Scribd
Upload
600 views

Specification BM-45 GRADE

This document provides the typical values and purchase specifications for calcined alumina of BM-45 grade, including limits for composition (Na2O, Fe2O3, TiO2), loss on ignition, specific surface area, α-alumina content, moisture content, particle size distribution, and requirements for appearance and freedom from contamination.

Uploaded by

Sanjay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
600 views

Specification BM-45 GRADE

This document provides the typical values and purchase specifications for calcined alumina of BM-45 grade, including limits for composition (Na2O, Fe2O3, TiO2), loss on ignition, specific surface area, α-alumina content, moisture content, particle size distribution, and requirements for appearance and freedom from contamination.

Uploaded by

Sanjay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

CALCINED ALUMINA – BM-45 GRADE

Typical Purchase specification Inspection/Test


Characteristic
value (Min) (Max) method
Na2O content, % 0.35 0.4
Fe2O3 content, % 0.027 0.03
TiO2 content, % 0.008 0.015
Loss on ignition, % at 1100 °C 0.28 0.4
Specific surface area, m²/g 1.2 3
α-Alumina content, % 88 – –
IS:2720 (Part 2) - 1973
Moisture content, % 0.5
Section 4 or ACE TM/05
Particle size distribution
d50, µm (by Sedigraph) 2.9 3.3

Additional purchase specification:


Appearance: White powder
Material supplied must be free from any contamination, extraneous matter or free iron.

You might also like