Table of Contents

Section 4
Power Monitoring and Control

PowerLogic® Energy and Power Management Systems

Introduction 4-2, 4-3
Power Monitoring Software
PowerLogic ION Enterprise Software 4-4
PowerLogic System Manager Software 4-4
PowerLogic Scada 4-5
PowerLogic Powerview Software 4-5
PowerLogic ION EEM Enterprise Energy 4-6
SMS software Management Software
PowerLogic Metering
ION-E software
PowerLogic Power and Energy Meters 4-7
ION8600 4-7
ION7550/7650 4-7
ION7350/7330/7300 4-8
ION6200 4-8
PowerLogic ION and Power and Energy Meter 4-9
Selection
Series 700 Power Meter 4-10
Series 800 Power Meter 4-10
Series 3000 Circuit Monitor 4-10
Series 4000 Circuit Monitor 4-11
Submetering
Tenant Metering Software 4-13
CM4000 ION7650 PowerLogic E5600 Socket Meter 4-13
High Density Meter Enclosures (HDM) 4-14
Multi Circuit Energy Meters 4-14
Energy Meter 4-15
Enercept® Meter 4-15
Split Core Current Transformers 4-15
Branch Circuit Power Meter 4-16
New! Branch Current Monitor 4-16
Multi-Circuit Meter 4-16
Submeter Display 4-16
PowerLogic Solutions for Utilities 4-17
PrimeRead Software 4-17
PowerLogic Energy Profiler Online 4-18
Communications
Ethernet Gateways 4-19
Web Page Generator 4-19
Engineering Services
Sepam series 80 Consulting & Analysis 4-20
Industrial Energy Efficiency 4-20
HDM4 Panel Power Monitoring Applications 4-21
Power System Control Applications 4-21
System Integration 4-21
Factory Assembled Enclosures 4-22
Technical Support 4-23
Power Management University 4-23
Sepam Digital Protective Relays
Series 80, 40 & 20 Features 4-24
Series 80, 40 & 20 Applications 4-25
Series 80, 40 & 20 Pricing and Accessories 4-26
Selection Example 4-27
®
ReactiVar Power Factor Correction Capacitors
POWER MONITORING AND

Low Voltage Fixed Unfused Capacitor 4-28

Low Voltage Fixed Fused Capacitor 4-29
Automatic Power Factor Capacitor Banks 4-30
Anti-Resonant and Filtering Capacitor Banks 4-31
CONTROL

LV Transient Free Reactive Compensation Banks 4-32

CT Selection and Enclosure Dimensions 4-33
Low Voltage Fixed Capacitors Medium Voltage Fixed and Automatic Capacitor Banks 4-34
AccuSine® Active Harmonic Filter 4-35
Hybrid VAR Compensator (HVC) Overview 4-36
4

© 2009 Schneider Electric 4-1

All Rights Reserved
 PowerLogic®

Three dimensions of energy and power management savings

Volatile energy prices and stringent emissions standards have made it more challenging to
control operational costs thus putting profits at risk. Square D PowerLogic® energy and
power management systems will help you make the most of your energy by:
Reducing Utility Costs & Increasing Energy Efficiency
Achieve significantly reduced direct consumption-related costs through improved efficiency,
lower emissions and more accountability. And if you're a property manager, you can
increase the accuracy of energy settlements that can help attract or retain tenants. By
simply installing a PowerLogic® power monitoring system, our customers over the past
twenty years have reported realizing a 2-4% savings in utility costs-but that's just the “tip of
the iceberg” in terms of your potential savings.
Optimizing Equipment Utilization
Avoid or defer capital costs by better utilizing existing electrical infrastructure typically
results in another 2-5% savings. By monitoring key points and collecting system loading
information, engineering is able to make decisions on a plant's capacity to handle new
production lines or to determine if additional distribution equipment is required for a building
expansion.
Improving System Reliability & Safety
Typically, another 10% can be found by discovering power system reliability improvements
with powerful PowerLogic® metering that offers extremely accurate and high speed event
capture information. Once detected, future power disturbances are often correctable and
can help facilities avoid expensive and often hidden risks to productivity. As an added
benefit, PowerLogic monitoring system information is accessible from the safety of your
personal computer. This offers improved worker safety since it is not necessary to suit up in
personal protective equipment to access energized equipment over the network.
PowerLogic® systems give you the power to achieve this kind of savings, resulting in a
quick return on your investment. We pride ourselves on reliable products, innovative
systems, expert engineering services, and our ability to provide single-source energy and
power management solutions. It's not just a concept to us, it's a legacy and a promise-for
companies that seek an edge in productivity. That's why leaders turn to Schneider Electric.
4
POWER MONITORING AND
CONTROL

4-2 © 2009 Schneider Electric

All Rights Reserved
 PowerLogic®

Table 4.1:
Data Presentment & Management Data Acquisition, Alarms & Monitoring
Online Energy Supervisory Control & Power Monitoring
Enterprise Tenant Submetering
Analysis Data Acquisition System
Data Centers; Water/Wastewater, Industrial, large Commercial Buildings,
Industrial Buildings, Heavy Process commercial buildings, Government
Utilities Buildings,
Property Management, Industry, Data Centers, Military Bases, Military Bases
Utilities Critical Power Healthcare
For products see DIGEST section: 4-6 4-17 4-5 4-4 thru 4-12 4-13 thru 4-16
For services see DIGEST section: 4-20 4-20 4-21 4-21 4-22
Meter Application
Automatic Meter Reading • •••• ••
Revenue Metering • •••• ••
WAGES Utility Pulses •••
Sub-billing ••• ••• ••••
Measurement & Verification •••• •• •••
Cost Allocation & Utility Billing
Energy Usage Analysis •••• ••• • •• •
Reduce Energy Costs &
Energy Efficiency Procurement Optimization •• ••• • •
Allocate Energy Costs • •
Interval Benchmarking & Profiling •••• ••• • ••
Total Load Aggregation ••••
Energy Efficiency
Emissions Tracking •• •••
Power Factor Correction • • •••
Peak Demand Reduction •• • ••• •••
Demand Response & Curtailment ••• •••
Improve Maintenance Practices
Commissioning & Troubleshooting ••• ••••
Equipment Monitoring: transformers, MCCs,
switchgear, switchboards, circuit breaker status, ••• ••••
protective equipment, capacitors, generators,
panelboards, PDU, UPS, etc.
Facility Planning
Optimize Equipment
Utilization Identify Equipment Capacity •••
Determine Transformer Stress •••
Equipment Asset Optimization •• •• •••
Improve Efficiency
Balance Circuit Loading •••
Balance Generator Usage •••
Optimize Chiller & Mechanical Equipment •
System Monitoring & Analysis
Transient Voltage Detection ••••
Sag/Swell Disturbance Monitoring ••••
Power Quality & Harmonic Analysis ••••
Improve Reliability & Power Quality Compliance •••• • •••
Safety
Alarm & System Diagnositics
Electrical Distribution Alarm & Event Analysis • ••• ••••
Waveform capture viewing ••••
Remote alarm notification •••• •••
Energy Services

Total Energy Control Services •••• see section 4- 20 for •••

Engineering Services
Peak Shaving/Generator Control •••• •• see section 4- 20 for
Engineering Services
Load Management/Shedding see section 4- 20 for Engineering Services •••• ••
WAGES •••
Advanced Reliability Services
Auto Throw Over (ATO) •••• ••
Engineering Services
Emergency Power Supply System Test Reporting ••••
Sequence of Events Recording (1ms time/stamp) •••• ••• see section 4- 20 for
see section 4- 20 for Engineering Services
GPS Time Stamping •••• ••• Engineering Services
Power System Control •••• •
Network Protection •••• ••
Consulting Services
System Studies (SC/TCC/Arc Flash)
see section 4- 20 for Engineering Services
Power System Assessments
POWER MONITORING AND
4 CONTROL

© 2009 Schneider Electric 4-3

All Rights Reserved
 PowerLogic® PowerLogic Operations Software

ION Enterprise Software System Manager Software

PowerLogic ION Enterprise Software

PowerLogic ION Enterprise software is an all-in-one package for operational power system monitoring, analysis and
control that helps you reduce energy-related costs. It offers control capabilities, comprehensive power quality and
reliability analysis and helps reduce energy related costs. The software is a suite of applications that allows you to
collect, process, analyze, store, and share data across your entire enterprise. PowerLogic ION Enterprise software is
designed to give you the information and analysis tools you need to make sound decisions. Its cutting-edge flexibility
and compatibility allow you to extend your energy management system at your own pace, adding newer components
as they become available, without interrupting or impacting existing functions. PowerLogic ION Enterprise collects
data through serial, wireless, modem or Ethernet links and can manage a single site or, through the Internet, connect
a global network of devices.

Table 4.2: PowerLogic ION Enterprise Software Ordering Information

Description Catalog No. $ Price
Core Software Productsa
ION Enterprise Base software IONE56BASE 719.00
ION Enterprise Device license (For 100+ devices, please call the factory for volume pricing) IONE56DL 251.00
ION Enterprise Client license IONE56CL 719.00
ION Enterprise Unlimited devices version upgrade to 5.5 or later (requires IONE56UPGRADE) ION56-UNLTD 13421.00
OPC Server support for ION Enterprise IONEOPCV1 3055.00
SQL Server 2005 bundle option (CD and 1-CPU license) IONESQL2005 2440.00
SQL Server 2005 additional CPU license IONESQL2005CPU 1525.00
Upgrades to PowerLogic ION Enterprise 5.6
ION Enterprise Base Upgrade IONE56UPGRADE 359.00
ION Enterprise Device upgrade IONE56DLUPG 125.00
ION Enterprise Client license upgrade IONE56CLUPG 359.00
ION Enterprise Unlimited device license (requires IONE56UPGRADE) ION56-UNLTD-UPG 26841.00
Related Items
ION Enterprise Replacement CD IONE60REPCD 215.00
ION Enterprise 5.6 Software Documentation Binder DOC-BINDERIE5 143.00
ION Enterprise 5.6 Administrator Guide DOC-UGUIDE204 71.00
ION Enterprise 5.6 Client User Guide DOC-UGUIDE205 35.00
a Every new system must be ordered with 1 IONE56-Base software and a minimum of 5 IONE56-DL device licenses.

PowerLogic® System Manager Software

PowerLogic System Manager Software is designed to help control the cost, quality and reliability of your electrical and
piped utilities. With a PowerLogic system installed at your facility, you can identify where extra capacity exists,
determine if and where the equipment is being overstressed and balance loads on your power equipment. By
examining and changing the way you use power, you will save money. System Manager gives access to information
so effective decisions can be made concerning utility cost allocation, capital equipment purchases and building
improvements. Plus, System Manager is an essential tool for operations personnel to keep systems running before
problems occur, using graphical data and early alarm notifications.
4

Table 4.3: PowerLogic System Manager Software Ordering Information

Description Catalog No. $ Price
Core Software Products
POWER MONITORING AND

System Mgr. Device Limited (1 web-enabled client, 16 devices, up to 32 devices with SMSDL32U, Interactive Graphics) SMSDL 4150.00
System Mgr. Standard Ed. (1 web-enabled client, MSDE or SQL Personal Edition with Interactive Graphics) SMSSE 12750.00
System Mgr. Professional Edition (10 web-enabled clients, SQL Server, Advanced Reports, Interactive Graphics) SMSPE 19950.00
Add On Modules
CONTROL

SMS OPC Server Application SMSOPC 2980.00

SQL Server 2005 End User License SMSLIC 1785.00
Active Pager Module - Paging applications with conditional alarms assigned by shift 9789PAGE 3820.00
WAGES Module - Monitoring electrical and piped utilities available with engineered project Available as Engineered Project
SER Module - Sequence of Events software interface for GPS time synch available with engineered project 9789SER 15000.00
EPSS Test Report Module available with engineered project 9789EPSSTSTRPT 4650.00
Extension Products
Enables Standalones (DL & SE) with Remote Web clients (5 pk licenses) SMSWebXTR 2575.00
Extends SMSDL to 32 device limit SMSDL32U 2575.00
Converts SMSDL to SMSSE SMSDL2SE 8755.00

4-4 PM1 PL1 Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 PowerLogic® SCADA and Powerview Software

PowerLogic Scada Software Powerview Software

PowerLogic SCADA
PowerLogic® SCADA software was created to meet the requirement for real-time monitoring and control of electrical
distribution systems, including fast response times and high reliability through redundancy. PowerLogic SCADA is
powered by Citect® SCADA technology but is specifically designed for electrical power systems applications. The
complete PowerLogic supervisory control and data acquisition (SCADA) solution includes a dynamic graphical user
interface, enhanced alarm management, one second response times for control operation and status, transparent
redundancy, and reliable communications (through hardware components and network topology). The system also
features Sequence of Events Recorder (SER) logs with time stamps of 1ms resolution. PowerLogic SCADA software
includes a web-based client for remote viewing capability. The graphical user interface consists of animated objects
which change according to status information. The flexible graphics editor includes both ANSI and IEC electrical
symbols to facilitate easy one-line diagram creation. Real-time and historical trending is also supported.
PowerLogic® Powerview™ Software
PowerLogic Powerview is an entry level software designed for monitoring power consumption, allocating cost and
performing maintenance of small system applications. With Powerview software, system and device configuration is
simple and easy through its automatic device detect and connect feature. The software provides pre-configuration real-
time and historical data displays that retrieve onboard data logs from connected devices and performs PC-based
logging for devies without onboard memory. The software also features time of use capabilities for reporting energy
and demand values over user-specified time periods to satisfy special billing requirements and predefined reports for
analysis of energy usage, peak demand power, and more. Custom reports are available too for easy viewing, analysis,
sharing with other stakeholders or integrating into existing business platforms.
Table 4.4:
Description Catalog No. $ Price
Powerview Power Monitoring Software PLVENGUS 2850.00

POWER MONITORING AND

4 CONTROL

© 2009 Schneider Electric Discount 4-5

All Rights Reserved
PL1 Schedule
 PowerLogic® ION EEM Enterprise Energy Management Software

PowerLogic ION EEM is a complete enterprise

energy management solution that unites
business and energy strategies across your
entire enterprise by unifying and extending the
benefits of your existing energy-related data
resources. Stakeholders from management to
operations will be empowered by actionable
energy intelligence to reveal opportunities,
isolate problems and drive cost and risk
reduction strategies.
PowerLogic ION EEM automatically acquires
Personalized dashboards
data from power monitoring and control
help management and
systems, building and process automation
operations personnel
systems, utility information systems, weather
monitor all aspects of
services, spot-market energy pricing feeds, and
energy use and respond to
enterprise business applications, cleanses and
opportunities or threats.
warehouses it. Personalized, browser-based
dashboards and innovative visualization and
modeling tools then make the information
available to whomever needs it, so you can
accurately monitor, validate, predict and control
energy-related expenses.
From operational cost reductions to procurement support through cost allocation, benchmarking and budgeting, key
performance indicators and advanced analytics, PowerLogic ION EEM helps you manage energy in financial terms. It
also helps you gain unique insight into the impacts of power quality on your business and all energy assets. From the
service entrance to the boardroom, PowerLogic ION EEM software allows energy to be managed as a variable cost.
Key features
• True enterprise-level software architecture: data quality assurance, data warehouse, web framework
Produce aggregate billing, • Web portal: personalized dashboards, key performance indicators, charts, trends, real-time conditions
load profile, cost allocation, • Reporting: rich and customized content, support for complex data and graphics, scheduled distribution
power quality, forecasting or • Trending: advanced visualization, dimensional analysis, prediction, statistical rollups
budget reports to help inform • Modeling: regression analysis, normalization, correlation, integration of all relevant drivers and contextual data
stakeholders and track • Billing: built-in rate engine and rate wizard
results against goals. • Power quality analysis: wide-area event monitoring, classification, filtering, correlation
• Alarms and events: triggering on complex conditions, notification, logging
• Integration: meters and other devices, weather and pricing feeds, other enterprise applications (e.g. BAC, ERP)
• CO2 Report

Typical applications
• Manage all utilities (electricity, gas, water, etc.) and emissions through a single, unified interface
• Benchmark facility performance across an entire enterprise to identify energy inefficiencies
• Measure and verify savings from energy conservation projects or performance contracts
• Reduce operational costs, improve processes, and prolong asset life
• Meet corporate environmental stewardship goals or mandated impact targets
• Manage demand control schemes, load shedding, peak shaving, base loading or on-site generation
• Enable participation in real-time pricing and load curtailment programs
• Optimize procurement by forecasting and budgeting for energy needs and comparing utility rates
Use advanced billing
• Identify utility billing errors and validate contract compliance
functions to support energy
• Allocate and recover utilities costs from tenants, departments, processes, etc.
procurement and manage • Maximize the use of existing infrastructure capacity and avoid overbuilding
load or generation assets in • Identify and reduce risks to uptime
response to curtailment or Data presentment tier
pricing signals.
Web portal delivers enterprise-wide access
through personalized dashboards, reports,
detailed analytics, and integration of views
from third-party systems. Information and
alerts via cell phone, PDA, pager and more.
Business applications tier
Standard and optional modules tailor
functionality to specific needs. Advanced
4

analytics and reporting on every driver and

relationship affecting energy cost and
reliability.
Data management tier
POWER MONITORING AND

Integration of data from many sources: power

monitoring and control systems (PowerLogic or
third party), utility metering systems (water, air,
CONTROL

gas etc.), Internet weather, real-time energy

pricing feeds, manual input, energy assets
(power distribution and reliability equipment,
generators), line-of-business systems (BAC,
DCS, ERP, EAM, accounting). Data quality
Monitor power quality risk module assures complete and reliable data
factors, benchmark from all inputs.
performance, determine
impacts, validate contract For price and ordering information, contact your local PowerLogic Sales Specialist or PowerLogic
compliance, isolate problem Inside Sales at 1-866-466-7627.
sources, and confirm your
return-on-investment.

