Sizing & Selection 21

Dimensions and Weights

This section provides typical dimensions for Valtek's designs may be improved over time, thus causing
basic line of control valves. This dimensional informa- changes in dimensions. For certified dimensional draw-
tion is for estimating only and is not certified since ings, contact factory. All dimensions are in inches / mm.

(Lifting ring available on N

sizes 25 and 50 only)
J
L K
M M

G
G G

MATCH MATCH MATCH MATCH

LINE LINE LINE LINE

E0083

With Top-mounted With Push-only

Standard Cylinder Actuator
Continuously Connected Handwheel Handwheel

Body Size G* J K** L** M*** N

Cylinder (inches) Spud Top-mounted
Size Diameter Handwheel
(sq.in.) Class Class (inches) Std. Cont. Push
125 - 600 900 - 2500 Conn. Only
1 1
25 /2 to 2 /2 to 1 2.00 14.7 373 – – 17.4 442 6.5 165 7.4 189 4.9 124 9.0 229 – –
1 1
/2 to 2 /2 to 1 2.00 18.8 478 – – 27.0 686 9.1 232 8.7 221 4.6 118 12.0 305 – –
1
50 3 to 4, 1 /2 to 2 2.62 21.1 535 – – 29.3 743 9.1 232 6.6 168 4.6 118 12.0 305 – –
6 (Class 150)
3 to 4, 11/2 to 2 2.62 - 2.88 26.0 660 45.0 1143 40.1 1019 12.5 318 9.9 252 4.5 114 18.0 457 16.0 406
6 (Class 150)
6 to 8,
100 10 to 12 3 to 4 3.38 27.0 686 46.0 1168 41.1 1044 12.5 318 10.4 264 4.2 105 18.0 457 16.0 406
(Class 150)
10 to 14 6 and larger 4.00 - 4.75 27.0 686 46.0 1168 46.1 1044 12.5 318 10.8 273 4.2 105 18.0 457 16.0 406
1
3 to 4, /2 to 2 2.62 - 2.88 26.6 676 45.6 1159 40.7 1034 17.5 445 9.9 252 4.5 114 18.0 457 16.0 406
6 (Class 150)
200 6 to 8,
10 to 12 3 to 4 3.38 27.6 702 46.6 1184 41.7 1059 17.5 445 10.4 264 4.2 105 18.0 457 16.0 406
(Class 150)
10 to 14 6 and larger 4.00 - 4.75 27.6 702 46.6 1184 41.7 1059 17.5 445 10.8 273 4.2 105 18.0 457 16.0 406
300 6 and larger 6 and larger 3.38 - 4.75 30.5 774 54.1 1373 **** **** 21.8 552 11.1 283 4.1 105 18.0 457 16.0 406
400 6 and larger 6 and larger 3.38 - 4.75 36.6 930 56.7 1439 **** **** 18.0 457 10.7 272 4.5 114 18.0 457 16.0 406
500 6 and larger 6 and larger 3.38- 4.75 31.0 787 *** *** **** **** 28.0 711 11.1 283 4.1 105 18.0 457 16.0 406
600 6 and larger 6 and larger 3.38 - 4.75 45.8 1163 *** *** **** **** 21.8 552 11.1 283 4.1 105 18.0 457 16.0 406

* 100 sq. in. and larger, 4-inch maximum stroke. Consult factory. *** Standard size shown. Handwheel diameter subject to
** For Beta I/P positioner add 2.0 inches (52 mm) to "L" dimension, change per torque requirements.
and 1.8 inches (45 mm) to "K" dimension. **** Consult factory.

Rev. 10/94 21-1

Linear Actuator Dimensions

M (Lifting ring available on N

size 25 and 50 only)

G
OPEN NEU

E0084 MATCH
LINE
K

Side-mounted Continuously Connected Handwheel*

With Size 25, 50, 100 and 200 (inches / mm)
Body Size (inches)
Cylinder Spud Operator
Size Class Class Diameter Size G* K** M N R
150-600 900-2500 (inches)
1 1
25 /2 to 2 /2 to 1 2.00 25 17.9 454 7.3 186 9.0 229 9.4 238 7.3 185
1 1
/2 to 2 /2 to 1 2.00 25 21.9 555 7.8 199 9.0 229 9.4 238 7.3 185
50 3 to 4, 1
1 /2 to 2 2.62 50 25.6 650 7.3 184 12.0 305 12.7 322 10.3 262
6 (Class 150)
3 to 4, 11/2 to 2 2.62 50 28.9 735 8.6 218 12.0 305 12.7 322 10.3 262
6 (Class 150)
4, 2.88 100/200 34.6 879 9.9 252 24.0 610 19.5 495 14.6 371
6 (Class 150)
6 to 8,
10 to 12 3 and 4 3.38 100/200 35.1 892 10.3 260 24.0 610 19.5 495 15.2 386
100
(Class 150)
10 to 14 6 and larger 4.00-4.75 100/200 35.1 892 10.7 272 24.0 610 19.5 495 15.2 386
4, 2.88 100/200 36.2 919 9.9 252 24.0 610 19.5 495 15.2 386
6 (Class 150)
6 to 8,
200 10 to 12 3 and 4 3.38 100/200 36.2 919 10.3 260 24.0 610 19.5 495 15.2 386
(Class 150)
10 to 14 6 and larger 4.00-4.75 100/200 36.2 919 10.7 272 24.0 610 19.5 495 15.2 386

* 100 sq. in. and larger 4-inch maximum stroke, use top-mounted continuously connected handwheel
** For Beta I/P Positioner add 1.8 inches (45 mm) to dimension

21-2
Manual Handwheel and Trooper Dimensions

Manual Handwheel (inches / mm)

O
G Handwheel Body Size (inches) Spud Size
G M
S
Type Class 150 thru 600 (inches)
1
HA /2 thru 2 2.00 8.8 223 9.0 229
MATCH HB 3, 4, 2.62/2.88 13.1 334 12.0 305
LINE 6 (Class 150 ) 13.3 339 18.0 457
HC 4, 2.88 17.4 442 18.0 457
6 (Class 150 ) 18.0 457 24.0 610
E0104

HD 6 (Class 300, 600), 3.38 17.5 445 18.0 457

8, 10, 12 (Class 150) 18.1 461 24.0 610

J
E

F F**

A E0085 E0101

Trooper (inches / mm)

Body A* E F** J
Size Class Actuator Size Actuator Size
(in.) 150 300 48 38 38 I/P 49 39 39 I/P 48/38 49/39
1 7.3 185 7.8 198 3.8 97 17.0 432 18.6 472 19.6 498 – – – – – – 8.1 206 – –
11/2 8.8 224 9.3 236 3.8 97 17.8 452 19.4 493 20.4 518 19.8 503 21.4 544 22.4 569 8.1 206 11.8 300
2 10.0 254 10.5 267 3.8 97 17.8 452 19.4 493 20.4 518 19.8 503 21.4 544 22.4 569 8.1 206 11.8 300
3 11.8 300 12.5 318 5.1 130 – – – – – – 22.9 582 24.5 622 25.5 648 – – 11.8 300
4 13.9 353 14.5 368 5.1 130 – – – – – – 24.1 612 25.7 653 26.7 678 – – 11.8 300
* Per ANSI/ISA S75.03, 1985; ANSI/ISA S75.12, 1987. Socketweld and NPT end connections are available on 1 thru 2-inch valves
with equivalent face-to-face dimensions.
** With top-mounted handwheel add 3.6 in. (91mm) to actuators sizes 48, 38, 38I/P; add 4.9 in. (124 mm) to actuator sizes 49, 39, 39I/P.

