE REACHED THE MAXIMUM
CUSTOMER SETTING DISPLAY: PRESSURE SET UP ON THE FRONT MANOMETER.
- MAXIMUM PRESSURE: IT IS THE MAXIMUM FILLING - MOTOR THERMAL ALARM: COMPRESSOR MOTOR THERMAL
PRESSURE OF THE COMPRESSOR; WHEN THIS PRESSURE TRIP SWITCH, OPEN THE ELECTRICAL PANEL AND RE-SET
IS REACHED, THE COMPRESSOR TURNS OFF. THE THERMAL SWITCH.

You might also like