4-6 © 2009 Schneider Electric

All Rights Reserved
 PowerLogic®
ION8600/7550/7650 Power and Energy Meters
ION8600/7550/7650 Power and Energy Meters
The web-enabled PowerLogic ION8600 is used to monitor electric distribution networks, service entrances and substations. It enables businesses
to manage complex energy supply contracts that include power quality guarantees. Low-range current accuracy makes it ideal for independent
power producers and cogeneration applications that require the accurate bi-directional measurement of energy. It is well suited to load curtailment,
equipment monitoring and control and energy pulsing and totalization applications. Integrate it with PowerLogic ION EEM enterprise energy
management software, PowerLogic ION Enterprise operations software or other energy management and SCADA systems.
PowerLogic ION8600 Power and Energy Meter Features
Feature set C includes:
• Password protection and anti-tamper seal protection
• 9S, 39S, 35S, 36S, 76S socket and switchboard cases
• Built-in I/O: 4 KYZ digital outs and 3 form A digital ins, an optional
• True RMS 3-phase voltage, current, power and meets stringent ANSI
external I/O expander provides additional I/O
revenue metering standards including ANSI C12.20 0.2 and Class 2,
Feature set B adds the following to feature set C:
10, & 20
• Power quality: sag/swell, individual, even, odd, total harmonics to the • Harmonics - individual, total even, total odd up to the 63rd
31st and symmetrical components • 4MB standard memory
• 2MB log/event memory, min/max for any parameter, historical logs up • Historical logs up to 320 channels
to 32 channels, timestamp resolution to 0.001 seconds and GPS time • Modbus RTU Master on serial ports
synchronization • Cycle setpoint minimum response time
• Transformer/line loss compensation and Instrument transformer Feature set A adds the following to feature sets C and B:
correction • Waveform capture up to 256 samples/cycle, PQ compliance
• Communications: Fiber, Ethernet, Serial, Modem, Internet and Ethernet monitoring, flicker to EN50160, IEC 6100-4-7/4-15 (also
to serial gateway and ION, DNP 3.0, Modbus RTU, Modbus TCP and configurable to IEEE 519-1992, IEEE159, SEMI) CBEMA/ITIC
MV-90 protocols • Transient detection to 65µs at 60Hz;
• Dial-out capability when memory is near full • Harmonics: magnitude, phase and inter-harmonics to the 40th
• Multi-user, multi-level security with control and customized access to • 10MB standard memory
sensitive data for up to 16 users • Max 96 cycles of waveform logs and 800 channels of historical
• Data push capability through SMTP (email) logs
• 65 setpoints — math, logic, trig, log, linearization formulas

Table 4.5: Typical PowerLogic ION8600 Power and Energy Meter Ordering Configurations
Description Catalog No. $ Price
ION8600, feature set A, 9S socket base, 5A nominal current inputs, auxiliary power pigtail: 65-120Vac/80-160Vdc, 60 Hz, communications card with: 10baseT Ethernet S8600A0C0H6E0A0A 6252.00
— RS-232/485 — Optical, RS-485
ION8600, feature set B, 9S socket base, 5A nominal current inputs, auxiliary power pigtail 65-120Vac/80-160Vdc, 60 Hz, communications card with: 10base T Ethernet S8600B0C0H6E0A0A 4700.00
— Optical, RS-485
ION8600, feature set C, 9S socket base, 5A nominal current inputs, auxiliary power pigtail 65-120Vdc/80-160Vac, 60 Hz, communications card with: RS-232/485. S8600C0C0H6A0A0A 2609.00
RS-485, Optical port, standard I/O

PowerLogic ION7550 and ION7650 Power and Energy Meters

Used at key distribution points and sensitive loads, the web-enabled PowerLogic ION7550 and PowerLogic ION7650 meters combine a wealth of
advanced features from power quality analysis capabilities, revenue accuracy and multiple communications options, through web compatibility, and
control capabilities. Both are compatible with PowerLogic ION EEM enterprise energy management software, PowerLogic ION Enterprise
operations software can be integrated with other energy management or building control systems through multiple communication channels and
protocols.
The meters are ideal for compliance monitoring, disturbance analysis, cost allocation and billing, demand and power factor control and equipment
monitoring and control. The meters have a high visibility, adjustable front panel display that can depict TOU, harmonics, event logs, phasers, and
instantaneous power parameters. They meet stringent ANSI C12.20 0.2, Class 10 & 20 revenue metering standards.
PowerLogic ION7550 and ION7650 Power and Energy Meter Features
The PowerLogic ION7550 includes: • Multi-user, multi-level security with control and customized
• 3.5” x 4.5” (87 x 112 mm) backlit LCD display access to sensitive data for up to 16 users
• True RMS 3-phase voltage, current, and power that meets stringent ANSI • 65 configurable _ cycle setpoints for single, multi-condition and
C12.20 0.2, Class 2, 10, & 20 dial out on alarm and math, logic, trig, log, linearization formulas
• Power quality: sag/swell, harmonics - individual, even, odd, total to the • Password protection and anti-tamper seal protection enhance
63rd, waveform capture at 256 samples/cycle meter security
• 5MB log/event memory (10MB optional), waveform logging up to 96 • Extensive standard I/O includes: 8 digital inputs, 4 digital outputs
cycles, up to 800 channels historical, min/max, timestamp resolution to and 3 onboard relays
0.001 seconds, GPS time synchronization and historical trends through The ION7650 has all the features of the ION7550 and adds:
front panel • Waveform capture up to 1024 samples/cycle
• Communications: fiber, Ethernet, serial, internal modem, optical port, and • Transient detection to 17µs at 60Hz
a gateway functionality, ION, DNP 3.0, Modbus RTU - master & slave, • Harmonics: magnitude, phase and inter-harmonics to the 40th
Modbus TCP and MV-90 • Flicker to EN50160 and IEC 6100-4-7/4-15 (also configurable for
• Dial-out capability when memory is near full IEEE 519-1992, IEEE159, SEMI), plus CBEMA/ITIC
• Data push capability through SMTP (email) • Symmetrical components

Table 4.6: Typical PowerLogic ION7550/7650 Power and Energy Meter Ordering Configurations
Description Catalog No. $ Price
POWER MONITORING AND

Typical PowerLogic ION7550 Power and Energy Meter Ordering Configurations

Integrated display, with 512 samples/cycle, 5 MB logging memory, 5A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 S7550A0C0B6E0A0A 6318.00
optical port) plus Ethernet, standard I/O
Integrated display, with 512 samples/cycle, 5 MB logging memory, 5A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2
CONTROL

S7550A0C0B6A0A0A 5589.00
optical port), standard I/O
Typical PowerLogic ION7650 Power and Energy Meter Ordering Configurations
Integrated display, with 1024 samples/cycle, 10 MB logging memory, 5A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 S7650B1C0B6E0A0E 9279.00
optical port) plus Ethernet, standard I/O, EN50160 compliance monitoring
Integrated display, with 512 samples/cycle, 5 MB logging memory, 5A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 S7650A0C0B6E0A0A 7869.00
optical port) plus Ethernet, standard I/O
Integrated display, with 512 samples/cycle, 5 MB logging memory, 5A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 S7650A0C0B6C1A0A 8409.00
optical port) plus Ethernet, standard I/O
Integrated display, with 512 samples/cycle, 5 MB logging memory, 5A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type 2 S7650A0C0B6A0A0A 7140.00
optical port) plus modem, standard I/O
Integrated display, with 1024 samples/cycle, 10 MB logging memory, 5A inputs, standard power supply, standard comms. (1 RS232/RS485 port, 1 RS485, 1 Type S7650B1C0B6E0A0A 9279.00
2 optical port) plus Ethernet, standard I/O
Note: Please refer to powerlogic.com for the most complete and up-to-date list of feature availability. Some features are optional.
4

© 2009 Schneider Electric Discount 4-7

All Rights Reserved
PM1 Schedule
 PowerLogic® ION7350/7330/7300/6200 Power and Energy Meters

Used in diverse applications such as feeder monitoring and sub-metering, the PowerLogic ION7300 series meters are also
suitable for high-accuracy power and energy metering, bill verification, cost allocation and billing, demand and power factor
control, load studies, circuit optimization, equipment monitoring and control and preventative maintenance. They are ideal
replacements for analog meters, with a multitude of power and energy measurements, analog and digital I/O,
communication ports and industry-standard protocols. The ION7330 meter adds on-board data storage, emails of logged
data and an optional modem. The ION7350 meter is further augmented by more sophisticated power quality analysis,
alarms and a call-back-on-alarm feature. They are compatible with PowerLogic ION EEM enterprise energy management
software, PowerLogic ION Enterprise operations software or can be integrated with other energy management or building
control systems through multiple communication channels and protocols.
PowerLogic ION7350, ION7330 and ION7300 Power and Energy Meter Features
The PowerLogic ION7300 includes:
The ION7330 adds the following features:
• Multiple form factors: transducer integrated and • Time of use - multi-year scheduling, hourly activity profiles
remote display models, GE S1 or ABB FT21 • 4 digital inputs for status monitoring and pulse counting
switchboard forms • Communications: a second RS-485 port, internal modem, DNP 3.0
• True RMS 3-phase voltage, current, and power that through serial, modem and I/R ports, EtherGate and ModemGate,
meets stringent ANSI C12.16, Class 10 data/alarms via e-mail and MV-90 on serial and Ethernet ports
• Power quality: harmonics - individual, even, odd, total • 12, one second setpoints for single, multi-condition alarms, plus math,
to the 15th, maximum 32 samples/cycle logic, trig, log, and linearization formulas
• Communications: 1 RS-485 port, 1 optional Ethernet • Non-volatile onboard memory capacity of 300kb, min/max logging,
port, 1 ANSI Type 2 infrared optical port, 1 PROFIBUS min/max logging, up to 32 channels of historical logs, timestamp
DP port (ION7300 only), onboard web server resolution to 0.001 seconds
• Supported protocols include : ION, Modbus RTU slave The ION7350 includes the following additional features:
on serial, modem, I/R ports, Modbus TCP through
• Power Quality: sag/swell, individual, even, odd, total harmonics up to
Ethernet
31st , maximum 64 samples/cycle
• Extensive standard I/O includes: 4 analog inputs,
• Up to 96 channels of logs and up to 48 cycles of waveform logs
4 analog outputs, 4 digital relay outputs
• Alarm notifications via e-mail
• Minimum/maximum recording
- -

Table 4.7: Typical PowerLogic ION7350/7330/7300 Power and Energy Ordering Configurations
Description Catalog No. $ Price
Typical PowerLogic ION7350 Power and Energy Meter Ordering Configurations
Integrated display with optical port, 5A inputs, standard power supply, standard comms, (two RS-485 ports) plus 10BaseT S7350A0B0B0E0A0A 3567.00
Ethernet
Integrated display with optical port, 5A inputs, standard power supply, standard comms, (two RS-485 ports) S7350A0B0B0A0A0A 2906.00
Typical PowerLogic ION7330 Power and Energy Meter Ordering Configurations
Integrated display with optical port, 5A inputs, standard power supply, standard comms, (two RS-485 ports) plus 10BaseT S7330A0B0B0E0A0A 2800.00
Ethernet
Integrated display with optical port, 5A inputs, standard power supply, standard comms, (two RS-485 ports) S7330A0B0B0A0A0A 2159.00
Typical PowerLogic ION7300 Power and Energy Meter Ordering Configurations
Integrated display with optical port, 5A inputs, standard power supply, standard comms, (one RS-485 port) S7300A0B0B0A0A0A 1436.00

The modular PowerLogic ION6200 is a low-cost, ultra-compact meter that offers outstanding versatility and
functionality. It is simple to use, and has a big, bright LED display. It offers four-quadrant power, demand, energy,
power factor and frequency measurements, and is available in a variety of flexible configurations. It is available as a
low-cost base model to which enhanced functionality can be added over the long term. The PowerLogic ION6200 is
ideal for customers who need revenue-accurate and/or certified measurements and want easy integration with power
distribution assemblies and building automation systems. A Megawatt version is available for applications requiring
readings in megawatts and kilovolts. It is well suited for sub-metering, energy cost tracking load profiling, and
substation panel metering and is an ideal replacement for analog meters. It can be used for stand-alone metering in
custom panels, switchboards, switchgear, gensets, motor control centers and UPS systems.
The meter consists of a base unit with options card and a power supply pack, with a remote display being optional.
PowerLogic ION6200 Power and Energy Meter Features
• Only two inches deep, and fits a standard The standard ION6200 is available with the following parameters:
ANSI four-inch switchboard cutout, or as a
Voltage L-N average and per phase, Voltage L-L average and per phase,
TRAN model with no display and can be
Current average and per phase
fastened to a flat surface with a 4” (10cm)
ANSI bolt pattern or mounted to a DIN rail. Option EP#1, includes the standard measurements and provides the
A remote display module (RMD) can be following additional parameters:
ordered for the TRAN and mounted through I4, kW/mW total, kWh/mWh total, kW/mW peak, Current demand
an ANSI 4” (10cm) and DIN 96 cutout. average and per phase, Current peak demand average and per phase,
• LED display with twelve 3/4” (19mm) high Power factor total
4

digits that display all basic power parameters

• Pulse Outputs: optional kWh, kVARh and/or Optional Enhanced Package, includes the standard measurements
kVAh pulsing and provides the following additional parameters:
• Via two Form A outputs kW/mW per phase, kVAR/mVAR total and per phase, kVA/mVA total and
POWER MONITORING AND

• Communications: optional RS-485 port with per phase, kWh/mWh and del/rec per phase, kVARh/mVARh total and
Modbus RTU and ION compatible del/rec per phase, kVAh/mVAh total and per phase, kW/mW demand,
• 64 samples per cycle true RMS kVAR/mVAR demand and peak, kVA/mVA demand and peak, Power
• 3-phase voltage and current inputs Factor per phase, Voltage THD per phase, Current THD per phase
CONTROL

- -

Table 4.8: Typical PowerLogic ION6200 Power and Energy Meter Ordering Configurations
Description Catalog No. $ Price
Integrated display, 10A inputs, standard 100-240 Vac power supply, RS485 port (Modbus RTU), Enhanced Package #2 S6200A0A0B0A0A0R 943.00
TRAN Model, with remote display, 10A inputs, standard 100-240 Vac power supply, RS485 port (Modbus RTU), Enhanced S6200R1A0B0A0A0R 977.00
Package #2
TRAN Model, (no display), 10A inputs, standard 100-240 Vac power supply, RS485 port (Modbus RTU), Enhanced Package #2 S6200T1A0B0A0A0R 753.00
Note: Please refer to powerlogic.com for the most complete and up-to-date list of feature availability. Some features are optional.

4-8 PM1 Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 PowerLogic® Circuit Monitor and Power Meter Selection

Table 4.9: PowerLogic ION Power and Energy Meter Selection

ION8600
Featuresb ION7650 ION7550 ION7350 ION7330 ION7300 ION6200
A B C
Inputs, outputs and control power
3-phase / single-phase •/• •/• •/• •/• •/• •/• •/• •/• •/•
Digital in and out / analog in and out 8,8 / 3,4 8,8 / 3,4 8,8 / 3,4 16,4 / 4,4 16,4 / 4,4 4,4 / 4,4 4,4 / 4,4 4,4 / 4,4 0,2 /
Power supply options AC/DC AC/DC AC/DC AC/DC AC/DC AC/DC AC/DC AC/DC AC/DC
Power and energy measurements
V, I, F, PF • • • • • • • •
Power, demand • • • • • • • • •
Energy / time-of-use (energy per shift) •/• •/• •/• •/• •/• •/• •/• •/ •/
ANSI energy accuracy class (% of reading) 0.2 0.2 0.2 0.2 0.2 0.5 0.5 0.5 0.5
Measurement Canada Approval • • • • • • •
Loss compensation • • • • •
Power quality analysis
Compliance monitoring (e.g. EN50160) • •
Flicker measurement • •
Transient disturbance capture • •
Sag and swell monitoring • • • • • •
Harmonics measurement 63 rd 63 rd 31st 63 rd 63 rd 31st 15th 15th THD
Uptime (number of 9's) calculation • • • • • • • •
Waveform capture • • • •
Data and event logging
Trend / snapshot •/• •/• •/• •/• •/• • •
Min/max • • • • • • •
Events • • • • • • •
Timestamp resolution (seconds) 0.001 0.001 0.001 0.001 0.001 0.001 0.001
GPS sync • • •
Setpoints, alarms and control
Annunciation / call out on alarm •/• •/• •/• •/• •/• •/• •
Trigger logging • • • • • • •
Trigger relay or digital output control • • • • • • •
Special features
Custom programming: arithmetic, boolean, • • • • • • •
object-oriented
Downloadable firmware • • • • • • • • •
Communications
Ethernet port / web / email •/•/• •/•/• •/•/• •/•/• •/•/• •/•/• •/•/• •/•/ •/ /
Telephone modem port • • • • • • •
Infrared port • • • • • • • •
RS485 / RS232 ports •/• •/• •/• •/• •/• •/ •/ •/ •/
Modbus / DNP / MV-90 protocols •/•/• •/•/• •/•/• •/•/• •/•/• •/•/• •/•/• •/ / •/ /
b Specifications represent maximum capabilities with all options installed. Some options are not available concurrently. This is not a complete feature list,
please refer to detailed product specifications.

POWER MONITORING AND

4 CONTROL

© 2009 Schneider Electric Discount 4-9

All Rights Reserved
PL1 Schedule
 PowerLogic® Metering

PowerLogic Series 700 Power Meter

The PowerLogic PM700 series power meters offer all of the measurement capabilities required to monitor an electrical
installation in a single 96 x 96 mm unit extending only 50 mm behind the mounting surface (less than 2 inches).
With its large display, you can monitor all three phases and neutral at the same time. The anti-glare display features
large 11 mm high characters and powerful backlighting for easy reading, even in extreme lighting conditions and
viewing angles.
• Panel instrumentation (OEMs) • Remote monitoring of an electrical installation
• Sub-billing and cost allocation • Harmonic monitoring (THD)
Series 700 Power Meter
Power and current demand, THD and min/max reading in basic version
A high-performance solution for trouble-free monitoring of your electrical installation.
Energy Class 1 as defined by IEC 62053 (or IEC 61036)
Suitable for sub-billing and cost-allocation applications.
Table 4.10:
Description Catalog No. $ Price
Series 700 Power Meters
PM710 Power Meter with integrated display and comms PM710 710.00
PM750 Power Meter with (2) digital input, (1) digital output PM750 950.00

PowerLogic Series 800 Power Meters

The PowerLogic PM800 series Power Meter is a high-performance power-monitoring unit able to provide advanced
power measurement capabilities in a compact 96x96 mm unit. Its large, easy to read display allows you to monitor all
three phases and neutral simultaneously. With its easy to use intuitive interface and self guiding menus, the large anti-
glare and back lit display makes this meter the easiest yet to navigate and use. The modular design allows for flexibility
with an easy upgrade path to grow the meter's capabilities with the addition of Communication and I/O Modules.
• Monitor current, voltage, power and energy simultaneously • Available with 2 standard Digital I/O
• Trending/Forecasting Curves functionality (PM850/870) • Field installable Digital and Analog I/O
• 128 samples/cycle-zero blind metering • THD measurement
• Waveform capture (PM850), configurable waveform capture (PM870) • Meets IEC 60687, IEC 62053 and ANSI C12.20 Class
• Onboard logging (80k in PM820, 800k in PM850/PM870) 0.5S accuracy
Series 800 Power Meter
• Detection of sub-cycle sags/swells on both voltage and current • Programmable (logic and mathematical functions)
• Individual harmonics up to 63rd on both current and voltage • Optional field installable Ethernet communications card
with standard and custom web pages
• GPS Time Synchronization (PM870)