21-3
Mark One Dimensions

MATCH
LINE

MATCH
H
LINE

A E0086 A

Class 150, 300, 600 (inches / mm)

A B H Disassembly
Body
ANSI/Globe* ANSI/ISA** Clearance
Size Above
(inches) Class Class Class Class Standard Extended Actuator
150, 300, 600 150 300 600 Bonnet Bonnet
1
/2 & 3/4 8.5 216 7.3 184 7.6 194 8.1† 206† 1.5 38 3.8 97 8.3 212 2.5 64
1 8.5 216 7.3 184 7.8 197 8.3 210 1.8 44 3.8 97 8.3 212 2.5 64
1 1/ 2 9.5 241 8.8 222 9.3 235 9.9 251 2.3 59 5.2 132 9.7 246 4.0 102
2 11.5 292 10.0 254 10.5 267 11.3 286 2.3 57 5.4 138 9.9 252 4.5 114
3 14.0 356 11.8 298 12.5 318 13.3 337 3.4 86 6.8 172 12.3 312 5.8 147
4 17.0 432 13.9 353 14.5 368 15.5 394 5.2 133 8.4 214 13.9 354 7.5 190
6 17.8 451 5.5 139 10.1 256 15.6 395 10.0 254
6 18.6 473 20.0 508 5.8 146 12.3 311 17.8 451 10.0 254
8 21.4 543 7.1 180 12.5 318 18.0 457 10.9 277
8 22.4 568 24.0 610 7.5 190 14.4 365 19.9 505 11.4 290
10 26.5 673 8.4 214 14.1 359 19.6 498 11.9 302
10 27.9 708 29.6 752 8.9 227 14.1 359 20.6 524 12.1 308
12 29.0 737 9.6 243 14.1 359 19.6 498 12.6 320
12 30.5 775 32.3 819 16.3 413 22.8 578 12.6 320
* Valtek standard per ANSI/ISA S75.20, 1992 ** Per ANSI/ISA S75.03, 1985 †For screwed end use 8.3 inch (210 mm)

Class 900, 1500, 2500 (inches / mm)

A B H Disassembly
Clearance
Body Face-to-Face* Standard Bonnet Extended Bonnet Above Actuator
Size
Class Class Class Class Class Class Class Class Class Class
(in.)
900, 1500 2500 1500 2500 900, 1500 2500 900, 1500 2500 900, 1500 2500
1 11.0 279 12.02 3052 1.8 44 1.8 44 5.6 143 6.8 173 10.1 257 11.3 286 3.6 90 3.6 90
1 1
1 /2 13.0 330 15.0 3811 2.7 68 2.4 60 8.7 220 8.7 221 13.2 334 13.2 334 5.6 141 5.6 141
2 14.8 375 15.8 400 2.8 71 3.0 77 8.7 220 8.7 221 13.2 334 13.2 334 6.1 154 6.1 154
1 1
3 18.1 460 26.0 660 4.2 106 3.7 94 11.4 289 12.9 328 18.4 467 19.9 506 8.4 214 8.3 211
4 20.9 530 29.01 7371 4.4 113 5.4 138 12.4 316 14.6 371 19.4 496 21.6 549 9.7 246 10.7 272
6 30.02 7622 34.01 8641 7.2 183 7.3 184 16.4 416 17.4 442 23.4 594 27.3 692 12.2 309 13.6 344
8 32.8 832 40.3 1022 9.4 240 10.3 262 18.6 473 24.3 616 24.2 613 31.3 794 16.7 424 17.8 451
10 39.0 991 50.0 1270 11.2 284 10.0 254 21.9 556 26.0 660 28.9 734 33.0 838 18.3 465 19.5 495
12 44.5 1130 56.0 1422 14.0 356 12.9 327 26.6 675 28.0 711 33.6 852 35.0 889 19.4 492 20.5 521
14 49.5 1257 24.8 629 31.8 806 20.5 521
* ANSI/ISA S75.15, 1987; (1) Per ANSI/ISA S75.16, 1987; (2) Valtek standard

21-4
Mark One Dimensions

MATCH
LINE

Cold Box Extended Bonnet (inches / mm)

Body Body H
Size Rating H
(inches) Class Standard Cold Box Extended
1
/2 to 1 150 thru 600 15.0 381 24.0 610 27.0 686
11/2 150 thru 600 15.0 381 24.0 610 27.0 686
2 150 thru 600 15.3 387 24.3 616 27.3 692
3 150 thru 600 18.0 457 24.0 610 27.0 686
4 150 thru 600 18.0 457 24.0 610 27.0 686
6 150 18.0 457 24.0 610 27.0 686
E0087

Angle Body (inches / mm)

A H Disassembly
Body Body Clearance
Size Rating Standard Extended Above
(inches) Class Bonnet Bonnet Actuator
1
/2 to 1 150 thru 600 4.3 108 3.1 78 7.6 192 2.5 64
1 1/ 2 150 thru 600 4.8 121 3.6 92 8.1 206 4.0 102
2 150 thru 600 5.8 146 3.9 100 8.4 214 4.5 114
3 150 thru 600 7.0 178 4.9 124 10.4 264 5.8 147
4 150 thru 600 8.8 222 6.2 156 11.7 295 7.5 190
6 150 8.9 226 7.1 180 12.6 320 10.0 254 MATCH
LINE

300 thru 600 11.0 279 9.5 241 15.0 381 10.0 254
H
8 150 13.0 330 9.0 229 14.5 368 13.8 349
300 thru 600 13.0 330 10.8 275 16.3 414 13.8 349

