Scribd
Upload
41 views

Lecture41 PDF

Cyclones use centrifugal force to separate solid particles from gas streams. Gas and particles enter the cyclone tangentially and swirl downward. Centrifugal force pushes particles outward against the wall where they settle to the bottom, while gas moves inward and exits through the top. The theoretical cut diameter of a cyclone is the particle size where centrifugal and drag forces balance, allowing 100% collection of larger particles. Cyclones are effective for particle sizes around 5 microns but require high gas velocities and pressure drops. Their separation efficiency can be determined from design graphs.

Uploaded by

Tristan Sim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views

Lecture41 PDF

Cyclones use centrifugal force to separate solid particles from gas streams. Gas and particles enter the cyclone tangentially and swirl downward. Centrifugal force pushes particles outward against the wall where they settle to the bottom, while gas moves inward and exits through the top. The theoretical cut diameter of a cyclone is the particle size where centrifugal and drag forces balance, allowing 100% collection of larger particles. Cyclones are effective for particle sizes around 5 microns but require high gas velocities and pressure drops. Their separation efficiency can be determined from design graphs.

Uploaded by

Tristan Sim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Objectives_template

Module 13: Cyclone


Lecture 41: Equipment, theoretical cut diameter, efficieny

Cyclone (Centrifugal settler)

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture41/41_1.htm[5/9/2012 3:45:12 PM]


Objectives_template

Module 13: Cyclone


Lecture 41: Equipment, theoretical cut diameter, efficieny

Cyclone (Centrifugal settler)


The equipment separates solid particles from a gas (eg. dust laden flue gas), based on the
principle of centrifugal force, which is much stronger than gravitational force. Cyclone works
relatively more efficiently at high gas flow rates.
The equipment requires large flow rates/velocity to create a swirling movement inside the
column. Cyclone, as such, does not have moving parts but may require a blower upstream to
impart KE to the gas laden with particles.

(Fig. 41a) (Fig. 41b)

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture41/41_2.htm[5/9/2012 3:45:12 PM]


Objectives_template

Module 13: Cyclone


Lecture 41: Equipment, theoretical cut diameter, efficieny

a. The real trajectory of gas and particles is difficult to analyze. The particles laden gas enters
the cyclone from the sideway (see top view) at a high flow rate and moves downward in a
swirling/ spiral path.
b. Solid particles are thrown outward radially due to centrifugal force. They strike the walls of
cyclone and settle down. Gas, on the other hand, will move radially inward, then upward
through the least hydrodynamically resistance – path to the exit.
c. Gas moving in spiral reaches the apex of the cone, then moves upward in a smaller spiral
( ) path to the exit at the top, as the opening at the bottom is filled with solid
particles. For the gas, the least resistance – path is the exit at the top. For the particles, the
least resistance- path is the exit at the bottom.
d. Mechanistically, if the centrifugal force acting on the particles is larger than the drag (inward)
by the gas, the particles will strike the walls and settle down, else they will move inward
alongwith the gas. At a radius r, where these two forces are equal, particle will rotate in
equilibrium and move downward till they hit the slant walls and are collected. Gas on the other
hand has a very high upward flow rate at the center, typically in the core-diameter of .
Any particle in the zone will be carried upward.

(Fig. 41c)

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture41/41_3.htm[5/9/2012 3:45:12 PM]


Objectives_template

Module 13: Cyclone


Lecture 41: Equipment, theoretical cut diameter, efficieny

Theoretical ‘cut-size' of a cyclone is the particle size above which all particles will be
collected. A theoretical expression considering drag and centrifugal forces on a particle, has
been obtained to estimate the ‘cut size' of cyclone. The calculation takes into account the
experimental observation that the equilibrium rotation-radius of all captured particles in
cyclone is do, where do is the diameter of the nozzle at the top of the

cyclone though which the gas exits.


The settling velocity of captured particles,

where,

Form , the theoretical cut–diameter, d p is determined from the settling velocity equation:

(Note that it is assumed that particles settle in Stoke's regime)

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture41/41_4.htm[5/9/2012 3:45:13 PM]


Objectives_template

Module 13: Cyclone


Lecture 41: Equipment, theoretical cut diameter, efficieny

All particles having diameter will have equilibrium radius within 0.5 do so that they will
be carried away with the gas.
All particles having diameter will be captured in cyclone.
Cyclones are very effective in removing particles from gas. Disadvantages are large flow rate
required and large pressure–drop because of the tortuous path of the gas.

gas velocity at the inlet

Separation factor of a cyclone, s is defined as

Cyclones are effective typically for particle size


Efficiency (capturing) of cyclone,

Design graphs are available to calculate the efficiency.

(Fig. 41d)

End

file:///D|/Web%20Course/Dr.%20Nishith%20Verma/local%20server/fluid_mechanics/lecture41/41_5.htm[5/9/2012 3:45:13 PM]

You might also like