Table 4.11:
Description Catalog No. $ Price
Series 800 Power Meters
PM820 Power Meter with integrated display, THD, Alarming, 80kb Logging PM820 2390.00
PM850 Power Meter with integrated display, THD, Alarming, 800kb Logging, Waveform Capture PM850 3889.00
PM870 Power Meter with integrated display, THD, Alarming, 800 kb Logging, configurable Waveform Capture, Sag/Swell Detection PM870 4799.00
PM820 Meter unit only without display PM820U 2050.00
PM850 Meter unit only without display PM850U 3529.00
PM870 Meter unit only without display PM870U 4460.00
Series 800 Power Meter Accessories
PM800 Display for integrated meter unit PM8D 443.00
PM800 Module, 2 digital outputs, 2 digital inputs PM8M22 635.00
PM800 Module, 2 digital outputs (relays), 6 digital inputs PM8M26 635.00
PM800 Module, 2 digital out, 2 digital in, 2 analog out, 2 analog in PM8M2222 856.00
PM800 Mounting adapter for CM2000 PM8MA 267.00
PM8ECC Ethernet PM8ECC Ethernet Communications Card; 10/100 Base T Ethernet port and 1 RS-485 master port PM8ECC 1150.00
Communications Card
PowerLogic Series 3000 Circuit Monitor
The PowerLogic Series 3000 Circuit Monitor is designed for industrial, commercial and OEM users and is the ideal
monitoring device for electrical mains, branch feeders, as well as OEM applications, such as computer power. It
provides instant access to real time web pages without installing or learning special software.
CM3000 can serve up instantaneous readings, energy usage cost, power quality and disturbance analysis or even
customized web pages. Web-access summary data transparently from other devices connected downstream.
4

• Comes with 8Mb of standard memory allowing for more data • Built-in Trending and Forecasting functionality allows you to
logging than any other meter in its class forecast energy usage up to 4 days in advance
• 128 samples/cycle allow for zero blind metering • Custom web pages with optional Ethernet Communications
POWER MONITORING AND

• Sag/Swell disturbance monitoring(CM3350) Card

• 100 ms Event recording(CM3350) • Field installable Digital I/O card
• Harmonic Powerflows to the 40th harmonic • Meets IEC 60687 and ANSI C12.20 Class 0.5S accuracy
•
CONTROL

Sequence of events recording using GPS synchronization

Table 4.12:
Description Catalog No. $ Price
Series 3000 Circuit Monitors
Instrumentation, On-board Data Logging Waveform Capture, Disturbance Waveform Capture, Configurable I/O, 0.15% Accuracy CM3250 3944.00
Same as CM3250 plus Sag/Swell Disturbance Detection and 100 ms RMS Event Recording CM3350 5121.00
NOTE: See page 4-11 for Series 3000 Accessories
Series 3000 Power Meter

4-10 PL1 Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 PowerLogic® Metering

PowerLogic Series 4000 Circuit Monitor

The award winning, Web-enabled PowerLogic Series 4000 Circuit Monitor (CM4250) is the most advanced
permanently mounted circuit monitor in the industry today. Designed for critical power and large energy users who
cannot afford to be shut down, the CM4250 provides the ability to monitor, troubleshoot and preempt power quality
problems. Transients (disturbances lasting less than one cycle) are particularly difficult to detect, due to their short
duration. The CM4000T detects and captures oscillatory and impulsive transients (up to 10,000V peak, line-to-line at 5
MHz per channel) as short as one microsecond in duration. The CM4000T automatically performs a high-speed
transient waveform capture and a longer disturbance capture to show the conditions surrounding an event. The
CM4000T maintains a complete historical record of the number of transients per phase, along with the magnitude,
duration and time of occurrence of each. It also performs a stress calculation to determine the circuits that have
received the greatest stress from transient overvoltages.

• Waveform capture with up to 512 samples/cycle • Extended waveform capture (up to 110 seconds)
• Built-in Trending and Forecasting functionality allows you to • Field installable Digital/Analog I/O cards and flexible I/O
CM4000T with VFD Display forecast energy usage up to 4 days in advance extender modules
• Sag/Swell disturbance monitoring • Harmonic powerflows up to the 40th harmonic
• Two option card slots for field installable cards • Standard KYZ pulse output
• Optional field installable Ethernet communications card with • Standard 32 MB of non-volatile memory
standard and custom web pages • Integrated power quality standards including EN50160,
• Alarm Setpoint Learning feature allowing optimum threshold setting IEC 61000-4-15 (Flicker)
(patent pending) • Sequence of events recording using GPS synchronization
• Multiple alarms including standard, digital, Boolean, high-speed, technology
and disturbance alarms • Oscillatory transient detection and recording
• Waveshape alarm monitoring • Extended range current/voltage module(CVMXR) for
• High speed transient voltage detection at 5 MHz per channel with higher inrush currents available, field installable
field installable CVMT current/voltage module • UL Listed, CSA Approved, CE Marking, NOM Approved,
PCM4000 • True RMS Metering through the 255th harmonic FCC compliant
• Also available in a rugged sealed case as a Portable Circuit Monitor

PowerLogic Series 4000 Circuit Monitor Optional Displays

• High visibility remote VF (vacuum fluorescence) display
• Displays metering data, min/max values, alarms, inputs
• Remote LC (liquid crystal) display with backlighting also available
• Optional user configurable display screens
Table 4.13: Series 4000 Circuit Monitors
Description Catalog No. $ Price
Series 4000 Circuit Monitors
Instrumentation, On-board Data Logging, Waveform Capture, Disturbance Recording, Configurable I/O, 0.04% Accuracy CM4250 6386.00
Same as CM4000 plus Impulsive Transient Detection and Flicker (IEC 61000-4-15) CM4000T 8474.00
Portable CM4000 Base Unit, Detachable Vacuum Fluorescent Display, Ride-though Module, Cable Set and Carrying Bag PCM4000 14205.00
Portable CM4000 plus Impulsive Transient Detection and Flicker (IEC 61000-4-15) PCM4000T 17643.00
Series 4000 Circuit Monitor Accessories
Field installable I/O card with 3 relay outputs, 1 pulse output (KYZ) and 4 status inputs IOC44c 796.00
I/O Extender module with 4 DC status inputs, 2 DC digital outputs, 1 analog input and 1 analog output IOX2411 1253.00
I/O Extender module with 4 status inputs and 4 analog inputs (4-20 mA) IOX0404 1650.00
I/O Extender module with 8 status inputs IOX08 703.00
ECC21
I/O Extender module with no pre-installed I/O a IOX 459.00
Ethernet Communications Card; 100 MB Fiber or 10/100 MB UTP Ethernet port and 1 RS-485 master port ECC21c 1948.00
Current/Voltage module CVM 1325.00
Current/Voltage module with high speed transient detectionb CVMT 5393.00
4-line x 20 - character liquid crystal display with backlighting CMDLCc 688.00
4-line x 20 - character vacuum fluorescent display with proximity sensor CMDVFc 1207.00
I/R communications interface for the vacuum fluorescent display OCIVFc 604.00
4 foot display cable CAB4c 53.00
12 foot display cable CAB12c 89.00
30 foot display cable CAB30c 161.00
Portable Circuit Monitor 5A CT 150/300/600A Range (Order 3 for complete set) PLESNS36005 856.00
Portable Circuit Monitor 5A CT 500/1000/1500A Range (Order 3 for complete set) PLESH163155 1359.00
Portable Circuit Monitor 5A CT 1000/2000/3000A Range (Order 3 for complete set) PLESHP32335 1886.00
a Contact your nearest Square D/Schneider Electric sales office for additional I/O options.
IOC44 I/O Card b CM4000 is field upgradeable to provide additional features of specified module.
c Also available for CM3000

Table 4.14: SER Time Synchronization

Description Catalog No. $ Price
POWER MONITORING AND

PowerLogic Satellite Time System, Circuit Monitor and SEPAM GPS Time Synchronization, 100 microsecond accuracy STS3000 5348.00
Satellite Time Reference Module STRM 2827.00
Smart Antenna Module SAM 2292.00
Smart Antenna Module Interface Cable - 200 FT SAIF200 611.00
CONTROL

Power Supply, 24DC/50W, DIN-mountable PS080 558.00

4

© 2009 Schneider Electric Discount 4-11

All Rights Reserved
PL1 Schedule
 PowerLogic® Submetering

Table 4.15: PowerLogic Circuit Monitor and Power Meter Selection

Features CM4000T CM4250 CM3350 CM3250 PM870 PM850 PM820 PM750 PM710
Inputs, outputs and control power
3-phase / single-phase •/• •/• •/• •/• •/• •/• •/• •/• •
Digital in and out / analog in and out 24 / 4 24 / 4 9/0 9/0 18 / 8 18 / 8 18 / 8 3/
Power supply options AC/DC AC/DC AC/DC AC/DC AC/DC AC/DC AC/DC AC/DC AC/DC
Power and energy measurements
V, I, F, PF • • • • • • • • •
Power, demand • • • • • • • • •
Energy / energy per shift (time-of-use) •/• •/• •/• •/• •/• •/• •/• •/ •/
Energy accuracy (%) 0.2 0.2 0.5 0.5 0.5 0.5 0.5 0.5 1.0
Standards compliance to ANSI / IEC •/• •/• •/• •/• •/• •/• •/• •/• •/•
Power quality analysis
Compliance monitoring (e.g. EN50160) • • • • • •
Flicker measurement •
High-speed transient disturbance capture •
(200 ns)
Transient disturbance capture • • • •
Disturbance direction detection • • •
Sag/swell monitoring • • • •
Harmonics measurement • • • • • • • • •
Uptime (number of 9's) calculation • • • •
Waveform capture • • • • • •
Waveshape alarm • •
Data and event logging
Trend / billing •/ •/ •/ •/ •/• •/• /•
Minimum and maximum • • • • • • • • •
Events / maintenance •/• •/• •/ •/• •/ •/ •/ •/ •/
Timestamp resolution (seconds) 0.001 0.001 0.001 0.001 1 1 1
GPS sync • • • • •
Setpoints, alarms and control
Annunciation / call out on alarm •/• •/• •/• •/• •/• •/• •/• •/
Trigger logging • • • • • • •
Trigger relay or digital ouput control • • • • • • •
Special features
Custom programming: arithmetic, boolean • •
Downloadable firmware • • • • • • • • •
Communications
Ethernet port / web / email •/•/• •/•/• •/•/• •/•/• •/•/• •/•/• •/•/•
RS485 / RS232 ports •/• •/• •/ •/ •/• •/• •/• •/ •/
Modbus protocol • • • • • • • • •
4
POWER MONITORING AND
CONTROL

4-12 PL1 Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 PowerLogic® Submetering

PowerLogic Submetering
In today's increasingly competitive commercial property market, attracting and retaining
high-quality, long-term tenants by offering exceptional value is the primary goal. Balancing
these premium services and reliable infrastructure vs. the financial exposure to volatile
utility costs is the challenge.
Minimizing energy costs requires information on how energy usage translates into money
spent. PowerLogic energy sub-metering systems are specifically engineered to address the
measurement, verification and billing needs of multi-tenant properties.
• Residential high-rise and low-rise
• Campuses
• Shopping centers
• Malls / food courts
• Offices
• Commercial buildings
PowerLogic energy management
and metering systems are ideal
for multi-tenant buildings
providing:
• Metering & Verification tools to
assure compliance to Energy
Policy Act 2005
• Integrated approach from simple
energy allocation requirements to
high-end power quality
• Monitor energy usage and
efficiency to accurately recover
the costs while providing tenants
with energy and a reliable
infrastructure
• Implement energy efficiency
initiatives essential to obtaining
LEED certification

Tenant Metering Software Solutions

PowerLogic Tenant Metering Commercial Edition Software (TMSCE) allows you to allocate
and recover the true cost of your facility’s utilities. TMSCE is designed to offer a broad
range of functionality for more demanding commercial billing applications providing the
flexibility necessary to manage a wide range of tenants, multiple locations and
comprehensive utilities.

Table 4.16:
Description Catalog No. $ Price
PowerLogic Tenant Metering Commercial Edition Software TMSCE 5880.00

PowerLogic E5600 Socket Meter

The E5600 is a cost effective socket meter that combines high accuracy, superior quality
and wide-ranging capability in a device that is simple to install. The PowerLogic E5600
socket meter can help reduce electrical costs, increase property values and attract good
tenants by providing the information needed to manage energy costs. Track and allocate
costs by circuit or suite, accurately bill tenants for energy used, and verify energy
conservation efforts. It is a foundational component for LEED and Energy Star certification
as a part of green buildings. Green buildings enjoy higher tenant retention, higher tenant
quality, and recognition by the community while typically allowing property managers to
charge more for rent.
Unlike traditional sub-metering solutions, which must be manually read or may lack
software for effective sub-billing or comprehensive energy management, the PowerLogic
E5600 enables businesses to utilize their existing S-based socket infrastructure with a
POWER MONITORING AND

low-cost meter that is part of an end-to-end solution for tenant sub-metering.

• Real, reactive, and apparent energy values.
• Onboard interval data logging (load profiles).
•
CONTROL

Revenue grade accuracy – ANSI C12.20 0.2% / 0.5%.

• Automatic configuration of service type and voltage.
• Onboard diagnostics continually monitors for equipment failures, improper installation wiring, poor
load conditions, poor power quality conditions and tampering.
• S-base meter socket compatible.
Contact your local Schneider Electric sales office for pricing and availability.
4

© 2009 Schneider Electric Discount 4-13

All Rights Reserved
PL1 Schedule
 PowerLogic® Submetering
www.powerlogic.com
FOR CURRENT INFORMATION
PowerLogic High Density Metering
High Density Metering (HDM) is engineered to answer the metering and billing needs of
multi-tenant properties:

Features and Benefits

• HDM comes standard with the PowerLogic PM210, PM750 or ION6200 meters. Please consult the
factory to discuss cabinets equipped with the PowerLogic PM800 series meters.
• Lockable, 16 gauge NEMA Type 1 enclosure provides tamper-resistant security.
• NEMA Type 3R also availalbe. Please consult factory.
• Mounting channel and surface-mount flanges simplify installation.
• Factory installed cover plates are included to cover empty meter spaces.
• Factory installed wiring harness simplifies installation of additional meters and provides future
system expansion.
• Each High Density Metering cabinet is provided with standard RS485 Modbus®, and optional
Modbus Ethernet TCP communications are availalbe. For wireless communications, please consult
factory.
• Available in the following configurations: 208Y/120V wye; 240V delta, 48 = 480Y/277V wye
(PM210/PM750), and with provided 2.5:1 CPT (control power transformer); 480Y/277V wye (6200);
480V delta (6200, PM210 or PM750).
• CTs required. Must select separately.
Table 4.17: High Density Metering Cabinet
Meter Voltage Phasing Enclosure # Enclosure
Category Description
Series Size Meters Rating
1 or 4 High Density Meter Enclosure with
ION6200 meters; ideal for outdoor as well as
High Density Metering factory assembled enclosure HDM ION6200 12, 4Ta 3 1 or 4 1-4b Rc or 1 indoor applications at all voltage levels including
for multi-tenant properties 600V delta and 347/600V wye systems
8 or 16 High Density Meter Enclosure with
12, 48, 1, 4, 8, or 1-16b
HDM PM210 1 or 3 1 PM210 meters; ideal for single or three phase
4Ta 16 indoor commercial building applications
8 or 16 High Density Meter Enclosure with
12, 48, 1, 4, 8 or
HDM PM750 3 1-16b 1 PM750 meters; ideal for 3 phase indoor
4Ta 16 commercial building applications
a Voltage Ordering Notes:
12 = 208Y/120V wye; 240V delta. 48 = 480Y/277 wye; (PM210/PM750)
4T = with provided 2.5:1 CPT (control power transformer); 480Y/277 wye (6200); 480V delta (6200, PM210 or PM750)
b Meters Ordering Notes: Please indicate the number of meters to be pre-installed when placing your order. You may
order any number of meters in the enclosure between one and the maximum number of meters each cabinet will hold.
c Please enter R as the last digit for Type 3R outdoor on 1 or 4 HDM enclosure with the 6200 series meter.

High Density Meter System includes:

• Enclosure
• Power Meters, installed
• Installation bulletin for Enclosure
8 meter configuration
• Wall hanging bracket
• Installation bulletin for Meters
Table 4.18: Accessories and Options
Description Catalog No. $ Price
Auxiliary Wiring Harness for installation of additional meters HDMPMHKIT27 221.00
(includes connectors and shorting terminal blocks)
Cover plate for empty meter base HDMCVRPLT 5.90
Water and Gas Meters Consult factory for details
50 Amp HDM Solid Core Current Transformer, 1.13” window size HDMCT050S1 35.00
100 Amp HDM Solid Core Current Transformer, 1.13” window size HDMCT100S1 35.00
125 Amp HDM Solid Core Current Transformer, 1.13” window size HDMCT125S1 35.00
150 Amp HDM Solid Core Current Transformer, 1.13” window size HDMCT150S1 35.00
200 Amp HDM Solid Core Current Transformer, 1.13” window size HDMCT200S1 52.00
250 Amp HDM Solid Core Current Transformer, 1.13” window size HDMCT250S1 52.00
400 Amp HDM Solid Core Current Transformer, 1.13” window size HDMCT400S1 52.00
POWER MONITORING

Multi Circuit Energy Meters

AND CONTROL

The PowerLogic E4000 series multi-circuit energy meters combine accurate electricity sub-
16 meter configuration metering with advanced communications technology. They are ideal for multi-tenant or
departmental metering applications within office towers, condominiums, apartment
buildings, shopping centers and other multi-point environments, metering up to 24
individual circuits from the same meter. The E4800 series has a system accuracy of 0.5%
for power and energy, including the metering class CTs. Each meter is available separately
or as part of a Scquare D integrated power center (IPC) for use in building retrofits or new
construction.
Table 4.19:
Description Catalog No. $ Price
4

Energy measurement for 24 (1CT) or 12 (2CT) single-phase circuits or 8

(3CT) 3-phase circuits; Ethernet; modem; onboard interval logging; E488010SQD Consult Factory for Pricing
compatible with 80mA low-power CTs (solid-core)
Energy measurement for 24 (1CT) or 12 (2CT) single-phase circuits or 8
(3CT) 3-phase circuits; Ethernet; modem; onboard interval logging; E483310SQD Consult Factory for Pricing
compatible with 333mV low-power CTs (solid-core or split-core)
Energy measurement for 24 (1CT) or 12 (2CT) single-phase circuits or 8
(3CT) 3-phase circuits; Ethernet; modem; onboard interval logging; E480510SQD Consult Factory for Pricing
compatible with standard 5A CTs (solid-core or split-core)
200A current transformer (CT), 80mA secondary, solid-core (1 CT) ECT80200 Consult Factory for Pricing
400A current transformer (CT), 80mA secondary, solid-core (1 CT) ECT80400 Consult Factory for Pricing
800A current transformer (CT), 80mA secondary, solid-core (1 CT) ECT80800 Consult Factory for Pricing

4-14 Discount
© 2009 Schneider Electric All Rights Reserved PL1 Schedule
 PowerLogic® Submetering