1
/2 to 1 900, 1500 5.5 140 4.7 119 9.2 234 3.6 90 A
2500 6.0 152 5.8 147 10.3 262 3.6 90
11/2 900, 1500 6.5 165 6.5 165 11.0 279 5.6 142
2500 7.5 191 7.0 178 11.5 292 5.6 142
A E0102
2 900, 1500 7.3 185 7.1 180 11.6 295 6.1 155
2500 8.9 226 7.9 201 12.4 315 6.1 155
3 900, 1500 9.3 236 9.8 249 16.8 427 8.4 213
2500 13.0 330 11.2 284 18.2 462 8.3 211
4 900, 1500 12.5 318 11.1 282 18.1 460 9.7 246
2500 14.5 368 12.6 320 19.6 498 10.7 272
6 900, 1500 13.9 353 13.3 338 20.3 516 12.2 310
2500 17.0 432 16.1 409 23.1 537 13.6 345
8 900, 1500 16.4 417 14.5 368 21.5 547 16.7 424
2500 20.1 511 20.8 528 27.8 706 17.8 452
10 900, 1500 19.5 495 15.6 396 22.6 574 18.3 465
2500 25.0 635 21.1 536 28.1 714 16.3 414

21-5
Mark One Dimensions

MATCH
LINE

E0088

A D

Three-way Body (inches / mm)

A B C D H
Disassembly
Body ANSI/ ANSI/ISA Clearance
Size Globe Above
(in.) Class Class Class Class Std. Ext. Actuator
150,300,600 150 300 600 Bonnet Bonnet
1
/ 2 & 3/ 4 8.5 216 7.3 184 7.6 194 8.1† 206† 1.5 38 3.4 87 4.3 108 6.7 170 11.2 284 3.4 86
1 8.5 216 7.3 184 7.8 197 8.3 210 1.8 44 3.4 87 4.3 108 6.7 170 11.2 284 3.4 86
1 1/ 2 9.5 241 8.8 222 9.3 235 9.9 251 2.3 59 5.4 137 4.8 121 9.1 230 13.4 341 5.0 127
2 11.5 292 10.0 254 10.5 267 11.3 286 2.3 59 5.6 143 5.8 146 9.3 236 13.7 347 5.5 140
3 14.0 356 11.8 298 12.5 318 13.3 337 3.4 86 7.6 194 7.0 178 13.0 329 18.5 470 7.1 181
4 17.0 432 13.9 353 14.5 368 15.5 394 5.2 133 9.9 251 8.5 216 16.7 423 22.1 562 9.4 240
6 17.8 451 5.5 139 14.0 356 8.9 226 21.6 548 26.6 675 11.6 294
6 18.6 473 20.0 508 5.8 146 16.0 406 10.0 254 25.8 654 31.3 794 11.6 294
8 21.4 543 7.0 179 15.0 381 10.7 272 23.9 608 29.4 748 12.2 310
8 22.4 568 24.0 610 7.5 191 18.3 464 12.0 305 30.2 767 35.7 907 12.2 310

* Per ANSI B16.10, 1986

** Per ANSI/ISA S75.03, 1985
†For screwed end use 8.3 inch (210 mm)

21-6
Guardian Dimensions

MATCH
LINE

E0089
A

Table V: Dimensions (inches / mm)

A
Bellows ANSI ANSI/ISA Disassembly
Clearance
Body Rating B H Above
(in.) (psi) Class 150, Class Class Class Actuator
300, 600 150 300 600
1
/ 2 - 3/ 4 160 8.5 216 7.3 184 7.6 194 8.1 206 1.5 38 5.8 146 4.0 102
1
/ 2 - 3/ 4 310 8.5 216 7.3 184 7.6 194 8.1 206 1.5 38 6.5 165 4.0 102
1 160 8.5 216 7.3 184 7.8 197 8.3 210 1.8 44 5.8 146 4.0 102
1 310 8.5 216 7.3 184 7.8 197 8.3 210 1.8 44 6.5 165 4.0 102
1
1 /2 160 9.5 241 8.8 222 9.3 235 9.9 251 2.3 58 8.0 203 5.3 133
1
1 /2 310 9.5 241 8.8 222 9.3 235 9.9 251 2.3 58 8.4 213 5.3 133
2 160 11.5 292 10.0 254 10.5 267 11.3 286 2.3 58 8.2 208 6.0 152
2 310 11.5 292 10.0 254 10.5 267 11.3 286 2.3 58 8.6 219 6.0 152
3 160 14.0 356 11.8 298 12.5 318 13.3 337 3.4 86 9.9 251 7.3 184
3 310 14.0 356 11.8 298 12.5 318 13.3 337 3.4 86 10.4 264 7.3 184
4 160 17.0 432 13.9 353 14.5 368 15.5 394 5.2 133 13.8 351 10.0 254
4 310 17.0 432 13.9 353 14.5 368 15.5 394 5.2 133 14.8 376 10.0 254

21-7
Guardian II Dimensions

MATCH
LINE

A E0090

Guardian II Dimensions (inches / mm)

A Disassembly
Valve
Body ANSI ANSI/ISA B H Clearance
Size Class 150, Class Class Class Above
(inches) 300, 600 150 300 600 Actuator
1
⁄2 , 3 ⁄4 , 8.5 216 7.3 184 7.6 194 8.1 206 1.5 38 12.1 307 3.3 83
1 8.5 216 7.3 184 7.8 197 8.3 210 1.8 44 12.1 307 3.3 83
1
1 ⁄2 9.5 241 8.8 222 9.3 235 9.9 251 2.3 59 16.5 420 5.0 127
2 11.5 292 10.0 254 10.5 267 11.3 286 2.3 57 16.5 420 5.5 140
3 14.0 356 11.8 298 12.5 318 13.3 337 3.4 86 19.0 483 7.0 178
4 17.0 432 13.9 353 14.5 368 15.5 394 5.2 133 27.2** 691** 9.3 235
6 17.8 451 5.5 139 29.1** 738** 11.5 292
6 18.6 473 20.0 508 5.8 146 29.1 738 11.5 292
8 21.4 543 7.1 180 35.3 896 12.0 305
8 22.4 568 24.0 610 7.5 190 35.3 896 12.8 324
** For 2.88 inch spud diameter subtract 0.6 inch (16 mm)

21-8
Mark One-X Dimensions

MATCH
LINE

A E0091

Mark One-X Dimensions (inches / mm)

A
Body
ANSI/Globe* ANSI/ISA** B E H
(inches)
Class 300, 600 Class 300 Class 600
4x2 17.0 432 14.5 368 15.5 394 2.5 63 5.4 137 5.4 137
6x3 N/A 18.6 473 20.0 508 5.1 130 6.9 175 6.8 172
6x4 N/A 18.6 473 20.0 508 5.1 130 10.5 267 8.4 214
8x4 N/A 22.4 568 24.0 610 6.4 164 12.8 324 8.4 214
8x6 N/A 22.4 568 24.0 610 7.9 200 12.8 324 12.3 311
10 x 4 N/A 27.9 708 29.6 752 5.9 151 14.0 356 8.4 214
10 x 6 N/A 27.9 708 29.6 752 7.4 187 14.0 356 12.3 311
12 x 6 N/A 30.5 775 32.3 819 7.2 182 14.5 368 12.3 311
12 x 8 N/A 30.5 775 32.3 819 7.2 182 14.5 368 14.4 365
* Per ANSI B16.5-1988
** Per ANSI/ISA S75.03-1985