PowerLogic Energy Meter

The Energy Meter is ideal for stand-alone and systems-based submetering applications. It is easy to install and provides
exceptional metering accuracy. Available in Basic and Extended Range models. The Basic model is designed for metering
of 120/240 and 208Y/120 volt services. The Extended Range model will meter 120/240 volt up to 480 volt Wye connected
services. Extended Range meters come with pulse output and phase loss output not available on the Basic unit. Optional
Modbus® RS-485 serial communications are provided with the Energy Meter Comms Board, EMCB. Optional kW demand is
also provided by the EMCB.
Meter up to 3 individual services with one Energy Meter. The Energy Meter will allow the addition of up to 3 sets of parallel
CTs for metering multiple electric loads. Additional sets of CTs can be ordered separately. Please refer to the multiple CT
application notes in the Energy Meter instruction bulletin for the proper installation procedures.
Energy Meter
Energy Meter
Table 4.20: Basic 120/240 V to 208Y/120 V Table 4.22: Extended Range 120/240 V to 480Y/277 V
Catalog No. Description $ Price Catalog No. Description $ Price
EMB1010 Basic 100A, .518"x1.28" ID, 1 CT 426.00 EME1010 Extended Range 100A, .518"x1.28" ID, 1 CT 471.00
EMB1021 Basic 200A, 0.75” x 1.10” ID, 1 CT 440.00 EME1021 Extended Range 200A, 0.75” x 1.10” ID, 1 CT 483.00
EMB1032 Basic 300A, .90"x1.90" ID, 1 CT 482.00 EME1032 Extended Range 300A, .90"x1.90" ID, 1 CT 518.00
EMB2010 Basic 100A, .518"x1.28" ID, 2 CTs 438.00 EME2010 Extended Range 100A,n.518"x1.28" ID, 2 CTs 511.00
EMB2021 Basic 200A, 0.75” x 1.10” ID, 2 CTs 464.00 EME2021 Extended Range 200A, 0.75” x 1.10” ID, 2 CTs 536.00
EMB2032 Basic 300A, .90"x1.90" ID, 2 CTs 480.00 EME2032 Extended Range 300A, .90"x1.90" ID, 2 CTs 550.00
EMB2043 Basic 400A, 2.45"x2.89" ID, 2 CTs 505.00 EME2043 Extended Range 400A, 2.45"x2.89" ID, 2 CTs 567.00
EMB2083 Basic 800A, 2.45"x2.89" ID, 2 CTs 517.00 EME2083 Extended Range 800A, 2.45"x2.89" ID, 2 CTs 585.00
EMB3010 Basic 100A, .518"x1.28" ID, 3 CTs 750.00 EME3010 Extended Range 100A, .518"x1.28" ID, 3 CTs 811.00
EMB3021 Basic 200A, 0.75” x 1.10” ID, 3 CTs 766.00 EME3021 Extended Range 200A, 0.75” x 1.10” ID, 3 CTs 829.00
EMB3032 Basic 300A, .90"x1.90" ID, 3 CTs 799.00 EME3032 Extended Range 300A, .90"x1.90" ID, 3 CTs 864.00
EMB3043 Basic 400A, 2.45"x2.89" ID, 3 CTs 825.00 EME3043 Extended Range 400A, 2.45"x2.89" ID, 3 CTs 880.00
EMB3083 Basic 800A, 2.45"x2.89" ID, 3 CTs 855.00 EME3083 Extended Range 800A, 2.45"x2.89" ID, 3 CTs 921.00
EMB3084 Basic 800A, 2.45"x5.50" ID, 3 CTs 903.00 EME3084 Extended Range 800A, 2.45"x5.50" ID, 3 CTs 971.00
EMB3164 Basic 1600A, 2.45"x5.50" ID, 3 CTs 903.00 EME3164 Extended Range 1600A, 2.45"x5.50" ID, 3 CTs 971.00

Table 4.21: Additional CT Sets Table 4.23: Energy Meter Accessories

Catalog No. Description $ Price Catalog No. Description $ Price
EMCT010 100 A, .518” x 1.28” ID, 1 CT 92.00 EMCB Energy Meter Communication Boarda 267.00
EMCT021 200 A, 0.75” x 1.10” ID, 1 CT 99.00 EMFP1 Energy Meter Fuse Pack, Set of 1 47.00
EMCT032 300 A, .90” x 1.90” ID, 1 CT 106.00 EMFP2 Energy Meter Fuse Pack, Set of 2 94.00
EMCT043 400 A, 2.45” x 2.89” ID, 1 CT 106.00 EMFP3 Energy Meter Fuse Pack, Set of 3 142.00
EMCT083 800 A, 2.45” x 2.89” ID, 1 CT 123.00 EMBOND Energy Meter Bonding Kit 117.00
EMCT084 800 A, 2.45” x 5.50” ID, 1 CT 130.00 a Energy Meter communication board (EMCB) can be used with all
EMCT164 1600 A, 2.45” x 5.50” ID, 1 CT 130.00 models of the Energy Meter. Order one EMCB for each Energy Meter
Note: CT quantity and amperage must match meter model. Total of combined where either kW demand and/or communication is specified.
loads must not exceed rating of meter. All additional CTs shipped with 6
ft. white and black color-coded wire leads.

PowerLogic Enercept® Meter

The Enercept Meter is the ideal solution for submetering electric loads where space is at a premium. The compact design
consists of three interconnected split-core CTs with the metering and communication electronics built into the CT housing.
Simply snap on the CTs, connect the voltage inputs, the communication lines, and installation is complete. Both versions
can be connected to either three-phase or single-phase circuits.
Enercept meters employ the Modbus® RTU 2-wire communication protocol, and can utilize the same communication
network and PowerLogic System Manager™ software as other PowerLogic devices. Data from the Enercept meters can be
presented in tabular or graphical format, used for alarming and historical logging and trending, and to produce reports.
Optional Enercept Display Interface acts as a stand-alone operator interface supporting up to 32 meters (63 with a repeater).
In addition, the EDI can act as a network adapter allowing Enercept meters to be incorporated into a 4-wire network. The
Enercept Network Adapter (ENA) is designed to act as a network adapter, allowing the Enercept meters to be integrated into
Enercept Meter a PowerLogic 4-wire network. The ENA converts the signals from the 4-wire network to the 2-wire network, as well as
changing the parity between the two networks.
Table 4.24: Enercept Meter Table 4.25: Accessories
Catalog No. Description $ Price Catalog No. Description $ Price
3020B012b Basic 100A, 1.25" x 1.51" ID 776.00 ENA485 Enercept Network Adapter 471.00
3020B032b Basic 300A, 1.25" x 1.51" ID 800.00 EDI32 Enercept Display Interface 1338.00
3020B043b Basic 400A, 2.45" x 2.89" ID 823.00 2W485C 2-Wire 232-485 Conv 78.00
3020B083b Basic 800A, 2.45" x 2.89" ID 847.00 EMBK-3 Enercept Mounting Brackets (Set of 3) 75.00
3020B084b Basic 800A, 2.45" x 5.50" ID 869.00 PS24 24Vdc Power Supply (for use with EDI or ENA) 157.00
3020B164b Basic 1600A, 2.45" x 5.50" ID 893.00
3020B244b Basic 2400A, 2.45" x 5.50" ID 916.00 Table 4.26: Enercept Metering Quantities
3020E012 Enhanced 100A, 1.25" x 1.51" ID 1035.00
3020E032 Enhanced 300A, 1.25" x 1.51" ID 1066.00 Basicb Enhanced•
3020E043 Enhanced 400A, 2.45" x 2.89" ID 1097.00 kWh, kW per phase and total, min kW, max kW, kWd,
3020E083 Enhanced 800A, 2.45" x 2.89" ID 1128.00 kWh, energy usage kVAR, kVA, PF per phase and total voltage- V, L-L, L-N
3020E084 Enhanced 800A, 2.45" x 5.50" ID 1159.00 kW, real power per phase and avg. Current - A, per phase and average
3020E164 Enhanced 1600A, 2.45" x 5.50" ID 1190.00
3020E244 Enhanced 2400A, 2.45" x 5.50" ID 1221.00
POWER MONITORING AND

b See Handout / Instruction Bulletin for derating properties.

PowerLogic Split Core Current Transformers-Instrument Grade 5 Amp Split-Core Current Transformers
The 3090 SCCT series of split-core current transformers provide secondary amperage proportional to the primary (sensed)
current. For use with Circuit Monitors, Power Meters, data loggers, chart recorders and other instruments the 3090 SCCT
CONTROL

series provides a cost-effective means to transform electrical service amperages to a 0-5A level compatible with monitoring
equipment.
Table 4.27: Note: Max. Voltage without additional insulation 600Vac. Do
SA Split-Core Current not apply 600V Class current transformers to circuits having a
Transformers Catalog No. Description $ Price phase-to-phase voltage greater than 600V, unless adequate
3090SCCT022 Split Core CT - 200A (sz.2): 1.25" x 1.51 120.00 additional insulation is applied between the primary conductor
3090SCCT032 Split Core CT - 300A (sz.2): 1.25" x 1.51 120.00 and the current transformers. Square D assumes no
3090SCCT043 Split Core CT - 400A (sz.3): 2.45" x 2.89 129.00
3090SCCT063 Split Core CT - 600A (sz.3): 2.45" x 2.89 129.00 responsibility for damage of equipment or personal injury
3090SCCT083 Split Core CT - 800A (sz.3): 2.45" x 2.89 129.00 caused by transformers operated on circuits above their
3090SCCT084 Split Core CT - 800A (sz.4): 2.45" x 5.05 137.00 published ratings.
3090SCCT124 Split Core CT - 1200A (sz.4): 2.45" x 5.50 160.00
4

3090SCCT164 Split Core CT - 1600A (sz.4): 2.45" x 5.50 165.00

© 2009 Schneider Electric Discount 4-15

All Rights Reserved
PL1 Schedule
 PowerLogic® Submetering
Class 3030

PowerLogic Branch Circuit Power Meter

The Branch Circuit Power Meter (BCPM) is ideal for data center customers who are focused on eliminating costly
downtime, managing existing capacity efficiently, and reducing energy cost. The BCPM helps data center managers by
providing alarms that signify potential issues within the power system and supplying power and energy data down to
the circuit level. This data can indicate areas wither over-used or under-used within the facility. It can also be used to
effectively control energy cost.
The BCPM can monitor up to 84 circuits and fits any Power Distribution Unit (PDU) or Remote Power Panel (RPP) with
minimal space requirements. It has a wide monitoring range allowing customers to monitor circuit current from 0.25A to
100A with high accuracy (3% for current 0.25A to 2A and 2% for current 2A to 100A. It can also measure power and
energy readings at the circuit level as well as the incoming main. This eliminates the need for two different meters. The
BCPM also has a flexible numbering scheme which allows customers to match that of the PDU or RPP and field
BCM42 configuration adds ease to either a new or a retrofit installation.
Key features:
• Full PDU monitoring • Low current monitoring • Cost effective communications
• Flexible configuration • Advanced alarming • Easily integrates into a PowerLogic system or other existing
• Wide monitoring range networks using Modbus® communications

Table 4.28:
Catalog No. Description $ Price
BCPMA042D 42 circuit power and energy meter. Includes 2 CT strips, 21 CTs per strip, 3/4” CT spacing. 3569.00
BCPMB042D 42 circuit meter, measures power and energy on the mains, current per circuit. Includes 2 CT strips, 21 CTs per strip, 3/4” CT spacing. 2901.00
BCPMC042D 42 circuit current meter. Includes 2 CT strips, 21 CTs per strip, 3/4” CT spacing. 2331.00
BCPMA142D 42 circuit power and energy meter. Includes 2 CT strips, 21 CTs per strip, 1” CT spacing. 3569.00
BCPMB142D 42 circuit meter, measures power and energy on the mains, current per circuit. Includes 2 CT strips, 21 CTs per strip, 1” CT spacing. 2901.00
BCPMC142D 42 circuit current meter. Includes 2 CT strips, 21 CTs per strip, 1” CT spacing. 2331.00
BCPMA084D 84 circuit power and energy meter. Includes 4 CT strips, 21 CTs per strip, 3/4” CT spacing. 5748.00
BCPMB084D 84 circuit meter, measures power and energy on the mains, current per circuit. Includes 4 CT strips, 21 CTs per strip, 3/4” CT spacing. 4627.00
BCPMC084D 84 circuit current meter. Includes 4 CT strips, 21 CTs per strip, 3/4” CT spacing. 3495.00
BCPMA184D 84 circuit power and energy meter. Includes 4 CT strips, 21 CTs per strip, 1” CT spacing. 5748.00
BCPMB184D 84 circuit meter, measures power and energy on the mains, current per circuit. Includes 4 CT strips, 21 CTs per strip, 1” CT spacing. 4627.00
BCPMC184D 84 circuit current meter. Includes 4 CT strips, 21 CTs per strip, 1” CT spacing. 3495.00
PowerLogic Branch Current Monitor
BCM42 The Branch Current Monitor reports the current level of each of the breakers of a panelboard to provide timely circuit
loading information. In addition, as the circuit load approaches one of two user set levels, an alarm can be generated
back to the monitoring software such as PowerLogic System Manager Software. Four models of the Branch Current
Monitor are available. The BCM42 consists of rail mounted solid-core CTs intended for mounting inside new
panelboards or complete panel retrofits. The BCM42SR is designed to fit into a column width panel design. The
BCMSC model is made up of split-core CTs that are an ideal solution for retrofit applications in existing panelboards.
The BCMSC_ _ H is a 100 Amp version of the split core design.
Table 4.29:
Catalog No. Description $ Price
BCM42 Branch Circuit Monitor 42 circuits, 3/4” center line CT spacing, 10–50 Amp range, configurable 2350.00
BCM42C1 Branch Circuit Monitor 42 circuits, 1” center line CT spacing, 10–50 Amp range, configurable 2350.00
BCM42SR Branch Circuit Monitor, single row, 3/4” on center CTs 2950.00
BCM42SRC1 Branch Circuit Monitor, single row 1” on center CTs 2950.00
BCMSC12 Branch Circuit Monitor, split core, 12 CTs 1975.00
BCMSC18 Branch Circuit Monitor, split core, 18 CTs 1975.00
BCMSC24 Branch Circuit Monitor, split core, 24 CTs 2350.00
BCMSC30 Branch Circuit Monitor, split core, 30 CTs 2750.00
BCMSC42 Branch Circuit Monitor, split core, 42 CTs 3250.00
BCMSC12H Branch Circuit Monitor, 100A split core 12 CTs 2225.00
BCMSC24H Branch Circuit Monitor, 100A split core, 24 CTs 3300.00
BCMSC42H Branch Circuit Monitor, 100 split core, 42 CTs 4950.00
Note: CT hole size accommodates up to #6 THHN insulated conductor.
PowerLogic Multi-Circuit Meter
Typical BCMSC Designed for OEM style placement in electrical distribution equipment the MCM8364 is configurable to meter 1 or 3
panelboard installation phases of up to eight individual loads, six loads if neutral monitoring is required. The MCM will monitor up to 10,000
amps per service using standard 5 Amp CTs. All of the metered circuits must share a common voltage source. The
MCM8364 is a great solution for monitoring critical power distribution equipment and provides 24 different electrical
metering quantities plus an additional nine Modbus register alarms.
With one RS-485 connection, the multi-circuit meter provides Modbus RTU communications output that communicates
to each individual metered circuit. Up to 30 multi-circuit meters can be addressed on the same Modbus network. The
multi-circuit meter can provide warnings to the central monitoring computer via its Modbus output using the MNode
software provided or can be integrated into PowerLogic SMS software. The MCM also works with the submeter display
as shown below.
Electrical Data:
Energy Consumption (kWHr), Real Power (kW), Reactive Power (kVAR), Apparent Power (kVA), Power Factor Total,
Voltage, L-L, avg. of 3 phases, Voltage, L-N, avg. of 3 phases, Current, average of 3 phases, Real Power (kW) phase
A, B, & C, Power Factor, phase A, B,&C, Line to Line Voltage, phase A-B, B-C, A-C, Line to Neutral Voltage, phase
A-N, B-N, C-N, Current, phase A, B, & C, Frequency (measured from phase A) (Hz).
4

3-phase, 4-wire
(with neutral current wiring)
Modbus Alarms:
Over Voltage, Under Voltage, Over Current, Under Current, Over kVA, Under kVA, Phase Loss A, Phase Loss B,
Phase Loss C
POWER MONITORING AND

Table 4.30:
Catalog No. Description $ Price
MCM8364 Multi-Circuit Meter 8364 1863.00
PowerLogic Submeter Display
CONTROL

The PowerLogic Submeter Display (SMD) is a comprehensive electrical submetering display that provides a view of
electrical parameters from multiple metering products with one networked LCD. In addition to viewing system data on
the display itself, you can also view data on a remote PC via a network connection. Touch pad buttons provide a
convenient way to view downstream devices on the power-monitoring network. The display is RS-485 Modbus RTU
compatible. It has additional RS-485 and RS-232 Modbus ports for networking to additional displays or to a master PC.
The submeter display is compatible with the following metering devices: BCM, MCM, & Enercept® meters.
Table 4.31:
Catalog No. Description $ Price
SMD Submeter display mounted in enclosure 725.00
Submeter Display SMD OEM OEM style submeter display, no enclosure 595.00

4-16 PL1 Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 PowerLogic® Solutions for Utilities

PowerLogic Solutions for Utilities

Square D® PowerLogic delivers complete, cutting-edge web-enabled solutions for many of
the utility industry's most demanding metering, billing and information management
challenges. For many years, regulated utilities, ESCOs and deregulated energy providers
have utilized our proven, scalable meters and software to obtain the accurate, real-time
information they need to meet their organization's business goals.
Cost-effective PowerLogic systems enable energy providers to:
• Maximize competitiveness, increase reliability, streamline operations, and improve service
• Manage wholesale energy transactions across wide geographical areas
• Provide value-added services that enhance customer relationships
• Improve revenue metering, billing accuracy and ensure and report on regulatory compliance
• Provide key personnel with energy information to make analytical and strategic business decisions,
optimize distribution assets, and profit from free market opportunities
PowerLogic's advanced revenue meters are high quality, flexible and scalable devices that
offer a combination of capabilities unmatched in the industry. Whether integrated with third-
party systems or combined with compatible PowerLogic software, Square D can help
utilities address:
• Transmission grid and revenue metering
With the flexibility of ION technology, multiple form factors, PowerLogic provides high-accuracy meter information for grid-wide billing applications and offers
extensive I/O, and an unmatched feature set, the MV-90 support and integration into SCADA.
PowerLogic ION8600 is a powerful device in substation • Substation monitoring
automation, SCADA, and billing applications. A PowerLogic solution provides the tools to protect valuable equipment from faults, disturbances,
and overloading.
• Power quality analysis
Waveform recording, transient detection, sag/swell, symmetrical components and many more
additional capabilities are available when combined with PowerLogic ION Enterprise software.
• Service entrance metering
The PowerLogic ION8600 billing meter can be used to manage electricity contracts for energy
suppliers and consumers, plus web reporting, sub-metering services, load management and much
more.
• Demand response and load curtailment
PowerLogic meters and software can also be used as part of a demand response/load curtailment
system.
Square D PowerLogic utility solutions resist obsolescence and are engineered to provide
fast payback and easy scalability so you can add metering points and communications
channels as your organization evolves.
PrimeRead Software
PrimeRead software is a multi-vendor, automated data collection software for utilities that
makes data exchange with corporate IT systems for billing, operations and customer
information fast and easy. PrimeRead software offers more than just large-scale data
acquisition from commercial and industrial (C&I) metering devices though. It provides
communications network flexibility, configurable data validation and a true Windows
interface.
Multi-port, (serial, optical, internal modem, Ethernet) plus Typical applications
multi-protocol communications (Modbus RTU, Master,
Slave, DNP 3.0, Modbus TCP) and a unique gateway
• Implement C& I data collection with more flexibility, scalability and reliability
capability provide industry leading integration capability • Enable meter data management for AMI
• Perform validation, estimating and editing
For price & ordering information, contact your local PowerLogic Sales Specialist or
PowerLogic Inside Sales at 1-866-466-7627.