21-9
 J
Mark Eight Dimensions E*

G
O

C
A

E0093
B E0092

Class 150 Dimensions (inches / mm)

Size Actuator A B C E F G H J
(in.) Size
1
/2 -1 25 8.0 203 3.0 76 18.9 480 3.9 100 15.9 404 14.3 363 5.0 127 6.5 165
11/2 25 10.0 254 3.8 95 20.4 518 3.9 100 16.7 424 14.3 363 6.0 152 6.5 165
2 25 13.0 330 4.5 114 21.9 556 3.9 100 17.4 442 14.3 363 7.0 178 6.5 165
3 50 16.0 406 4.8 121 28.4 721 4.8 122 23.7 602 20.1 511 8.8 224 9.1 232
4 50 20.4 518 7.0 178 32.6 828 4.8 122 25.6 650 20.1 511 11.5 292 9.1 232
6 50 25.5 648 9.0 229 37.3 947 4.8 122 28.3 719 20.1 511 5.4 137 9.1 232
8 100 34.0 864 13.0 330 50.6 1285 5.5 140 37.6 955 28.9 735 18.0 457 12.5 318
200 34.0 864 13.0 330 52.8 1341 6.6 168 39.8 1011 29.6 751 18.0 457 17.5 445
10 100 34.0 864 14.5 368 53.7 1364 5.5 140 39.2 996 28.9 735 20.3 514 12.5 318
200 34.0 864 14.5 368 55.9 1420 6.6 168 41.4 1052 29.6 751 20.3 514 17.5 445
12 100 45.0 1143 13.0 330 58.7 1491 5.5 140 42.7 1085 28.9 735 25.3 641 12.5 318
200 45.0 1143 13.0 330 60.9 1547 6.6 168 44.9 1140 29.6 751 25.3 641 17.5 445
14 100 52.0 1321 18.0 457 64.1 1628 5.5 140 46.1 1171 28.9 735 30.0 762 12.5 318
200 52.0 1321 18.0 457 66.3 1684 6.6 168 48.3 1227 29.6 751 30.0 762 17.5 445
16 100 60.0 1524 20.5 521 69.4 1763 5.5 140 48.9 1242 28.9 735 34.0 864 12.5 318
200 60.0 1524 20.5 521 71.6 1819 6.6 168 51.1 1298 29.6 751 34.0 864 17.5 445
18 100 68.0 1727 21.5 546 73.2 1859 5.5 140 51.7 1313 28.9 735 38.0 965 12.5 318
200 68.0 1727 21.5 546 75.5 1918 6.6 168 54.0 1372 29.6 751 38.0 965 17.5 445

Class 300/600 Dimensions (inches / mm)

Size Actuator A B C E F G H J
(in.) Size
1
/2 -1 25 8.0 203 3.0 76 18.9 480 3.9 100 15.9 404 14.3 363 5.0 127 6.5 165
11/2 25 10.0 254 3.8 95 20.4 518 3.9 100 16.7 424 14.3 363 6.0 152 6.5 165
2 25 13.0 330 4.5 114 21.9 556 3.9 100 17.4 442 14.3 363 7.0 178 6.5 165
3 50 16.0 406 4.8 121 28.4 721 4.8 122 23.7 602 20.1 511 8.8 224 9.1 232
4 50 20.4 518 7.0 178 32.6 828 4.8 122 25.6 650 20.1 511 11.5 292 9.1 232
6 50 26.5 673 9.0 229 44.0 1118 5.5 140 35.0 889 27.9 710 15.4 391 12.5 318
100 26.5 673 9.0 229 47.0 1194 6.6 168 38.0 965 29.6 751 15.4 391 17.5 445
8 100 34.0 864 13.0 330 50.6 1285 5.5 140 37.6 955 28.9 735 18.0 457 12.5 318
200 34.0 864 13.0 330 52.8 1341 6.6 168 39.8 1011 29.6 751 18.0 457 17.5 445
10 100 38.0 965 14.5 368 53.7 1364 5.5 140 39.2 996 28.9 735 20.3 514 12.5 318
200 38.0 965 14.5 368 55.9 1420 6.6 168 41.4 1052 29.6 751 20.3 514 17.5 445
12 100 45.0 1143 16.0 406 58.7 1491 5.5 140 42.7 1085 28.9 735 25.3 641 12.5 318
200 45.0 1143 16.0 406 60.9 1547 6.6 168 44.9 1140 29.6 751 25.3 641 17.5 445
14 100 50.0 1270 18.0 457 69.9 1775 6.6 168 51.9 1318 32.5 826 28.3 718 21.8 552
200 50.0 1270 18.0 457 85.6 2174 6.6 168 67.6 1717 51.7 1313 28.3 718 28.0 711
16 100 60.0 1524 20.5 521 75.2 1910 6.6 168 54.7 1389 32.5 826 34.0 864 21.8 552
200 60.0 1524 20.5 521 94.8 2309 6.6 168 70.4 1788 51.7 1313 34.0 864 28.0 711
18 100 68.0 1727 21.5 546 79.0 2007 6.6 168 57.5 1461 32.5 826 38.0 965 21.8 552
200 68.0 1727 21.5 546 94.8 2408 6.6 168 73.3 1862 51.7 1313 38.0 965 28.0 711

21-10
 J
E*
Mark Eight Dimensions

G
O

C
A

E0093
B E0092

Class 900/1500 Dimensions (inches / mm)

Size Actuator A B C E F G H J
(in.) Size
1
/2 -1 25 12.0 305 5.0 127 25.2 640 3.9 100 20.2 513 14.3 363 11.0 279 6.5 165
11/2 50 15.0 381 5.5 140 31.4 798 4.8 122 25.9 658 20.1 511 12.0 305 9.1 232
2 50 18.0 457 6.0 152 33.0 838 4.8 122 27.0 686 20.1 511 13.5 343 9.1 232
3 100 22.0 559 7.0 178 42.8 1087 5.5 140 35.8 909 28.9 735 15.5 394 12.5 318
200 22.0 559 7.0 178 45.0 1143 6.6 168 38.0 965 29.6 751 15.5 394 17.5 445
4 100 26.0 660 8.0 203 45.2 1148 5.5 140 37.2 945 28.9 735 17.8 451 12.5 318
200 26.0 660 8.0 203 47.5 1207 6.6 168 39.5 1003 29.6 751 17.8 451 17.5 445
6 100 35.0 889 12.0 305 52.8 1341 6.6 168 40.8 1036 28.9 735 22.5 572 17.5 318
200 35.0 889 12.0 305 55.0 1397 6.6 168 43.0 1092 29.6 751 22.5 572 12.5 445
8 100 40.0 1016 14.5 368 58.5 1486 6.6 168 44.0 1118 28.9 735 27.0 686 12.5 318
200 40.0 1016 14.5 368 60.7 1542 6.6 168 46.2 1173 29.6 751 27.0 686 17.5 445
10 100 48.0 1219 17.0 432 64.2 1631 6.6 168 47.2 1199 28.9 735 31.5 800 12.5 318
200 48.0 1219 17.0 432 66.4 1687 6.6 168 49.4 1255 29.6 751 31.5 800 17.5 445
12 100 56.0 1422 19.5 495 75.6 1920 6.6 168 56.1 1425 32.5 826 36.0 914 21.8 552
200 56.0 1422 19.5 495 91.4 2322 6.6 168 71.9 1826 51.7 1313 36.0 914 28.0 711

Class 2500 Dimensions (inches / mm)

Size Actuator A B C E F G H J
(in.) Size
1
/2 -1 25 12.0 305 5.0 127 25.2 640 3.9 100 20.2 513 14.3 363 11.0 279 6.5 165
1
/2-1 25 15.0 381 5.5 140 27.5 699 3.9 100 22.0 559 14.3 363 13.5 343 6.5 165
1 1/ 2 50 18.0 457 6.0 152 32.6 828 4.8 122 26.6 676 18.0 457 15.0 381 9.1 232
2 50 21.0 533 6.5 165 34.1 866 4.8 122 27.6 701 18.0 457 16.5 419 9.1 232
3 100 24.0 610 7.2 183 41.8 1062 5.5 140 31.2 792 28.9 735 19.0 483 12.5 318
200 24.0 610 7.2 183 48.0 1219 6.6 168 40.5 1029 29.6 751 19.0 483 17.5 445
4 100 29.0 737 8.0 203 48.1 1222 5.5 140 40.1 1019 28.9 735 21.5 546 12.5 318
200 29.0 737 8.0 203 50.3 1278 6.6 168 42.3 1074 29.6 751 21.5 546 17.5 445
6 100 38.0 965 13.0 330 56.6 1438 6.6 168 43.6 1107 28.9 735 26.5 673 12.5 318
200 38.0 965 13.0 330 58.8 1494 6.6 168 45.8 1163 29.6 751 26.5 673 17.5 445
8 100 48.0 1219 15.5 394 63.0 1600 6.6 168 47.5 1207 28.9 735 32.0 813 12.5 318
200 48.0 1219 15.5 394 65.2 1656 6.6 168 49.7 1262 29.6 751 32.0 813 17.5 445
10 100 56.0 1422 18.0 457 74.8 1900 6.6 168 56.8 1443 32.5 826 37.0 940 21.8 552
200 56.0 1422 18.0 457 90.6 2301 6.6 168 72.6 1844 51.7 1313 37.0 940 28.0 711
12 100 64.0 1626 20.5 521 81.6 2073 6.6 168 61.1 1552 32.5 826 43.0 1092 21.8 552
200 64.0 1626 20.5 521 97.3 2471 6.6 168 76.8 1951 51.7 1313 43.0 1092 28.0 711

21-11
Mark Six Dimensions

C C

Extension
Length
Extension
Length

B
E0094
A D
E0103

Class 150, 300 and 600 (inches / mm)

ANSI A B C D Disassembly
Body Globe ANSI/ISA Clearance
Size Above
(inches) Class Class Class Class Class Class
150-600 150 300 600 150 300-600 Actuator
1 8.5 216 7.25 184 7.75 197 8.25 210 1.75 44 3.80 97 4.25 108 4.25 108 6.8 173
11/2 9.5 241 8.75 222 9.25 235 9.88 251 2.31 59 3.93 100 4.75 121 4.75 121 8.9 226
2 11.5 292 10.00 254 10.50 267 11.25 286 2.25 57 4.06 103 5.75 146 5.75 146 9.1 231
3 14.0 356 11.75 298 12.50 318 13.25 337 3.39 86 5.34 136 7.00 178 7.00 178 11.3 287
4 17.0 432 13.88 353 14.50 368 15.50 394 5.22 133 6.06 154 8.75 222 8.75 222 14.1 358
6 17.75 451 5.48 139 6.04 153 8.88 226 16.1 409
6 18.62 473 20.00 508 5.75 146 8.19 153 11.00 279 18.2 462
8 21.38 543 7.08 180 6.94 176 13.00 330 20.0 508
8 22.38 568 24.00 610 7.48 190 8.75 222 13.00 330 21.8 554
10 26.50 673 8.44 214 7.37 187 21.4 544
10 27.88 708 29.62 752 8.93 227 7.37 187 21.4 544

Bonnet Extension Lengths (inches / mm)

Body
Size Extension Lengths
(inches)
1 12 305 15 381 18 457 24 610
1 1/2 12 305 15 381 18 457 24 610 30 762
2 12 305 15 381 18 457 24 610 30 762
3 18 457 21 533 24 610 30 762 36 914
4 18 457 21 533 24 610 30 610 36 914
6 24 610 27 686 30 762 36 914
8 24 610 27 686 30 762 36 914
10 30 762 33 838 36 914 42 1067

21-12
ChannelStream, MegaStream, Tiger-Tooth, Angle Body Dimensions

DISASSEMBLY
K CLEARANCE E
J

E0095

Table VI: Fabricated Angle Body Dimensions (inches / mm)

Valve Class A B E* F* J* K*
Size
150 17.0 432 17.0 432 24.0 610 55.0 1397 12.0 305 10.5 267
16 300 17.8 451 17.8 451 24.0 610 55.5 1410 12.0 305 10.5 267
600 19.3 489 19.3 489 24.0 610 57.0 1448 12.0 305 10.5 267
150 19.0 483 19.0 483 30.0 762 56.0 1422 12.0 305 10.5 267
18 300 19.8 502 19.8 502 30.0 762 57.0 1448 12.0 305 10.5 267
600 21.0 533 21.0 533 30.0 762 58.0 1473 12.0 305 10.5 267
150 20.7 526 20.7 526 33.0 838 58.5 1486 12.0 305 10.5 267
20 300 21.4 543 21.4 543 33.0 838 59.5 1511 12.0 305 10.5 267
600 22.8 578 22.8 578 33.0 838 60.5 1537 12.0 305 10.5 267
150 23.0 584 23.0 584 36.0 914 65.0 1651 12.0 305 10.5 267
24 300 23.6 600 23.6 600 36.0 914 65.0 1651 12.0 305 10.5 267
600 25.3 641 25.3 641 36.0 914 66.0 1676 12.0 305 10.5 267
150 27.1 689 27.1 689 38.0 965 75.0 1905 12.0 305 10.5 267
30 300 30.3 768 30.3 768 38.0 965 75.0 1905 12.0 305 10.5 267
600 32.0 813 32.0 813 38.0 965 76.0 1930 12.0 305 10.5 267
150 31.9 809 31.9 809 40.0 1016 80.0 2032 12.0 305 10.5 267
36 300 36.0 914 36.0 914 40.0 1016 82.0 2083 12.0 305 10.5 267
600 37.9 962 37.9 962 40.0 1016 84.0 2134 12.0 305 10.5 267

NOTE: Various inlet sizes are available for fabricated angle body valves.
Contact factory for specific sizes required. *Size 100 Cylinder assumed.