Analyze data from across your grid

and immediately and share it with
utility personnel, grid operators, or
energy consumers.
POWER MONITORING AND
4 CONTROL

© 2009 Schneider Electric 4-17

All Rights Reserved
 PowerLogic® PowerLogic Energy Profiler Online

PowerLogic Energy Profiler Online

PowerLogic Energy Profiler Online (EPO) is a web-hosted service that is the industry's
foremost load data visualization and analysis application. This flexible, easy to use system
turns customer usage data into actionable information, freely accessible to all customers
and internal users. For commercial and industrial energy customers, managing energy
costs is the primary objective, but they can’t control what they can’t measure. EPO enables
energy customers to take control of their costs by providing the information they need to
understand how their organization uses energy. They can then take steps to reduce costs
by implementing conservation measures, investing in more efficient equipment, or
participating in new pricing or load curtailment programs.

For the utility, EPO provides an intuitive, easy-to-maintain tool for better understanding
customer usage patterns and meeting customers’ growing need for information. It also
provides a convenient platform from which to administer real-time pricing (RTP) or load
Bill estimates provide valuable information for budgeting curtailment programs. EPO's instinctive online functionality gives first-time users an
and forecasting extremely short learning curve, while its powerful configuration options address the needs
of more sophisticated users. The service is available to users at their convenience, 24/7,
and regular updates ensure that customers get the most current information.
Key features: Applications:
• Data access and analysis • Energy load analysis
• Automated reporting • Energy budgeting and bill forecasting
• Estimated bills and rate comparisons • Demand response and load curtailment
• Demand response and curtailment programs program management
• RTP programs • Real-time pricing program management
• Alarming • EPO's Real-Time Pricing module lets users
• Administration tool see interval data for accounts with future
pricing information, and multiply that data
against a price stream.
- -

Comparison statistics display For price & ordering information, contact your local PowerLogic Sales Specialist or
PowerLogic Inside Sales at 1-866-466-7627.

Typical comparison graph showing time of usage

4
POWER MONITORING AND
CONTROL

4-18 © 2009 Schneider Electric

All Rights Reserved
 PowerLogic® Web-Enabled Network Components
Class 3030

Communications for high-speed access to critical information

From a single building to a multi-site enterprise, PowerLogic Web-Enabled Network
Components provide fast, reliable serial to Ethernet connectivity in the most demanding
applications:
• Energy management
• Power distribution
• Building automation
• Factory automation
PowerLogic Ethernet Gateways are available in two models-EGX100 and EGX400 -
EGX100 Ethernet providing direct connection to Ethernet-Modbus®/TCP networks to make energy and power
Gateway monitoring information available over local and wide area networks.
• The EGX100 provides low-cost, reliable, Ethernet to serial-line connectivity in a compact, DIN-rail
mounted package. Enabled by Power over Ethernet (PoE IEEE 802.3af), the EGX100 simplifies
installation by eliminating the need for power supplies plus provides a Web-based interface for
configuration and diagnostics.
• The EGX400 has two serial ports providing Ethernet access to 64 serial devices (more with
repeaters) and includes the ability to e-mail historical data plus provide browser-based access to
real-time and historical interval data logging/trending information allowing electrical distribution
systems to be better managed by utilizing Ethernet and Internet technologies.

Advantages
• Easy to setup—No special software required. Configuration via Microsoft Internet Explorer or
Hyperterminal.
• Easy to troubleshoot—Detailed diagnostics for communication ports through a
Web interface.
• Easy to maintain—Field upgradable firmware lets you add new features while reducing costly
downtime.
• Secure-Customizable, password-protected access to configuration.
• Cost-effective, high-speed communications—Use existing LAN infrastructure to reduce
communications wiring and network management costs.
EGX100 lets the Administrator assign access to • Open platform provides broad connectivity—Modbus TCP/IP over Ethernet allows transparent
setup pages by user groups access via intranet/internet. Each gateway supports up to 32 Modbus or PowerLogic protocol
devices.
• Subnet initiated communications—The gateway supports a slave mode for connecting a serial-line
based system to Ethernet. For example, a building management system with a Modbus serial
interface can route to 16 remote Modbus TCP/IP interfaces supporting up to 128 serial-line devices.
• Extended temperature range— -25 to 70°C enables operation in harsh environments.
Table 4.32:
Built in tabs provide easy EGX100 EGX400
DIN rail mounting solution. Type $ Price
950.00 2460.00
Control Power
24Vdc control power (from external source) x x
Power Over Ethernet x
Protocols
Ethernet: HTTP, FTP, Modbus TCP/IP, SMTP, SNMP (MIB2), SNTP, TCP, UDP, ICMP, ARP x x
Serial: Modbus RTU, Modbus ASCII (EGX100 only), JBUS, PowerLogic (SY/MAX) x x
Ports
Serial: RS485 1
Serial: RS232/485 configurable 1 1
Ethernet UTP (10/100) 1 1
Fiber (100Mb) 1
Integral web server
Web page generation tool x
Maintenance/diagnostics x x
Gateway administration setup x x
Comprehensive meter reading x
Interval logging/trends 32 devices
User defined custom pages x
Historical Data Logging
Interval data x
File transfer on scheduled basis email
Export to Excel via web query x
EGX400 Ethernet Gateway offers you a “window” into your Manual FTP x
power equipment
PowerLogic WebPageGenerator
POWER MONITORING AND

The PowerLogic WebPageGenerator (WPG) creates and downloads application specific

web pages to PowerLogic Ethernet gateways (EGX400, ECC21, PM8ECC) with minimal
user intervention. The user simply identifies the serial devices connected to the Ethernet
CONTROL

gateway in this wizard-based software utility. The utility takes care of the rest. This utility is
available for download from www.powerlogic.com.
4

© 2009 Schneider Electric Discount 4-19

All Rights Reserved
PL1 Schedule
 PowerLogic® Engineering Services

Consulting & Analysis

Power System Engineering
The Square D Power System Engineering team offers a wide range of engineering services to improve the safety,
efficiency and reliability of your power distribution system. The team is comprised of registered professional engineers,
safety trained and equipped, to perform a variety of engineering functions.
Power System Studies
The Square D Power System Engineering Team provides expertise for a variety of electrical power system studies.
Some of the more common system studies include…
• Short-circuit analysis • Harmonic analysis
• Time-current coordination • Transient analysis
• Motor starting/voltage drop • Power factor correction analysis
• Motor starting/torque-speed • Other system specific analysis
• Safe motor re-energization

Arc Flash Analysis

Square D offers on-site services to perform arc flash analysis for a facility, complex, office, or campus. An Arc flash
analysis is used to determine …
• Flash Protection Boundary • Appropriate Personal Protective Equipment (PPE)
• Incident Energy Value • Low cost arc flash reduction methods
• Hazard/Risk Category
Features of Square D arc flash analysis include…
• Time current coordination analysis showing both existing and recommended over/current device settings
• Short-circuit study to ensure adequacy of equipment
• Onsite verification and documentation of equipment
• Arc flash labels (populated with the results of the arc flash analysis)
• Arc flash label affixation
• NFPA 70E—Safe Workplace Practices Training provided by OSHA authorized outreach instructors
• Recommendations and solutions to reduce potential arc flash hazards

Power Quality Studies

Square D offers onsite power quality engineering studies and solutions to eliminate process disruptions, power system
shutdowns, and equipment damage due to electrical power system disturbances. A power quality study is used to...
• Determine compliance with the IEEE 519-Recommended Practices and Requirements for Harmonic Control in Electrical
Power Systems guidelines
• Identify most cost-effective solution to power quality problems
• Solve process disruptions due to power disturbances
• Reduce economic effects of poor power quality
• Identify disturbances originating on electric utility system and improvements to reduce the number and severity
Power System Assessment
Square D offers engineering services to meet a variety of power system needs …
• Basic codes and standards compliance • Electrical safety hazards
• Protective coordination assessment • Short-circuit withstand overview
• Maintenance program review • Single-line documentation of power system
• Recommendations for power system optimization • Power monitoring recommendations
• Power quality troubleshooting and analysis • Loading measurements
• Power factor and harmonics analysis
Power System Improvement Projects
Square D offers engineering services for …
• New equipment installation
• Existing equipment modification
• Ground Fault Schemes for multiple source distribution systems
• High Resistance Grounding (HRG) Conversion
• Automatic Transfer Control Schemes & Generator Operations
4

Square D professional engineers - safety trained and equipped - will listen to your concerns and goals, define the
problem or enhancement, and engineer the solution that best satisfies your needs.
For additional information on power system engineering services and pricing, contact your nearest
POWER MONITORING AND

Square D/Schneider Electric office.

Industrial Energy Efficiency
Schneider Electric Certified Energy Managers (CEM’s) work on-site with knowledgeable plant personnel to develop a
CONTROL

long-term, comprehensive, “Energy Action Plan”, that serves as the blueprint for energy savings. Unlike performance
contracts or one-time energy audits, the Total Energy ControlSM program offers a strategic partnership for energy-
intensive industrials who want to improve energy efficiency.
• Total Energy Control – Comprehensive integration of all three areas affecting energy efficiency
— Procurement (electricity and gas)
— Demand management
— Optimization of process and plant utilities
• Program deliverables:
— Long-term Energy Action Plan
— Energy efficiency projects
— Ongoing accountability for results

4-20 © 2009 Schneider Electric

All Rights Reserved
 PowerLogic® Engineering Services

Engineered Solutions
Schneider Electric provides an engineered solution approach to your specific power system
applications. Our total solutions for power monitoring and power system controls allow
greater safety, reliability, and energy efficiency of your power systems. As a long standing
industry leader in Power Monitoring and Control Systems, we understand your power
system requirements and needs.
All of our Engineered Solutions are tailored to your specific system requirements. Schneider
Electric is your total Solution provider.
Power Monitoring Applications
Increased Reliability and Energy Efficiency
Increased Reliability and Energy Efficiency are key results produced from our Power
Monitoring Applications. Schneider Electric power monitoring applications provide detailed
reporting, testing and analysis capabilities for your systems and related components.
• EPSS Emergency Power Supply Systems – The PowerLogic EPSS Test Report provides
information regarding the health and status of the emergency power supply system, including
automatic transfer switches and generators.
• SER Sequence of Events Recording – The PowerLogic Sequence of Events Recorder (SER)
Module is a root-cause analysis tool for rapid response for problem resolution that is ideal for
pinpointing the cause of a service disruption in very large complex power systems.
• WAGES Water, Air Gas, Electric, Steam – PowerLogic energy and power management systems
can provide instantaneous readings, alarm notifications, and graphical diagrams for monitoring
electrical and piped utilities (Water, Air, Gas, Electric, Steam).
• APM Active Pager Module – The PowerLogic Active Pager Module allows automatic paging to
alphanumeric pagers, cell phones and PCs.

Power System Control Applications

Automated solutions for increased Reliability and Energy Efficiency
Schneider Electric engineers provide Power System Control Applications with automated
solutions for addressing your system reliability and efficiency control needs. Our offer
covers Automatic Throwover Schemes, Load Shedding/Peak Shaving, and Load
Preservation.
• Automatic Throwover Systems – Automatic selection of available utility or generator sources to
maintain service continuity to connected loads.
• Load Shedding/Peak Shaving – Control peak demand levels or ensure service continuity to critical
load or operate breakers in accordance with user specified sequences and time delays such as
bringing large motors online across several billing kw demand periods to avoid demand penalties.
• Load Preservation – Fast acting sophisticated control systems designed to stabilize critical power
PowerLogic Engineers provide graphic solutions systems to the greatest extend possible by monitoring frequency and power sources from utility plus
for realtime monitoring of power systems. generator capacity versus total circuit load.

System Integration
System Design and Engineering
Our Square D Engineering Services solution specialists can work with you to design or
upgrade your existing system to best achieve your energy and power management
objectives and informational needs. With expertise in electrical systems, communications,
and automatic control systems, we can integrate, install, and commission your system for
optimal performance.
• System Design and Bill of Material Recommendations
• Power Monitoring and Control
• WAGES (Water, Air, Gas, Electric, Steam)
• Enterprise web-based monitoring
• Specification development, drawings, documentation
• Enclosure panel design and build
• Metering Connection Verification/Testing
• Power distribution automation
PowerLogic Engineers specialize in the • On-Site Installation Assistance, Component Configuration & Startup
design and setup of Emergency Power • Turn-key project management
Supply Systems (EPSS). • Third Party Device and communication interfaces
• Configured Workstations, User Software Interfaces
• Interactive Graphic Design to mimic facility layout, one-lines, equipment status
• Custom Software, Reports & Applications – Billing and Paging
POWER MONITORING AND

For additional information, contact your nearest Square D / Schneider Electric office.
CONTROL

PowerLogic Engineers design power

control systems that meet your
operational requirements.
4

© 2009 Schneider Electric 4-21

All Rights Reserved
 PowerLogic® Engineering Services

Factory Assembled Enclosures

Square D® PowerLogic® Factory Assembled Enclosures offer a wide range of designs for
metering, communications, and control applications to simplify retrofit installations. Our
enclosures are designed to order as a free-standing or wallmounted system. With
PowerLogic® Factory Assembled Enclosures, you’ll receive professionally crafted, factory
tested, pre-wired enclosures that will greatly improve the speed of your system startup. All
backed by the Square D® quality standard of excellence.
• Assemblies include meters & devices wired to terminal blocks, disconnects and shorting blocks
• Tailored to any system voltage :
— 208/120V, 480/277V & 600/347V Wye
— 240V, 480V & 600V Delta
— Utilization of PT's required for higher voltage levels
• Wall mountable and easy to install using concealed holes in the back of the enclosure.
• Complete with necessary documentation and mounting hardware for quick and easy installation
• Carbon steel construction, with industry standard ANSI 61 gray powder coat finish
• Equipped with concealed hinged door, and universal pad-lockable latch.
• Custom engraved nameplates available for all units.
Table 4.33: Industrial Enclosure Types 12, & 4, UL & CUL 508A Listed
Available Meter Types Digital Inputs Digital Outputs Analog Inputs Analog Outputs
PM 810, 820, 850 & 870 Up to 11 / Meter Up to 7 / Meter Up to 2 / Meter Up to 2 / Meter
CM 3250 & 3350 Up to 4 / Meter Up to 5 / Meter N/A N/A
CM 4250 & 4000T Up to 8 / Meter Up to 7 / Meter Up to 1 / Meter Up to 1 / Meter
ION 6200 N/A Up to 2 / Meter N/A N/A
ION 7300, 7330 & 7350 Up to 4 / Meter Up to 4 / Meter Up to 4 / Meter Up to 4 / Meter
ION 7550 & 7650 Up to 16 / Meter Up to 7 / Meter Up to 4 / Meter Up to 4 / Meter
• Supports Single or Multiple Voltage Sources for Indoor (Type 12) & Outdoor (Type 4) applications
• Available with 1 - 4 meters per panel. Serial & Ethernet Communications are options for all units
• EGX & ION RTU Communication Enclosures with 1-4 devices per panel also available

Light Industrial Enclosure Type 1, UL & CUL 508A Listed

• Available for the following meter types: PM210, PM710, PM820 (with ethernet), and ION6200
• Supports Single Voltage Source only for Indoor (Type 1) applications.
• Available with 1 - 12 meters per panel. Serial Communications are standard for all units.
• No Digital or Analog I/O is available for this option.

Service Entrance/Utility Socket Enclosure Type 3R, UL & CUL 508A Listed
• Available for ION8600 only, with up to 3 Digital Inputs and 4 Digital Outputs
• Supports Single Voltage Source only for Indoor & Outdoor (Type 3R) applications.
• Units are Ring Type with removable cover.
• Available with 1 meter per panel. Serial & Ethernet Communications options available.
• Supports Form 9S, 35S, 36S, 39S and 76S configurations.
• Options available for remote mounted CTs
• Options available for integrated, bar type CTs
• Optional Test Switch.

Additional engineered to order products are available for a wide variety of

design solutions.
• Switchgear Transfer Control Panels
• Generator Control Panels
• Load Shed Control Panels
• Sequence of Events Recording (SER) Panels
• Control System Mimic Panels
• Lighting Control Interface Panels
• Programmable Logic Controller (PLC) Control Panels (Hot Standby, Relay Control, Data
Concentration etc. ...)
• Emergency Power Supply Systems (EPSS) Control Panels
• Water, Air, Gas, Electrical, and Steam (WAGES) Monitoring Panels
• Input Status Monitoring & Alarming Panels
• Remote Annunciator Control Panels
• Remote Operator Control Panels
•
4

Serial, Ethernet, and Cellular Wireless Systems

• Server Rach and Network Equipment (Servers, Switches, UPS’s) for Energy Management Systems.
• Industrialized PC’s, Touch Screens (Magelis), and Human Machine Interfaces (HMI’s) with Custom
System Graphics.
POWER MONITORING AND

• Designed to fit any environment – Indoor (Type 1 & 12) & Outdoor (Type 3R & 4) applications
For additional information and pricing please contact your local PowerLogic sales
specialist or PowerLogic Inside Sales Support at 1-866-466-7627. Enclosure pricing
CONTROL

and literature available for download on our website at

www.powerlogic.com/products/enclosures.
To better serve you please have the following information on hand when calling.
• Enclosure type (Indoor or Outdoor) and Environment details (Corrosive or Non-Corrosive)
• Power System Voltage Level and Type (Direct Current (DC) or Alternating Current (AC))
• Digital & Analog Input and Output requirements
• Device Type and Quantity per enclosure
• Ethernet and Serial Communication Requirements
• For Drawout Retrofits, need existing cradle type (i.e. GE, Westinghouse, etc.)

4-22 © 2009 Schneider Electric

All Rights Reserved
 PowerLogic®
Engineering Services
Technical Support
There are several ways to receive top quality support on PowerLogic products:
Priority Support: Excellent Service, Free Software Upgrades, Training Discounts & More!
• Latest PowerLogic SMS and ION software upgrades to ensure up-to-date systems
• Direct access to expertise for quick issue resolution
• More efficient PowerLogic SMS and ION system utilization
• Higher reliability
• Improved productivity and personal efficiency on the job

Priority Support: Tenant Metering

Now the great support provided to SMS and ION systems is now available for Tenant Metering
systems. Support includes ...
• Direct email (4-hr response time) and toll-free 800 number support for prompt response to urgent or
non-urgent requests from highly trained support engineers.
• Hours of service 7:30am to 7pm US Central time
• PowerLogic® Tenant Metering software upgrades at no charge
• Proactive notification of software service packs and fixes
• Remote diagnostics support engineer can troubleshoot any issues of the TMS system remotely without the
customer’s help.