21-13
 Tek-Check Dimensions

DISASSEMBLY
E CLEARENCE
DISASSEMBLY
CLEARENCE E

FF

AA
B

E0096
A AA

Class 150, 300 and 600 (inches / mm)

A B E F AA FF
Body ANSI Globe ANSI / ISA
Size Class Class Class Class Class Class
150,300,600 150 300 600 150 300,600
1
/ 2 , 3/ 4 8.5 203 7.3 184 7.6 194 8.1 206 1.5 38 2.5 64 3.8 95 4.3 108 4.3 108 3.0 76
1 8.5 203 7.3 184 7.8 197 8.3 210 1.8 44 2.5 64 3.8 95 4.3 108 4.3 108 3.0 76
11/2 9.5 241 8.8 222 9.3 235 9.9 251 2.3 58 4.3 108 5.0 127 4.8 121 4.8 121 4.0 102
2 11.5 292 10.0 254 10.5 267 11.3 286 2.3 58 4.8 121 5.3 133 5.8 146 5.8 146 4.0 102
3 14.0 356 11.8 298 12.5 318 13.3 337 3.5 89 6.0 152 7.1 181 7.0 178 7.0 178 5.0 127
4 17.0 432 13.9 353 14.5 368 15.5 394 4.2 107 8.0 203 7.1 222 8.8 222 8.8 222 6.5 165
6 17.8 451 5.5 139 9.5 241 10.0 254 8.9 226 7.3 184
6 18.6 473 20.0 508 5.8 146 10.0 254 11.5 292 11.0 279 8.8 222
8 21.4 543 7.1 180 10.0 254 11.0 279 13.0 330 7.8 197
8 22.4 568 24.0 610 7.5 190 12.0 305 12.3 311 13.0 330 9.3 235
10 26.5 673 8.9 226 14.0 356 13.0 330 13.3 337 8.4 214
10 27.9 708 29.6 752 9.2 233 14.0 356 14.5 368 14.8 376 10.3 262
12 29.0 737 9.5 241 14.5 368 14.5 368 14.5 368 7.8 197
12 30.5 775 32.3 819 10.0 254 14.5 368 15.8 400 16.1 409 9.8 248
14 33.5 851 10.5 267 15.0 381 15.3 387 17.5 445 7.8 197
14 35.0 889 36.8 933 11.3 286 15.0 381 17.0 432 19.1 486 10.6 268

Class 900, 1500, 2500 (inches / mm)

A B E F AA FF

Body
Size Class Class Class Class Class Class Class Class Class Class Class Class Class
900,1500 2500 900,1500 2500 900,1500 2500 900 1500 2500 900,1500 2500 900,1500 2500
1 11.0 279 12.0 301 1.8 44 1.8 44 2.5 64 2.5 64 4.5 114 4.5 114 5.3 133 *Standard *Standard
11/2 13.0 330 15.0 381 2.7 68 2.4 60 4.8 121 4.8 121 7.0 178 7.0 178 7.3 184 Mark Two Mark Two
2 14.8 375 15.8 400 2.8 71 3.0 77 5.0 127 5.0 127 7.5 191 7.5 191 7.5 191 Dimensions Dimensions
3 18.1 460 26.0 660 4.2 106 3.7 94 8.0 203 8.0 203 9.9 251 9.9 251 10.3 260 9.3 235 13.0 330 7.6 194 9.1 232
4 25.0 635 29.0 737 4.4 113 5.4 138 8.8 222 8.8 222 9.8 248 9.8 248 12.4 314 12.5 318 14.5 368 9.0 229 9.8 249
6 30.0 762 34.0 864 7.2 183 7.3 184 10.5 267 11.3 288 13.0 330 14.6 372 15.8 400 13.9 353 17.0 432 11.2 284 12.3 313
8 32.8 832 40.3 1022 9.4 240 10.3 262 13.8 349 14.0 356 16.9 429 17.4 441 21.3 540 16.4 416 20.1 511 12.6 319 18.1 459
10 39.0 991 50.0 1270 11.2 284 15.0 381 15.5 394 22.0 559 22.0 559 19.5 495 25.0 635 16.4 416 19.6 498
12 44.5 1130 56.0 1422 14.0 356 15.0 381 15.5 394 22.3 565 23.3 591 25.5 648 22.3 565 28.0 711 16.3 414 19.6 498
14 49.5 1257 12.2 309 18.0 457 19.0 483 25.0 635 25.0 635 24.8 629 31.0 787 18.4 468

* Available in standard Mark Two body only.

21-14
MegaStream Diffuser Dimensions

Type GDS
Size Max C D 1 Series2 Maximum Weight
(in.) CV 150 300 600 900 E
1 36 11.0 279 3.4 1.5 3.4 1.5 3.4 1.5 3.4 1.5
D

Diameter to fit inside flange bore

2 141 17.5 445 9.3 4.2 9.3 4.2 9.3 4.2 12.9 5.9
3 313 17.5 445 18.2 8.3 18.2 8.3 22.4 10.2 31.7 14.4
4 544 32.5 826 30.6 13.9 30.6 13.9 39.5 17.9 57.4 26.0
6 1232 46.5 1181 76.0 34.5 76.0 34.5 124.0 56.2 154.0 69.9
8 2361 70.0 1778 113.0 51.3 139.0 63.0 254.0 115.2
C
10 3722 76.5 1943 173.0 78.5 337.0 152.9 453.0 205.4
12 5377 91.0 2311 249.0 112.9 508.0 230.4
14 6752 100.0 2540 319.0 144.7 662.0 300.3
16 8902 114.0 2896 413.0 187.3 761.0 345.2
18 11346 128.5 3264 597.0 270.8 1261.0 572.0
20 14100 143.0 3632 873.0 396.0 1698.0 770.2
24 20460 168.5 4280 1248.0 566.1