Premium Support: Priority + Proactive System Checks + Remote eServices

Sr. Technician Assigned to your site Let expert Square D technicians ensure high-quality
Choose Premium Support when you need to . . . performance in your PowerLogic SMS and ION
• Enhance your PowerLogic SMS and ION system's operation with single-sourced pro-active problem system by performing remote, online services through
identification, solutions recommendations and change management skills our secure WEB EX Portal. Services include …
• Partner with technical experts who help coordinate support, provide hands-on assistance, and share
• Installations, upgrades, & software patches
knowledge and know-how with you • System device setup & configuration along with
alarming & historical trending
• Obtain personalized services tailored to your business environment
• Graphical Screen Development
and objectives
• Take advantage of remote software upgrade capabilities • Remote, Online System Maintenance
• Anticipate and communicate necessary change — Software Updates - Patches & Upgrades
— PC Checks - Hard Disk Space, Network &
Additional Support Options: DB Configurations, Viruses, etc.
7x24 Support Option — PowerLogic or ION Software Checks -
Communications, Data Logging, & Task
• PowerLogic 7x24 support provides 1-hour phone response by senior support engineer during off-hours. Execution
• Additionally, 4-hour response (max) for remote connection to customer system for advanced — E-mailing system scorecard & maintenance
troubleshooting. recommendations
Real Time Maintenance Option • One-on-one training on system software features
• Power Quality (PQ) & Energy Usage Analysis
Real time maintenance provides real-time server monitoring to proactively alert assigned
PREMSUP engineer of any issues immediately.
On-Site Maintenance Option
On site maintenance includes pre-scheduled visits by PowerLogic system engineers who
perform software upgrades, updates to custom graphic screens, device firmware upgrades, and
system performance analysis and correction. Scope of work is determined by customer request.
Power Management University
Our training centers offer a variety of training courses designed to improve your total energy management skills. Our instructor led courses are 70%
hands-on, with each student having their own lab workstation. We have two main training centers located in Nashville, TN and Victoria, BC and
offer training at a variety of Square D sites across the US and Canada.
Table 4.34:
Course Course No. $ Tuition
PowerLogic SMS Systems
Correspondence Courses
PowerLogic Fundamentals 3000PLUC120CR 350.00
PowerLogic SMS Core Classes
PowerLogic SMS fundamentals 3000PLUC200 2150.00
PowerLogic SMS fundamentals Bundle (Includes 3000PLUC120CR) 3000PLUC205 2350.00
PowerLogic System Installation & Troubleshooting 3000PLUC100 2150.00
PowerLogic SMS Administrator 3000PLUC300 2150.00
Target Application Courses
Critical Power and Power Quality 3000PLUC140 1400.00
POWER MONITORING AND

Energy Management with Advanced Reporting 3000PLUC230 1400.00

Regional SMS Overview 3000PLUC190 1800.00
SEPAM Industrial M.V. Relay Applications 3000PLU1SEP 2150.00
Regional SMS Overview Bundle (Includes 3000PLUC120CR) 3000PLUC195 2050.00
CONTROL

Customer Site Training 3000PLUCSite By Quote

System Manager Customer Site Training 3000PLUCSITE By Quote
PowerLogic ION Systems
PowerLogic ION Core Classes
PowerLogic ION Enterprise Fundamentals 3000PMUFUND 2150.00
PowerLogic ION Enterprise Programmer 3000PMUPROG 2150.00
PowerLogic ION Enterprise Administrator 3000PMUADMIN 2150.00
PowerLogic ION Enterprise Overview 3000PMUCION 1200.00
PowerLogic ION Program Overview 3000PMUCPROG 1200.00
PowerLogic ION Enterprise Customer Site Training 3000PMUSITE By Quote
PowerLogic ION Enterprise Refresher 3000PMUREFRESH 1800.00
4

© 2009 Schneider Electric Discount 4-23

All Rights Reserved
PL1T Schedule
 Sepam™ Series Digital Protective Relay

80, 40, and 20 Series Sepam Series 80 Relay Features

The Sepam family of digital protection relays, Series 20, • Standard footprint for enhanced protection of Mains/Feeders,
40 and 80, is the newest generation of Sepam relay, a Transformer, Motor, Generator, Capacitor, Bus Applications
time tested product with a 20-year worldwide history. • Differential protection of transformer or machine transformer
Modular relay design allows quick and easy future units
upgrades to communications, digital I/O, analog output or • Differential protection of motors and generators
temperature acquisition. The 64x128 bit, graphic LCD • Protection for mains and ties and important feeders including
display and keypad permit relay setting of Series 20 and pre-programmed transfer schemes
40 without a PC. Comprehensive self-testing provides • Increased metering capabilities I, V, E, P, PF, THD, vector
Series 80 assurance of readiness to protect. The Sepam family also diagram
has exceptional withstand to environmental
Advanced Display
electromagnetic disturbances. An optional 128 x 240 LCD • Expanded logic equation capabilities (an option for Logipam
(A Suffix) PLC ladder logic)
display for the Series 80 relay can show an animated
one-line with front panel control. • Setting software with graphical assistance, optional
mimic-based display
• Battery backup for historical and fault waveform data
Table 4.35: Quick Select Guide retention, wide range DC control power
• Two rear communication optional

Capacitor Bank
Feeder or main
• Includes all Series 20 and Series 40 features

(Substation)
Transformer

Generator
Motor

Bus
Sepam Series 40 Relay Features
• Compact standard footprint (< 4”deep) for enhanced
Criteria Selection protection of Mains/Feeders, Transformer, Motor, Generator
Radial Applications
S23 T23 M20 G40 B80 C86
(51, 51N, 46) • Directional overcurrent protection for dual mains and ties and
Long feeders (67N) S41 M41 closed loop feeders
Network Closed loop
(67N, 67) S42 • Current and voltage inputs I, V, E, P, PF
structure
Parallel mains [transf]
• Setting software with Boolean logic equation assistance
[sources] (67N, 67) S42 T42 G82 • CT/VT and Trip Circuit supervision
Series 40 Sync-check required S82 T82 G82 B80 • Sixteen seconds of fault recording, last 5 trip reports, and last
(25)(67N, 67) 200 time-tagged alarms
Advanced Display
Solid or low/high
(A Suffix)
Grounding impedance (51N) S23 T23 M20 G40 • Rear communication port for interface to optional
system Ungrounded or communications modules
S41 T42 M41 G82
compensated (67N/NC) • Includes all Series 20 features
Basic Feeder
[Transf][Motor] S23 T23 M20 G40

Voltage/frequency S40 T40 M41 G40 B21 Sepam Series 20 Relay Features
(27/59/81)
ROCOF (81R) S84 B22 • Backlit LCD graphic bitmap display
Advanced Fdr/Main[Transf] S41 T82 M81 G82 B83
• Compact standard footprint (< 4”deep) for basic protection of
[Motor][Gen] Mains/Feeders, Transformer, Motor, Bus (Voltage)
Protection Thermal overload (49)- S81 Applications
cable
Thermal O/L
• 16 inverse time overcurrent characteristic curves
(49)- capacitor bank C86 • Setting software with offline file creation and
Differential (87T) T87 download to relay
Machine M87 G87
• Two 86 cycle records of fault recording, last trip fault values,
differential (87M) and last 64 time-tagged alarms retained
Machine-
transformer unit differential M88 G88 • Provides trip diagnostic information for analysis of faults
• Self-test diagnostic ensures correct operation of relay and
I S23 T23 M20 integrity of protection
V, f B21 • Wide range of control power inputs
Metering
I, V, f, P, E S40 T40 M41 G40 B80 • Display operation minimal training required for operation.
Series 20 I, V, V, f, P, E B83 • Application specific design for Main/Feeder, Transformer,
Advanced Display I, I, V, F, P, E T87 M87 G87 Motor, Bus (Voltage) zones
(A Suffix) THD-I, THD-V S80 T81 M81 G82 B80 • Zone selective interlocking (ZSI) improved protection
<8 RTDs of same type T23 M20 G40 coordination
Temperature > 8 RTDs (< 16) or 2 types
of RTDs T40 M41 G40 • Rear communication port for interface to optional Modbus
< 10 I / 8 O S23 T23 M20 G40 B21
communications modules, plus dual port module, optional
I/Os protocols DNP3 and IEC60870-5-103, and also fiber optics
> 10 I / 8 O and < 42 I / 23 O S80 T81 M81 G82 B80
Control matrix S23 T23 M20 G40 B21
• Modular architecture
Program logic Logic equation editor S40 T40 M41 G40 B80 • Breaker diagnostics
customization
Ladder-logic software S80 T81 M81 G82 B80 • Two groups of current protection settings (logic input
4

1 Modbus port S23 T23 M20 G40 B21 selectable) to allow reduced arc-flash hazard during
Modbus
communication 2 Modbus ports S80 T81 M81 G82 B80
maintenance operation

Note: Units in table depict least complex device types compliant with
POWER MONITORING AND

criterion.
CONTROL

4-24 © 2009 Schneider Electric

All Rights Reserved
 Sepam Series Selection Table

Table 4.36: Series 80 Applications

Application
Protection S80 S81 S82 S84 T81 T82 T87 M81 M87 M88 G82 G87 G88 B80 B83 C86
ANSI Code
Phase overcurrenta 50/51 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
50N/51N
Ground fault / Sensitive ground faulta 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8
50G/51G
Breaker failure 50BF 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Negative sequence / unbalance 46 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Thermal overload for cables 49RMS 2 2 2
Thermal overload for machinesa 49RMS 2 2 2 2 2 2 2 2 2
Thermal overload for capacitors 49RMS 2
Capacitor bank unbalance 51C 8
Restricted ground fault 64REF 2 2 2 2 2
Two-winding transformer differential 87T 1 1 1
Machine differential 87M 1 1
Directional phase overcurrenta 67 2 2 2 2 2 2 2
Directional ground faulta 67N/67NC 2 2 2 2 2 2 2 2 2 2 2 2
Directional active overpower 32P 2 2 2 2 2 2 2 2 2 2 2 2
Directional reactive overpower 32Q 1 1 1 1 1 1
Directional active underpower 37P 2 2
Phase undercurrent 37 1 1 1
Excessive starting time, locked rotor 48/51LR 1 1 1
Starts per hour 66 1 1 1
Field loss (underimpedance) 40 1 1 1 1 1 1
Pole slip 78PS 1 1 1 1 1 1
Overspeed (2 set points)b 12 e e e e e e
Underspeed (2 set points)b 14 e e e e e e
Voltage-restrained overcurrent 50V/51V 2 2 2
Underimpedance 21B 1 1 1
Inadvertent energization 50/27 1 1 1
Third harmonic undervoltage/100% stator ground fault 27TN/64G2/64G 2 2 2
Overfluxing (V / Hz) 24 2 2 2 2
Positive sequence undervoltage 27D 2 2 2 4 2 2 2 2 2 2 2 2 2 4 4 4
Remanent undervoltage 27R 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Undervoltage (L-L or L-N) 27 4 4 4 2 4 4 4 4 4 4 4 4 4 2 2 2
Overvoltage (L-L or L-N) 59 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Neutral voltage displacement 59N 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Negative sequence overvoltage 47 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Overfrequency 81H 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
Underfrequency 81L 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4
Rate of change of frequency 81R 2
Recloser (4 cycles)b 79 e e e e
Thermostat / Buchholzb 26/63 e e e e e e e
Temperature monitoring (16 RTDs)c 38/49T e e e e e e e e e e
Synchronism-checkd 25 e e e e e e e e e e e e

Table 4.37: Series 40/20 Applications

Application ANSI
Protection S23 S40 S41 S42 T23 T40 T42 M20 M41 G40 B21 B22
Code
Phase overcurrenta 50/51 4 4 4 4 4 4 4 4 4 4
Voltage-restrained overcurrent 50V/51V 1
50N/51N
Ground fault / Sensitive ground faulta 4 4 4 4 4 4 4 4 4 4
50G/51G
Breaker failure 50BF 1 1 1 1 1 1 1 1 1
Negative sequence / unbalance 46 1 2 2 2 1 2 2 1 2 2
Directional phase overcurrenta 67 2 2
Directional ground faulta 67N/67NC 2 2 2 2
Directional active overpower 32P 1 1 1 1
Directional reactive overpower 32Q/40 1 1
Thermal overloada 49RMS 2 2 2 2 2 2
Phase undercurrent 37 1 1
Excessive starting time, locked rotor 48/51LR/14 1 1
Starts per hour 66 1 1
Positive sequence undervoltage 27D/47 2 2
Positive sequence undervoltage 27D 2
Remanent undervoltage 27R 1 1 1
Phase-to-phase undervoltage 27 2 2
Phase-to-neutral undervoltage 27S 1 1
POWER MONITORING AND

Undervoltage 27/27S 2 2 2 2 2 2 2
Overvoltage 59 2 2 2 2 2 2 2 2 2
Neutral voltage displacement 59N 2 2 2 2 2 2 2 2 2
Negative sequence overvoltage 47 1 1 1 1 1 1 1
CONTROL

Overfrequency 81H 2 2 2 2 2 2 2 1 1
Underfrequency 81L 4 4 4 4 4 4 4 2 2
Rate of change of frequency 81R 1
Recloser (4 cycles) 79 e e e e
Temperature monitoring (8 or 16 RTDs)a 38/49T e e e e e e
Thermostat / Buchholzb 26/63 e e e
Note: Numerals in table indicate number of protection setpoints
a Protection functions with 2 groups of settings
b Requires MES120 I/O module
c Requires MET1482 RTD Input module
d Requires MCS025 synch check module
e Option
4

© 2009 Schneider Electric 4-25

All Rights Reserved
 Sepam Series Pricing and Accessories

Table 4.38: List Price by Catalog Numbera

Model Application Catalog No. $ Price Model Application Catalog No. $ Price
S80 - Substation/feeder [current & voltage] SQ1S80A 3870.00 S40 - Substation/feeder [current & voltage] SQ1S40A 3023.00
S81 - Substation/feeder [directional grd O/C] SQ1S81A 4060.00 S41 - Substation/feeder [directional grd O/C] SQ1S41A 3439.00
S82 - Substation/feeder [directional ph & grd O/C] SQ1S82A 4180.00 S42 - Substation/feeder [directional ph & grd O/C] SQ1S42A 3870.00
S84 - Substation/main [separation/ load shed] SQ1S84A 4780.00 Series 40 T40 - Transformer [current & voltage] SQ1T40A 3272.00
T81 - Transformer [current & voltage] SQ1T81A 4130.00 T42 - Transformer [Dir. Ph & Grd O/C] SQ1T42A 4118.00
T82 - Transformer [Dir. Ph & Grd O/C] SQ1T82A 4430.00 M41 - Motor [Dir. Grd O/C] SQ1M41A 3594.00
T87 - Transformer [Diff.-2 wdg) SQ1T87A 4880.00 G40 - Generator [Dir. Real & Reac Power, Volt-Restr O/C] SQ1G40A 3920.00
M81- Motor [Dir. Grd O/C] SQ1M81A 3540.00
Series 80 M87- Motor [Mach. Diff.] SQ1M87A 3850.00 S23 - Substation/feeder [breaker failure] SQ1S23A 1794.00
M88 - Motor [Transf. Diff.] SQ1M88A 4140.00 T23 - Transformer [breaker failure] SQ1T23A 1957.00
G82 - Generator [Dir. Watt & Var, Volt-Restr O/C] SQ1G82A 4170.00 M20 - Motor SQ1M20A 2319.00
G87 - Generator [Mach diff] SQ1G87A 4520.00 B21 - Bus (Voltage/Freq) SQ1B21A 2264.00
G88 - Generator [Transf diff] SQ1G88A 5522.00 Series 20 B22 - Loss of Mains (Voltage/Freq/ROCOF) SQ1B22A 2576.00
B80 - Bus [Main+1ph volt] SQ1B80A 4050.00
B83 - Bus [Tie +3ph volt] SQ1B83A 4250.00
C86 - Capacitor [4 step 2xWye banks] SQ1C86A 4125.00
a Replace “A” suffix with “P” to select the “Pro” version mimic display. (add $450 to list price)

Table 4.39: Series 80+40+20 Accessory List

Accessory Type Series 80 Series Catalog No. Description $ Price
40/20
x MES120 14 inputs + 6 outputs / 24-250Vdc 770.00
x MES120G 14 inputs + 6 outputs / 220-250Vdc/hi p.u. 770.00
x MES120H 14 inputs + 6 outputs / 110-125 Vdc/hi p.u. 770.00
Digital I/O Module x MES114 10 Input / 4 output module 616.00
x MES114E 10 inputs + 4 outputs 110/125V 595.00
x MES114F 10 inputs + 4 outputs 220/250V 785.00
x x ACE959 RS485 4-wire Interface Module (requires. ext. 24VDC control pwr) 398.00
x x ACE9492 RS485 2-wire Interface Module (requires. ext. 24VDC control pwr) 398.00
Communication I/Fb Module x x ACE937 Fiber optic Interface Module 578.00
x x ACE969TP2 (2)RS485 2wire I/F 578.00
x x ACE969FO2 (1) RS485 2wire + (1) F/O I/F 771.00
x MCS025 Synch check module (includes cable CCA785) 1410.00
x x MET1482 8 temperature sensor input module 695.00
Other option modules, x x MSA141 Analog output module 637.00
software, mounting plates x x DSM303 Remote advanced MMI (requires cable CCA77x see below) 719.00
x SFT080 Logipam plc logic software 750.00
x AMT840 Assembly plate for surface mounting of MCS module 131.00
x x CCA770 2ft cable from remote display to base unit 36.20
Analog I/O Cables x x CCA772 2m cable from remote display to base unit 51.00
x x CCA774 4m cable from remote display to base unit 78.00
x x CSH30 Interposing window CT for Residual current input 116.00
x x CSH120 Ground Sensor CT - 120 mm window 235.00
Ground Sensor CTs (mV out) x x CSH200 Ground Sensor CT - 200 mm window 378.00
x x ACE990 Aux. CT for Ground Sensor CT Ratio Adjustment (for retrofit) 709.00
Configure softwarec x x SFT2841KIT Setting/operating software kit (including SFT2826 osc s/w+CCA783 cable) 543.00
x x 2640KIT Terminal blocks for MES modules 205.00
x x CCA634 1 or 5 A CT Current Connector 191.00
x x CCT640 Voltage Connector 398.00
x x CCA612 Cable for communication module to relay connection 67.00
Selected sparesd x x CCA783 Cable for pc to relay connection 67.00
x CCA785 MCS025 cable 55.00
x CCA670 LPCT Current Connector 430.00
x CCA671 LPCT Current Connector 415.00
b Includes CCA612 cable to relay rear port
c One s/w kit required per Series 80 order and recommended per Series 40/20 order
d To be ordered as spare or replacement
4
POWER MONITORING AND
CONTROL

4-26 PL1 Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 Sepam Series
Selection Example

Series 20 and Series 40

Series 80

Table 4.40: Selection Example

Follow these steps: Example:
Selection Sequence Type Part QTY Catalog No. Description $ Price
[1] Select from Table 4.35 per system, features Table 4.32 & 4.33/4.34 Relay unit 1 SP1T87A T87- Transformer [Diff.-2 wdg) 4880.00
POWER MONITORING AND

[2] Spare by application Memory module 0 MMS020xxx Spare memory module 0.00
[3] Select from Table 4.36 (as required) Digital I/O 1 MES120 14 inputs + 6 outputs / 24-250Vdc 770.00
[4] Select from Table 4.36 (as required) Communication module 1 ACE959 RS485 4-wire Interface Module l 398.00
[5] Select from Table 4.36 (as required) RTD Input 1 MET1482 8 temperature sensor input module 695.00
CONTROL

[6] Select from Table 4.36 (as required) Analog output 0 MSA141 Analog output module (1 channel) 0.00
[7] Select from Table 4.36 (as required) Sync check (25) module 1 MCS025 Synch check module (includes cable CCA785) 1410.00
[8] Select from Table 4.36 (as required) Config S/W 1 SFT2841KIT Setting / operating software kit 543.00
[9] Select from Table 4.36 (as required) Cable for RTD I/F Modulle 1 CCA772 2m cable from remote display to base unit 51.00
4

© 2009 Schneider Electric Discount 4-27

All Rights Reserved
PL1 Schedule
 PFC Capacitors
Class 5810 www.reactivar.com
FOR CURRENT INFORMATION
Low Voltage Fixed Capacitors ReactiVar® fixed low voltage capacitors are ideally suited for power
factor correction applications where the load does not change or where
the capacitor is switched with the load, such as the load side of a motor
starter. ReactiVar fixed capacitors are best suited for applications where
there are no harmonic currents or voltages present.
Features:
• Environmentally friendly: ReactiVar capacitors are constructed with a dry
Fixed type metalized polypropylene capacitor element with no liquid dielectrics.
Capacitors are There is no risk of fluid leakage or environmental pollution and no need for a
best suited for drip pan.
use on • Higher overvoltage limit on Super Duty model which is suitable for lightly
electrical polluted network.
systems with
no voltage or
• Low Loss, Long Life: The design features less than 0.5W/kVAR losses,
including discharge resistors.
current
harmonics. • Attractive finish: Capacitor units feature a textured powder paint finish, ASA
61 gray. Units are constructed of 14 gauge steel and are suitable for floor or
wall mounting.