Type GDI
Size Max C D1 E3 Series2 Maximum Weight
(in.) CV E
150 300 600 900
1 36 11.0 279 1.3 33 3.5 89 4.1 1.9 4.1 1.9 4.1 1.9 4.1 1.9 D
2 141 17.5 445 2.4 60 4.5 114 9.6 4.4 9.6 4.4 9.6 4.4 13.2 6.0
3 313 26.0 660 3.5 89 6.6 168 22.1 10.0 22.1 10.0 26.3 11.9 35.6 16.1
4 544 32.5 826 4.5 114 8.6 219 38.7 17.6 38.7 17.6 47.6 21.6 65.5 29.7
6 1232 46.5 1181 6.6 168 12.8 324 96.6 43.8 96.6 43.8 114.0 51.7 174.0 78.9
8 2361 70.0 1778 8.6 219 16.0 406 138.0 63.0 164.0 74.4 280.0 127.0
C
10 3722 76.5 1943 10.8 273 20.0 508 209.0 94.8 373.0 169.2 489.0 221.8
12 5377 91.0 2311 12.8 324 24.0 610 296.0 134.3 555.0 251.7
14 6752 100.0 2540 14.0 356 30.0 762 391.0 177.4 734.0 332.9
16 8902 114.0 2896 16.0 406 36.0 914 510.0 231.3 858.0 389.2
18 11346 128.5 3264 18.0 457 36.0 914 690.0 313.0 1345.0 610.1
20 14100 143.0 3632 20.0 508 42.0 1067 1003.0 455.0 1828.0 829.2
24 20460 168.5 4280 24.0 610 48.0 1219 1418.0 643.2

Type GDV
E
Size Max C E 4 Series2 Maximum Weight
(in.) CV 150 300 600 900
1 36 17.0 432 3.5 89 13.1 5.9 13.1 5.9 13.1 5.9 13.1 5.9
2 141 25.5 648 4.5 114 29.6 13.4 29.6 13.4 29.6 13.4 33.2 15.1
3 313 34.5 876 6.6 168 71.1 32.3 71.1 32.3 75.3 34.2 84.6 38.4
4 544 44.0 1118 8.6 219 93.7 42.5 93.7 42.5 103.0 46.7 121.0 54.9
6 1232 55.0 1397 12.8 324 188.0 85.3 188.0 85.3 236.0 107.0 266.0 120.7
C
8 2361 80.0 2032 16.0 406 325.0 147.4 351.0 159.2 466.0 211.4
10 3722 87.0 2210 20.0 508 460.0 208.7 624.0 283.0 740.0 335.7
12 5377 104.0 2642 24.0 610 652.0 295.7 911.0 413.2
14 6752 115.0 2921 30.0 762 880.0 399.2 1223.0 554.7
16 8902 128.0 3251 36.0 914 1166.0 528.9 1514.0 686.7
18 11346 144.0 3658 36.0 914 1448.0 656.8 2112.0 958.0
20 14100 150.0 3810 42.0 1067 1978.0 897.2 2803.0 1271.4 E0105

Notes: All dimensions are in inches/mm and weights are in lbs/kg and are for estimations only.
(1) Actual diffuser diameter.
(2) Series designates pressure rating of diffuser identical to pressure rating of same class flange.
(3) Typical diameter. Pressure rating of head equal to schedule 40 pipe of same diameter.
Diffuser rating per note 2. E = 2D.
(4) Typical diameter. Actual diameter established so that exit velocity < 400 ft./sec.
See MegaStream control valve bulletin for one and two-stage MegaStream valve dimensions.
Contact factory for Tiger-Tooth attenuator and in-line silencer dimensions.

21-15
MegaStream Plate Dimensions

E0106

MegaStream Plate Dimensions (inches / mm)

Size
A B
(in.) 1 Stage 2 Stage 3 Stage 150 300 600
1
1 /2 0.8 19 0.9 22 1.5 38 3.4 86 3.8 95 3.8 95
2 0.8 19 1.3 32 1.5 38 4.1 105 4.4 111 4.4 111
3 0.9 22 1.4 35 1.9 48 5.4 137 5.9 149 5.9 149
4 0.9 22 1.4 35 1.9 48 6.9 175 7.1 181 7.6 194
6 1.3 32 1.6 41 2.4 60 8.8 222 9.9 251 10.5 267
8 1.4 35 1.9 48 2.4 60 11.0 279 12.1 308 12.6 321
10 1.9 48 2.4 60 2.9 73 13.4 340 14.3 362 15.8 400
12 2.4 60 2.8 70 3.4 86 16.1 410 16.6 422 18.0 457
14 2.4 60 2.8 70 3.4 86 17.8 451 19.1 486 19.4 492
16 2.4 60 2.9 73 3.9 99 20.3 514 21.3 540 22.3 565
18 2.4 60 2.9 73 3.9 99 21.6 549 23.5 597 24.1 613
20 2.8 70 3.6 92 4.8 121 23.9 607 25.8 654 26.9 683
24 2.8 70 3.6 92 4.8 121 28.3 718 30.5 775 31.1 791

21-16
Rotary Actuator Dimensions

DISASSEMBLY
J E CLEARENCE

F
H

S
S
O

K C

FF
SH

N
PE P
U
T

O
M

S
O

S
N R E0097

Rotary Actuator Dimensions (inches / mm)

Size C* E F FF G H J K M N P R S** Press.
(in.) (act) Conn.
25 6.7 171 6.0 152 13.1 332 16.5 420 5.6 142 1.1 29 6.5 165 6.5 166 10.0 254 9.8 248 2.6 67 6.9 176 6.8 171 1/4 NPT
50 6.7 171 8.0 203 17.2 437 23.5 598 6.7 170 2.0 50 9.1 232 7.4 188 12.0 305 10.3 260 3.4 86 9.1 230 6.8 171 1/4 NPT
100 6.7 171 11.0 279 22.9 583 N/A N/A 9.1 230 2.4 61 12.5 318 8.5 215 18.0 457 12.8 324 5.4 137 10.4 263 6.8 171 3/4 NPT
200 6.7 171 11.0 279 23.6 599 N/A N/A 9.1 230 2.4 61 17.5 445 8.5 215 18.0 457 12.8 324 5.4 137 10.4 263 6.8 171 3/4 NPT

*7.8 inches (198 mm) on size 100 and 200 actuators, 16-inch and larger valves.
**7.9 inches (202 mm) on size 50 actuators and 8, 10-inch valves; 9.4 inches (238 mm) on size 100, 200 actuators and 8,10,12-inch valves;
11.3 inches (286 mm) on size 100, 200 actuators and 16-inch and larger valves.
NOTE: Size 100 and 200 actuators do not include lifting rings.

21-17
 Valdisk Dimensions

DISASSEMBLY
J E CLEARANCE

F
T (Dia.) H
S (Seat Dia.)