Application Note: Capacitors are a low impedance path for the harmonic currents and voltages in the electrical network. This amplification can cause
produced by variable frequency drives, motor soft starters, welders, computers, nuisance fuse operation and/or damage to electrical equipment
PLCs, robotics and other electronic equipment. These harmonic currents can be including capacitors and other electronic devices. If power factor
drawn into the capacitor causing it to overheat, shortening its life. Furthermore, the correction in the presence of harmonics is required, please contact
resonant circuit formed by shunt capacitors coupled with system inductances your nearest Square D/Schneider Electric sales office for
(motors and transformers) can amplify harmonic currents assistance.
Table 4.41: Unfused 480V 3 phase/60 Hz Unit
Recommended copper Recommended circuit protection device
Kvar rating Regular duty Indoor NEMA 1 unit Rated Current wire sized ratinga
at 480V Catalog number $ Price Enclosurebc at 480V AWG Fuse Circuit breaker
6 PFCD4006 929.00 1 7.2 14 15 15
8.5 PFCD4008 1022.00 1 10.2 12 20 15
10 PFCD4010 1077.00 1 12 12 25 20
12.5 PFCD4012 1215.00 1 15 10 30 25
15 PFCD4015 1329.00 1 18 10 40 25
16.5 PFCD4017 1374.00 1 19.8 8 40 30
20 PFCD4020 1479.00 1 24 8 50 35
25 PFCD4025 1655.00 1 30 6 60 45
27.5 PFCD4027 1754.00 1 33 6 70 50
30 PFCD4030 1851.00 1 36 6 75 50
33 PFCD4033 1953.00 1 39.6 6 80 60
35 PFCD4035 2102.00 2 42 4 90 60
40 PFCD4040 2358.00 2 48 4 100 70
45 PFCD4045 2519.00 2 54 4 110 75
50 PFCD4050 2676.00 2 60 3 125 90
60 PFCD4060 3975.00 2 72 2 150 100
65 PFCD4065 4200.00 2 78 1 175 110
70 PFCD4070 4280.00 3 84 1 175 125
75 PFCD4075 4434.00 3 90 1/0 200 125
80 PFCD4080 4695.00 3 96 1/0 200 150
90 PFCD4090 5217.00 3 108 2/0 225 150
100 PFCD4100 5738.00 3 120 2/0 250 175
125 PFCD4125 7148.00 4 150 250 300 225
150 PFCD4150 8556.00 5 180 300 400 250
175 PFCD4175 9561.00 5 210 400 450 300
200 PFCD4200 10565.00 5 240 500 500 350

Table 4.42: Super duty unfused 480V 3 phase/60 Hz unit

Recommended copper Recommended circuit protection device
Kvar rating Super duty Indoor NEMA 1 unit Rated Current wire sized ratinga
at 480V Catalog number $ Price Enclosurebc at 480V AWG Fuse Circuit breaker
6 PFCDS4006 1394.00 1 7.7 14 15 15
8 PFCDS4008 1537.00 1 10.4 12 20 15
9.5 PFCDS4010 1621.00 1 11.5 12 25 20
13 PFCDS4013 1828.00 1 15.4 10 30 25
16 PFCDS4016 2000.00 1 19.2 8 40 30
4

17.5 PFCDS4017 2113.00 1 20.8 8 45 30

20 PFCDS4020 2225.00 1 23.1 8 50 35
22.5 PFCDS4022 2358.00 2 26.9 8 60 40
25 PFCDS4025 2490.00 2 30.8 6 60 45
POWER MONITORING AND

27.5 PFCDS4027 2785.00 2 33.5 6 70 50

30 PFCDS4030 2938.00 2 36.2 6 75 60
35 PFCDS4035 3162.00 2 42.3 4 90 70
40 PFCDS4040 3547.00 2 49.3 4 100 80
45 PFCDS4045 3789.00 3 53.9 4 110 80
CONTROL

50 PFCDS4050 4026.00 3 61.6 3 125 90

60 PFCDS4060 5979.00 4 73.1 2 150 110
70 PFCDS4070 6438.00 4 84.7 1 175 125
75 PFCDS4075 6670.00 4 90.1 1/0 200 150
80 PFCDS4080 7062.00 5 97.8 1/0 200 150
90 PFCDS4090 7848.00 5 107.8 2/0 225 175
100 PFCDS4100 8675.00 5 120.9 3/0 250 200
115 PFCDS4115 10034.00 5 138.6 4/0 300 225
a Consult local electrical codes for proper sizing of molded case circuit breaker frame or
disconnect switch rating.
b Unit size 1, 2 and 3 can be wall mounted. Order PFCDBR2 mounting bracked separately.
c Refer to table 4-45 for dimensions.
d Conductor should be copper and rated 90° C min. Refer to local electrical codes for proper
wire size.
4-28 DE2C Discount © 2009 Schneider Electric
Schedule All Rights Reserved
 PFC Capacitors Class 5810
www.reactivar.com
FOR CURRENT INFORMATION
LV Fixed Fused Capacitors with Blown Fuse Indicators
In addition to the comprehensive Multiple Protection System designed into the New ReactiVar® fixed, low voltage
capacitors, fused units feature a fast acting current limiting fuse in each phase. Blown fuse indicators are included as
standard on indoor (NEMA Type 1) enclosure. While fuses are not required to protect the capacitor elements, external
over current protection may be required by the local electrical code for protection of the conductors feeding the
capacitors. Consult your local electrical code for installation instructions.
Table 4.43: Fused 480V 3 phase/60 Hz unit
Recommended Recommended circuit protection
Kvar rating Regular duty Indoor NEMA 1 unit Rated Current copper wire sized device ratinga
at 480V Catalog number $ Price Enclosurebc at 480V AWG Fuse Circuit breaker
6 PFCD4006F 1209.00 1 7.2 14 15 15
8.5 PFCD4008F 1302.00 1 10.2 12 20 15
10 PFCD4010F 1361.00 1 12 12 25 20
12.5 PFCD4012F 1497.00 1 15 10 30 25
15 PFCD4015F 1611.00 1 18 10 40 25
16.5 PFCD4017F 1658.00 1 19.8 8 40 30
20 PFCD4020F 1763.00 1 24 8 50 35
25 PFCD4025F 1937.00 1 30 6 60 45
27.5 PFCD4027F 2034.00 1 33 6 70 50
30 PFCD4030F 2132.00 1 36 6 75 50
33 PFCD4033F 2280.00 1 39.6 6 80 60
35 PFCD4035F 2384.00 2 42 4 90 60
40 PFCD4040F 2642.00 2 48 4 100 70
45 PFCD4045F 2871.00 2 54 4 110 75
50 PFCD4050F 3099.00 2 60 3 125 90
60 PFCD4060F 4397.00 2 72 2 150 100
65 PFCD4065F 4617.00 2 78 1 175 110
70 PFCD4070F 4985.00 3 84 1 175 125
75 PFCD4075F 5279.00 3 90 1/0 200 125
80 PFCD4080F 5540.00 3 96 1/0 200 150
90 PFCD4090F 6062.00 3 108 2/0 225 150
100 PFCD4100F 6582.00 3 120 2/0 250 175
125 PFCD4125F 7992.00 4 150 250 300 225
150 PFCD4150F 9401.00 5 180 300 400 250
175 PFCD4175F 10406.00 5 210 400 450 300
200 PFCD4200F 11409.00 5 240 500 500 350

Table 4.44: Super Duty fused 480V 3 phase/60 Hz unit

Recommended Recommended circuit protection
Kvar rating Super duty Indoor NEMA 1 unit Rated Current copper wire sized device ratinga
at 480V Catalog number $ Price Enclosurebc at 480V AWG Fuse Circuit breaker
6 PFCDS4006F 1814.00 1 7.7 14 15 15
8 PFCDS4008F 1959.00 1 10.4 12 20 15
9.5 PFCDS4010F 2047.00 1 11.5 12 25 20
13 PFCDS4013F 2253.00 1 15.4 10 30 25
16 PFCDS4016F 2424.00 1 19.2 8 40 30
17.5 PFCDS4017F 2538.00 1 20.8 8 45 30
20 PFCDS4020F 2651.00 1 23.1 8 50 35
22.5 PFCDS4022F 2783.00 2 26.9 8 60 40
25 PFCDS4025F 2914.00 2 30.8 6 60 45
27.5 PFCDS4027F 3207.00 2 33.5 6 70 50
30 PFCDS4030F 3430.00 2 36.2 6 75 60
35 PFCDS4035F 3586.00 2 42.3 4 90 70
40 PFCDS4040F 3974.00 2 49.3 4 100 80
45 PFCDS4045F 4319.00 3 53.9 4 110 80
50 PFCDS4050F 4662.00 3 61.6 3 125 90
60 PFCDS4060F 6613.00 4 73.1 2 150 110
70 PFCDS4070F 7498.00 4 84.7 1 175 125
75 PFCDS4075F 7940.00 4 90.1 1/0 200 150
80 PFCDS4080F 8333.00 5 97.8 1/0 200 150
90 PFCDS4090F 9118.00 5 107.8 2/0 225 175
100 PFCDS4100F 9896.00 5 120.9 3/0 250 200
115 PFCDS4115F 11220.00 5 138.6 4/0 300 225
a Consult local electrical codes for proper sizing of molded case circuit breaker frame or disconnect switch rating.
b Unit size 1, 2 and 3 can be wall mounted. Order PFCDBR2 mounting bracket separately.
c Refer to table 4-45 for dimensions
d Conductor should be copper and rated 90° C min. Refer to local electrical codes for proper wire size.

Table 4.45: Unit dimensions and weight

NEMA Type 1 Enclosure dimensions
Weight
Size H W D
No. IN mm IN mm IN mm Ib/Kg
1 31.3 795 20 508 16.88 429 78/35.5
2 43.8 1113 20 508 16.88 429 110/55
3 56.3 1430 20 508 16.88 429 146/66.4
POWER MONITORING AND

4 43.8 1113 36 914 16.88 429 220/100

5 56.3 1430 36 914 16.88 429 300/136.4
4 CONTROL

© 2009 Schneider Electric Discount 4-29

All Rights Reserved
DE2C Schedule
 PFC Capacitor Banks Class 5830
www.reactivar.com
FOR CURRENT INFORMATION
Low Voltage (LV) Standard Automatic
Capacitor Banks with Main Lugs or Main
Breakers Main Features:

The AV4000 and AV5000 standard automatic power • Modular construction; free standing QED switchboard
factor correction banks are designed for centralized power enclosures contain up to 500 kVAR per section and allow for
factor correction to supply varying amounts of reactive easy future expansion
power required to compensate for changing load • Standard offering available up to 400 Kvar at 208/240 Vac,
conditions. The AV4000 and AV5000 banks are ideally 1000 kVAR at 480 or 600 Vac
suited for facility electrical distribution systems with TDD • Main lugs or main breaker section at your choice
(total harmonic current distortion) < = 5% and THD(V) • Dry capacitor element design eliminates risk of fluid leakage,
(total harmonic voltage distortion) < = 3%. An advanced environmental hazard and drip pans
microprocessor-based recative power controller measures • Capacitor rated contactors are designed specifically for the
plant power factor via a single remote CT. Plus, it switches switching of capacitive currents and feature a patented
capacitor modules in and out of service to maintain a user- capacitor precharge circuit that exceeds air-core reactor
selected target power factor. transient dampening
Application Assistance: • Three different microprocessor controller options provide a
The AV4000 and AV5000 are choice in functionality and control sophistication
suitable for use where The Schneider Electric Power Quality Correction Experts
harmonic generating loads provide engineering assistance for the application of • Backlit display on controller displays actual PF, alarms,
number of steps energized and much more
are less than 15% of the total capacitors in harmonic rich environments. Specialists at
connected load (AV5000 Schneider Electric can assess the likelihood of application • Rugged design — units are constructed with removable steel
problems and arrange for more detailed study if required. panels over heavy gauge steel frame
shown here).
Solutions can include computer modeling and system • Available in Type NEMA 1 indoor enclosures
simulation. Our application engineers can make all the • Indoor units are finished with ASA 49 grey textured paint
arrangements for system studies, custom engineering, finish
installation and commissioning, as required by the • For application up to 200 kVAR max., 480 V (main lugs, top
application. Contact Schneider Electric sale office for entry only), the AV4000 offers compact and cost effective
detail equipment quotation assistance. alternative.
For dimension reference, see page 4-33.

Equipment specification:
Voltage: 240, 480, 600 Vac standard, 208, 380, 415 Vac available
Kvar rating: up to 1000 Kvar (depending on voltage rating)
Ambient temperature: -5°C to 40°C
Average temperature limit: <40°C within 24 hours, <30°C over 1 year
Elevation: <=1800 meter
Humidity: 0-95% non-condensing
Overvoltage limit: 110% maximum
Dielectric withstand test level: 2.15 times rated voltage or 1000 V, whichever is higher for 10s
Overcurrent limit: 130% maximum
Incoming: Top (standard), bottom, side.
Main lug: Mechanical standard, compression optional
Main breaker: PowerPact® with Micrologic® trip unit. LI standard, LSI available
Enclosure rating: NEMA 1 standard
Color: ANSI 49 standard, ANSI 61, ANSI 70 optional

Table 4.46:
CT Selection Guide for Class 5830, 5860, 5870
4

Current Rating of Bus/Cable Window Size

Main Transformer and 5880
Rating Code 7" x 4" Size Code 11" x 4" Size Code
Amperes •••• c c c c
Main Breaker The current transformer is located on a phase A bus or
External Current cable at the main service entrance as illustrated in 300 0300 07 11
Transformer 400 0400 07 11
POWER MONITORING AND

Ratio XXXX/5
Diagram 1. The CT should be sized for the maximum load 500 0500 07 11
current. The CT should be installed upstream of the 600 0600 07 11
capicator bank and plant loads to measure the combined 750 0750 07 11
current. 800 0800 07 11
1000 1000 07 11
CONTROL

CT catalog number: TRAI••••SCc c where •••• is 1200 1200 07 11

current rate code of bus/cable and c c is window size 1500 1500 07 11
1600 1600 07 11
code. Codes are listed in table 4.46.
Sub 600 kVAR Sub Sub Sub 2000 2000 07 11
Feed Automatic Feed Feed Feed e.g. TRAI1000SC07 is a CT for 1000 A bus with 7"x4" 2500 2500 07 11
Capacitor window. 3000 3000 07 11
Bank 3500 3500 07 11
4000 4000 07 11
Single Line (Typical) 5000 5000 N/A 11
Diagram 1 6000 6000 N/A 11

4-30 DE2C Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 PFC Capacitor Banks
www.reactivar.com Class 5860
FOR CURRENT INFORMATION
Low Voltage Anti-Resonant and Filtering Automatic Capacitor Banks with Main Lugs
and Breaker
ReactiVar® AV6000 anti-resonant and AV7000 harmonic filtering automatic switched capacitor banks are specifically
designed for networks containing harmonic energies which would otherwise damage standard fixed or automatic
capacitor banks.
The problem: Harmonics are a natural by-product of non-linear loads such as variable frequency drives, motor soft
starters, welders, uninterruptable power supplies, robotics, PLCs and other electronic devices. Harmonics introduce
higher-than-60 Hz current and voltage components into the electrical distribution system. Capacitors are a low
impedance path for these higher frequency components and thus will absorb these harmonic energies. Combinations
of capacitors and system inductances (motors and transformers) can form series and parallel tuned circuits which can
resonate at certain frequencies. The harmonics produced by non-linear loads can excite a standard capacitor bank into
resonance. The resonance can magnify currents and voltages, causing system wide damage and equipment failure.
This problem is growing in prevalence.
The solution: Anti-Resonant Automatic Switched Capacitor Banks
The AV6000 anti-resonance capacitor bank’s primary function is power factor correction. Iron core reactors are added
in series with the capacitor modules. The 3 phase reactors are custom designed and manufactured at our factory under
tight tolerance specifically for the AV6000. The reactors tune the bank below the first dominant harmonic (usually the
5th, or 300 Hz). Below the tuning point, the system appears capacitive and thus corrects power factor. Above the tuning
point, the system appears Inductive and thus resonance is minimized. The AV6000 design has the added advantage of
removing up to 50% of the 5th harmonic to reduce overall voltage distortion.
Harmonic Filtering Automatic Switched Capacitor Banks
The need for an AV7000 is usually determined by a power quality specialist. Although the AV7000 looks identical to the
AV6000, its primary function is harmonic mitigation, with power factor correction being a secondary benefit. The
distinction between an AV6000 and an AV7000 is the tuning point. By definition, if the tuning point of the
capacitor/reactor combination is within ±10% of the target harmonic it is intended to absorb, it is referred to as a filter. If
the tuning point is outside the ±10% limit, it is referred to as an anti-resonant system. As the tuning point of the system
approaches the target harmonic, its effectiveness at absorbing increases. Hence, the need to classify its functionality.
The PQc group should always be consulted prior to recommending it to customers.
Main Features
• Standard offering available up to 1200 kvar at 480 or 600 Vac
• Capacitor modules are designed with higher than standard voltage and current ratings to provide long life on systems with high
harmonic energies. Reactors are designed to operate at 115°C rise over a maximum 40°C ambient temperature.
• In addition to the standard features provided in the AV5000 systems, the reactors in the AV6000 have an embedded thermistor
temperature detector. The stage will shut down and annunciate if the reactor should overheat, usually a result of excessive
harmonic energies

Application Assistance
The Schneider Electric Power Quality Correction Experts provide engineering assistance for the application of
capacitors in harmonic rich environments. Specialists at Schneider Electric can assess the likelihood of application
problems and arrange for more detailed study if required. Solutions can include computer modeling and system
simulation. Depending on the network, the solution may include de-tuned banks (AV6000) or fully filtered banks
(AV7000). Our application engineers can make all the arrangements for system studies, custom engineering,
installation and commissioning, as required by the application. Contact Schneider Electric sales office for detail
equipment quotation assistance.
For dimension reference, see page 4-33.
Equipment specification:

Voltage: 480, 600 Vac standard, 380, 415 Vac available

Kvar rating: up to 1200 Kvar (depending on voltage rating)
Ambient temperature: -5°C to 40°C
Average temperature limit: <40°C within 24 hours, <30°C over 1 year
Elevation: <=1800 meter
Humidity: 0-95% non-condensing
Overvoltage limit: 110% maximum
Dielectric withstand test level: 2.15 times rated voltage or 1000 V, whichever is higher for 10s
Overcurrent limit: 130% maximum
POWER MONITORING AND

Incoming: Top (standard), bottom, side.

Main lug: Mechanical standard, compression optional
CONTROL

Main breaker: PowerPact® with Micrologic® trip unit. LI standard, LSI available
Enclosure rating: NEMA 1 standard
Color: ANSI 49 standard, ANSI 61, ANSI 70 optional
4

© 2009 Schneider Electric Discount 4-31

All Rights Reserved
DE2C Schedule
 PFC Capacitor Banks
Class 5870 www.reactivar.com
FOR CURRENT INFORMATION
Low Voltage Transient Free Reactive Compensation
Capacitor Banks
Square D® ReactiVar® Transient Free Reactive Compensation (TFRC) anti-resonant
(A/BT6000) Systems and filtering system (A/BT7000) are ideally suited for use on electrical
systems where connected equipment is extremely sensitive to variations in the supply
voltage.
The problem: Capacitor systems featuring electromechanical contactors generate Voltage
transients on the electrical network when switching capacitor stages on/off, even when
current limiting or tuning reactors are employed. Transients can impair the operation of
sensitive equipment, including programmable logic controllers, variable speed drives,
computers and UPS systems. In sensitive networks such as hospitals, data processing
centers, airports and many manufacturing environments, any transient, however slight, may
not be acceptable.
The solution: TFRC systems feature an advanced controller to precisely activate
electronic switching elements to connect capacitor stages and avoid the creation of
transients. Transient free switching also reduces wear on capacitors due to switching and
will result in longer life for the overall capacitor system. With a response time of less than
ten seconds to load changes, TFRC systems reduce the kVA demand on the transformer
and will eliminate utility imposed penalties for low power factor. Depending on the level of
harmonic producing (non-linear) devices on the network, two TFRC systems are available:
the AT6000 anti-resonant (de-tuned) system and the AT7000 filtered system. Non-linear
loads include variable speed drives, UPS systems, soft starters and other power electronic
devices. The anti-resonant system will absorb up to 50% of the fifth harmonic current while
the filtered system will absorb up to 80% of the fifth harmonic current, improving overall
network conditions.
Main Features:
• Standard offering up to 1350 Kvar at 480 or 600 Vac
• Transient free switching of capacitor steps
• Electronic switching elements yield an unlimited number of switching operations
• Three different microprocessor controller options provide a choice in functionality and control
sophistication
• Backlit display on controller displays actual PF, alarms, number of steps energized and much more
• Heavy duty dry capacitor element design provides no risk of fluid leakage, no environmental
pollution and no need for drip pans
• The Reactors have an embedded thermistor temperature detector. The stage will shut down and
annunciate if the reactor should overheat, usually a result of excessive harmonic energies
• Units are constructed with removable heavy duty steel panels over a 12 gauge steel frame.
• Indoor Type 1 units finished with ASA 49 gray polyester paint. Other colors available.

Application Assistance
The Schneider Electric Power Quality Correction Group provides engineering assistance for
the application of capacitors in harmonic rich environments. Specialists at Square D can
assess the likelihood of application problems and arrange for more detailed study if
required. Solutions can include computer modeling and system simulation. Our application
engineers can make all the arrangements for system studies, custom engineering,
installation and commissioning, as required by the application. Contact Schneider Electric
sales office for detail equipment quotation assistance.

To facilitate application assistance, please have the following information available:

• 12 months of utility billing information
• A single line diagram of the network showing the nature of loads
(e.g. 150 hp FVNR starters; 200 hp VFD; etc.)
• Transformer(s) kVA rating and percent impedance (%Z)
• Primary & secondary voltages
• Location of utility metering
• Size, type and location of any existing capacitors

For dimension reference, see page 4-33.

Equipment specification:
4

Voltage: 480, 600 Vac standard, 380, 415 Vac available

Kvar rating: up to 1350 Kvar (depending on voltage rating)
Load change response time: <10 seconds
Ambient temperature: -5°C to 40°C
POWER MONITORING AND

Average temperature limit: <40°C within 24 hours, <30°C over 1 year

Elevation: <=1800 meter
Humidity: 0-95% non-condensing
CONTROL

Overvoltage limit: 110% maximum

Dielectric withstand test level: 2.15 times rated voltage or 1000 V, whichever is higher for 10s
Overcurrent limit: 130% maximum
Incoming: Top (standard), bottom, side.
Main lug: Mechanical standard, compression optional
Main breaker: PowerPact® with Micrologic® trip unit. LI standard, LSI available
Enclosure rating: NEMA 1 standard, N3R available
Color: ANSI 49 standard, ANSI 61, ANSI 70 optional

4-32 DE2C Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 PFC Capacitor Banks
www.reactivar.com Class 5830, 5860, 5870, 5880
FOR CURRENT INFORMATION

Enclosure Dimension References

24 MIN. CLEARANCE 23.50 8.05

TOP VIEW

44.28

REMOVABLE
LIFTING
LUGS 36 MIN. CLEARANCE

AIR
FLOW
62.42

23.50 21.43

Figure 1—AV4000 Figure 2—AV5000 and 6000

32.00 8.02 24 MIN. CLEARANCE 32.00 32.00

24 MIN. CLEARANCE

TOP VIEW

60.00 60.00

SUPPLIED BUT
FIELD FITTED SUPPLIED BUT
CABLE ENTRY 36. MIN. CLEARANCE 36. MIN. CLEARANCE
FIELD FITTED
BOX C/W CABLE ENTRY
REMOVABLE BOX C/W
CABLE ENTRY REMOVABLE
PLATE QTY (1) CABLE ENTRY
PLATE QTY (1)
18.00 REMOVABLE 18.00 REMOVABLE
LIFTING LUGS LIFTING LUGS
AIR FLOW

POWER MONITORING AND

AIR
FLOW
93.50
91.50 91.50
CONTROL

66.26

32.00 35.00 32.00 32.00 35.00

Figure 3—AT6000 Figure 4—AT6000 (2 Section)

4

© 2009 Schneider Electric Discount 4-33

All Rights Reserved
DE2C Schedule
 ReactiVar Medium Voltage Capacitor Systems
Class 5840, 5841 www.reactivar.com
FOR CURRENT INFORMATION

Power factor correction, harmonic mitigation, and voltage support in

medium voltage electrical systems. Custom engineered for steady and
rapidly fluctuating loads.

ReactiVar® Medium Voltage Fixed Power Factor Capacitors

The ReactiVar MVC fixed capacitors are ideally suited for power factor correction in
applications where the load does not change or where the capacitor is switched with the
load, such as the load side of a motor contactor. ReactiVar capacitors are available up to
300 kVAR as individual units, and up to 600 kVAR in banks. Unfused or fused (2 fuses)
assemblies are available. Other ranges available upon request.

Features:
• Fused and unfused applications
• Standard rating up to 600 kVAR, 4800 V (for specials, consult factory)
• Metallized polypropylene film capacitors for low dielectric loss
• Internally mounted discharge resistors
• Operating temperature range of –25°C to +45°C
• Built to applicable NEMA, IEEE, and IEC standards
• Available in indoor (Type 1/12) and outdoor (Type 3R) enclosures
• Painted ASA 61 gray

MVC systems are suitable for Lead time: 12–14 weeks typical (consult factory for committed delivery)
power factor correction of steady
harmonic-free motor loads. Prices & assistance: Call PQc Group at (905) 678-6699 or email
[email protected]

ReactiVar Medium Voltage Metal Enclosed Automatic Capacitor Banks

(MV5000/MV6000/MV7000)
The ReactiVar medium voltage automatic capacitor banks are ideally suited for centralized
power factor correction and/or harmonic filtering in applications where plant loading is
constantly changing, resulting in the need for varying amounts of reactive power. All MV
capacitor systems are a custom-engineered to meet project specific application and
installation needs.

Features:
• Standard metal enclosures available up to 20,000 kVAR, 5/15 kV, 50/60 Hz
• The Square D HVL load interrupter switch (fused or unfused)
• Externally fused Merlin Gerin PROPIVAR (or equivalent) or Cooper capacitors with excellent life due
to high temperature withstand, small temperature rise, chemical stability, overvoltage and
overcurrent withstand. (Internally fused capacitor available upon request)
• Three-bushing capacitor cells connected in delta available up to 5 kV. Two-bushing capacitor cells
connected in ungrounded wye for higher voltages
• Current limiting capacitor fuses with blown fuse pop-up indicators
• current limiting reactors in multistage-step MV5000 standard systems to limit high capacitor inrush
MV5000 systems are suitable for use where currents
harmonic generating loads are less than 15% of • Iron core reactors in MV6000 de-tune banks to prevent parallel resonance
the total connected load. • Heavy-duty iron core reactors in MV7000 filtered banks for effective 5th harmonic filtering.
MV6000 systems are suitable for use where • Available in Type 1 indoor and 3R outdoor enclosure types
harmonic generating loads are less than 50% of • Key interlocking system forces sequential operation of the controls, non-load break switch (or circuit
the total connected load. breaker) and ground switches
MV7000 systems are suitable for use where • Superior Square D Varlogic™ microprocessor based power factor controller
harmonic generating loads exceed 50% of the • The Merlin Gerin SEPAM protective relaying.
total connected load.
Lead time: 16–20 weeks typical (consult factory for committed delivery)
MVHVC High-Speed compensation systems are
designed for compensation of rapidly Prices & assistance: Call PQc Group at (905) 678-6699 or email
fluctuating loads [email protected]
4
POWER MONITORING AND
CONTROL

4-34 DE2C Discount © 2009 Schneider Electric

Schedule All Rights Reserved
 AccuSine® PCS AHF
www.reactivar.com Class 5820
FOR CURRENT INFORMATION

The problem:
High levels of harmonics generated by non-linear loads can have significant negative
impact in the facility electrical system. It can cause malfunction of the equipment, disrupt
plant operation, thus, resulting in loss of productivity.
Harmonic filtering:
The AccuSine Power Correction System (PCS) is an Active Harmonic Filter (AHF) that
actively injects opposite harmonics current on the source side of the load and it:
• Decreases harmonic related overheating of cables, switchgear and transformers
• Reduces downtime caused by nuisance thermal tripping of protective devices
• Increases electrical network reliability and reduces operating costs
• Corrects to the 50th harmonic, reduce harmonics level to meet IEEE 519, IEC 61000 3-4, and
UK G5/4-1 standards.
• Compensates entire network or specific loads depending on installation point

Power Factor Correction and Dynamic VAR Compensation:

AccuSine PCS features a 100 microsecond response providing for dynamic VAR injection
to reduce voltage sags created by inductive load switching. AccuSine PCS can also operate
in a dual mode where current is first injected to reduce hamonics and any excess current
capacity is used to improve the power factor.
Other Features:
• Independent phase compensation
• UL, CE, ABS, and CSA approved
• Parallel connection allows for easy retrofit and installation of multiple units for large networks
• Response to load fluctuations begins in 100 microseconds with 1/2 cycle for full response to step
load changes
• 50, 100 and 300 A models for 208–480 V. Other voltages available.

Accusine PCS Sizing

For proper sizing of AccuSine units, contact the Schneider Electric sales office or e-mail
[email protected]. To expedite the product selection process, please have a single line
diagram and/or details of the application including sizes of transformers, non-linear and
linear loads, and any existing filters and capacitors.
Table 4.47: AccuSine PCS 208–480 Va, 50/60 Hz
Max Reactive Enclosure Exterior Dimensions
Rated Power (kVAR) Frequency Catalog List Price Weight
H W D
Current (Hz) Number (US$) Rating Style Cable Entry lbs (kg)
208 V 400V 480 V In mm In mm In mm
18 PCS050D5N1 34904.00 NEMA 1 Wall Mount Bottom 48 1219 20.7 526 18.5 470 250 (114)
PCS050D5N12 53738.00 NEMA 12
PCS050D5IP30 54299.00 IP30 661 (300)
50 34.6 41.6 50/60
N/A PCS050D5IP54 57553.00 IP54 Floor Standingc Top or Bottom 75 1905 31.5 801 23.8 605
PCS050D5CE30b 59516.00 IP30 (CE Certified)
682 (310)
PCS050D5CE54b 62770.00 IP54 (CE Certified)
36 PCS100D5N1 55131.00 NEMA 1 Wall Mount Bottom 64.9 1648 20.7 526 18.5 470 350 (1159)
PCS100D5N12 66777.00 NEMA 12
PCS100D5IP30 71897.00 IP30 771 (350)
100 69.2 83.1 50/60
N/A PCS100D5IP54 78948.00 IP54 Floor Standingc Top or Bottom 75 1905 31.5 801 23.8 605
PCS100D5CE30b 74449.00 IP30 (CE Certified)
795 (361)
PCS100D5CE54b 78679.00 IP54 (CE Certified)
108 PCS300D5N1 110301.00 NEMA 1 Top 31.5 801 19.6 497 775 (352)
PCS300D5N12 132341.00 NEMA 12
PCS300D5IP30 133670.00 IP30 985 (448)
300 207.8 249.4 50/60 Floor Standingc 75 1905
N/A PCS300D5IP54 142628.00 IP54 Top or Bottom 39.4 1000 31.7 806
PCS300D5CE30b 144502.00 IP30 (CE Certified)
1033 (470)
PCS300D5CE54b 161035.00 IP54 (CE Certified)
a Other voltages available. Contact your nearest Schneider Electric sales office.
b CE Certified models meet EMC Directive 89/336 EEC.
c Floor Standing models include a door-interlocked disconnect.

NOTE: Refer to Table 4.48 on page 4-36 for CT details.

POWER MONITORING AND
4 CONTROL

© 2009 Schneider Electric Discount 4-35

All Rights Reserved
DE2C Schedule
 AccuSine® PCS AHF Hybrid VAR Compensator (HVC)
Class 5890 www.reactivar.com
FOR CURRENT INFORMATION
The Hybrid VAR Compensator (HVC) is ideally suited for industrial facilities with power
quality or production problems caused by rapidly changing load demands typical of highly
cyclical loads such as welders, mining conveyors and heavy stamping machines.
Main
Breaker
(Optional)
The problem:
Traditional capacitor systems have a minimum response time of five to ten seconds for load
fluctuations. As a result of this limitation, uncompensated faster loads can produce voltage
instability, voltage flicker, increased losses and poor power factor which reduces the electric
supply capacity. Problems can often be seen inside the facility, on the utility feeder to the
facility or in neighboring facilities. Problems can include:
• Poor weld quality or reduced weld line productivity (due to restrikes or interlock
weld controls)
• Failure to start motor loads (due to voltage sag on startup)
• Undervoltage tripping of sensitive loads (Robots, PLCs, VFDs)
• Lighting flicker and/or HID lighting shutdown
• Overloaded distribution equipment (cyclical current pulses may exceed the rated
current of the distribution equipment)
AccuSine
EVC • Poor power factor and associated utility demand charges
• High harmonic levels

Ultra-Fast Reactive Power Solution:

100 kVAR 100 kVAR 100 kVAR 300 Ampere
• The Hybrid VAR Compensator is ideally suited for power factor correction and voltage sag support
PASSIVE ACTIVE in many applications where conventional systems are not suitable:
HVC Topology (Typical) • One cycle or less for full response
• Infinite VAR resolution
• Compensates for large inductive inrush currents
• Transient free compensation
• Improves voltage regulation
• Reduces flicker
HVC systems can alleviate any of the problems created by cyclical loads that require large
amounts or reactive power for short duration.

Unique, cost-effective construction:

HVC systems couple a detuned capacitor system (fixed, contactor or power electronic
switched) with the AccuSine® Electronic VAR Control (EVC) unit. The Accusine EVC is able
to inject leading or lagging VARs to provide variable compensation over the operating
rating. For example, coupling a 500 kVAR fixed detuned bank with a 300 A Accusine EVC
yields an HVC that can provide reactive compensation between 250 kVAR and 750 kVAR.

Custom Designed Solution:

Sizing of the HVC will often require a site visit by Schneider Electric Power Quality
Correction Group technicians to take real-time measurements of the network. Please
contact the PQc group at (905)678-6699 or email [email protected]

Round Split-Core Selection:

1.25 Three CT’s required for networks with line-neutral loads. Two remote current transformers
32
required for three phase loads. For installations requiring parallel connection of multiple
AccuSine for increased correction capacity, special considerations may be required.
Contact the Schneider Electric Power Quality Correction Group for details.
D
Table 4.48:
Dimensions (IN) Weight Burden Secondary
Ampacity Catalog No. $ Price Accuracy
A (ID) D (OD) (lbs.) Capacity Current
4

1.50 A 1000 CT1000SC 642.00 4.0 6.5 3.5 1% 10 VA 5A

38
3000 CT3000SC 800.00 6.0 8.5 4.25 1% 45 VA 5A
5000 CTFCL500058 1082.00 8.0 10.5 5.5 1% 45 VA 5A
Note: Rectangular CTs also available; contact PQC group.
POWER MONITORING AND
CONTROL

4-36 DE2C Discount © 2009 Schneider Electric

Schedule All Rights Reserved