S
O

S
G

B C K A
E0098

D
DISASSEMBLY
CLEARANCE

Table VII: Valdisk Dimensions (inches / mm)

Body Classes 150, 300, 600 – 2 thru 8-inch; 150, 300 – 10 thru 12-inch
(with Class 150 or 300 disc and shaft)

Actuator
Size Size Shaft A* B C D E F G H J K S T
(in.) (sq.in.) Size
2 25 0.625 1.8 44 4.3 110 11.4 288 18.3 465 6.0 152 13.1 333 5.6 142 1.1 29 6.5 165 6.5 166 1.7 43 4.0 102
2 50 0.625 1.8 44 4.3 110 11.4 288 19.1 485 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188 1.7 43 4.0 102
3 25 0.625 1.9 48 5.1 130 11.7 298 18.7 475 6.0 152 13.1 333 5.6 142 1.1 29 6.5 165 6.5 166 2.6 66 5.4 137
3 50 0.625 1.9 48 5.1 130 11.7 298 19.5 495 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188 2.6 66 5.4 137
4 25 0.750 2.1 54 5.9 151 12.4 315 19.4 493 6.0 152 13.1 333 5.6 142 1.1 29 6.5 165 6.5 166 3.7 93 6.8 171
4 50 0.750 2.1 54 5.9 151 12.4 315 20.2 513 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188 3.7 93 6.8 171
6 50 0.875 2.3 57 7.6 192 14.3 363 22.1 561 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188 5.5 141 8.5 216
6 100 0.875 2.3 57 7.6 192 14.3 363 24.5 622 11.0 279 22.6 574 9.1 230 2.4 61 12.5 318 8.5 215 5.5 141 8.5 216
8 50 1.125 2.5 64 8.6 219 16.3 415 24.1 612 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188 7.2 182 10.8 273
8 100 1.125 2.5 64 8.6 219 16.3 415 26.5 673 11.0 279 22.6 574 9.1 230 2.4 61 12.5 318 8.5 215 7.2 182 10.8 273
10 50 1.125 2.8 71 9.7 246 17.5 444 25.2 640 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188 9.2 233 12.8 324
10 100 1.125 2.8 71 9.7 246 17.5 444 27.7 704 11.0 279 22.6 574 9.1 230 2.4 61 12.5 318 8.5 215 9.2 233 12.8 324
12 100 1.500 3.2 81 11.2 283 18.7 474 28.9 734 11.0 279 22.6 574 9.1 230 2.4 61 12.5 318 8.5 215 11.0 280 15.0 381
* Face-to-face, MSS SP67 Body Only

21-18
Valdisk 150 Dimensions
DISASSEMBLY
CLEARANCE

J E

F
H

S
O

S
G

K
B C A
D E0099
DISASSEMBLY
CLEARANCE

Table VI: Valdisk 150 Dimensions (inches / mm)

Actuator
Size Size Shaft A* B C D E F G H J K
(in.) (sq.in.) Size

2 25 0.6 15 1.8 46 2.5 64 11.5 292 18.4 467 6.0 152 13.1 332 5.6 142 1.1 28 6.5 165 6.5 165
2 50 0.6 15 1.8 46 2.5 64 11.5 292 19.4 493 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
3 25 0.6 15 1.9 48 3.1 79 12.2 310 19.2 488 6.0 152 13.1 332 5.6 142 1.1 28 6.5 165 6.5 165
3 50 0.6 15 1.9 48 3.1 79 12.2 310 20.0 508 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
4 25 0.8 20 2.1 53 3.6 91 12.7 323 19.7 500 6.0 152 13.1 332 5.6 142 1.1 28 6.5 165 6.5 165
4 50 0.8 20 2.1 53 3.6 91 12.7 323 20.5 521 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
6 50 0.9 23 2.3 58 4.7 119 13.9 353 20.7 525 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
6 100 0.9 23 2.3 58 4.7 119 13.9 353 23.1 587 11.0 279 22.6 574 9.1 231 2.4 61 12.5 318 8.5 216
8 50 1.1 28 2.4 61 6.0 152 15.0 381 22.7 577 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
8 100 1.1 28 2.4 61 6.0 152 15.0 381 25.2 640 11.0 279 22.6 574 9.1 231 2.4 61 12.5 318 8.5 216
10 50 1.1 28 2.9 74 7.7 196 16.7 424 24.5 622 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
10 100 1.1 28 2.9 74 7.7 196 16.7 424 27.0 686 11.0 279 22.6 576 9.1 231 2.4 61 12.5 318 8.5 216
12 100 1.5 38 3.3 84 8.0 203 18.2 462 28.5 724 11.0 279 22.6 576 9.1 231 2.4 61 12.5 318 8.5 216

* Face-to-face, MSS SP67 Body Only

21-19
MaxFlo Dimensions

DISASSEMBLY
CLEARANCE

J E

F
H

S
O

S
G

K A
B C E0008
D
DISASSEMBLY
CLEARANCE

Table V: MaxFlo Dimensions (inches / mm)

Valve Actuator
Shaft
Size Size
Size A B C D E F G H J K
(in.) (sq.in.)
1 25 0.4 11 4.0 102 1.8 46 11.7 297 20.0 510 6.0 152 13.1 332 5.6 142 1.1 28 6.5 165 6.5 165
11/2 25 0.6 16 4.5 114 2.5 63 12.7 322 21.0 535 6.0 152 13.1 332 5.6 142 1.1 28 6.5 165 6.5 165
2 25 0.6 16 4.9 124 3.2 82 12.8 324 21.0 535 6.0 152 13.1 332 5.6 142 1.1 28 6.5 165 6.5 165
2 50 0.6 16 4.9 124 3.2 82 12.8 324 21.0 535 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
3 25 0.9 23 6.5 165 4.7 120 16.5 419 25.0 635 6.0 152 13.1 332 5.6 142 1.1 28 6.5 165 6.5 165
3 50 0.9 23 6.5 165 4.7 120 16.5 419 25.0 635 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
4 25 0.9 23 7.6 194 4.9 125 16.7 423 26.0 661 6.0 152 13.1 332 5.6 142 1.1 28 6.5 165 6.5 165
4 50 0.9 23 7.6 194 4.9 125 16.7 423 26.0 661 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
6 50 1.0 26 9.0 229 6.4 161 18.4 468 27.0 680 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
6 100 1.0 26 9.0 229 6.4 161 18.4 468 29.0 722 11.0 279 22.6 574 9.1 231 2.4 61 12.5 318 8.5 216
8 50 1.0 26 9.6 243 6.9 176 18.8 479 27.0 685 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
8 100 1.0 26 9.6 243 6.9 176 18.8 479 29.0 733 11.0 279 22.6 574 9.1 231 2.4 61 12.5 318 8.5 216
10 50 1.0 26 10.7 273 8.4 213 21.6 548 30.0 751 8.0 203 18.0 457 6.7 170 2.0 51 9.1 231 7.4 188
10 100 1.0 26 10.7 273 8.4 213 21.6 548 32.0 802 11.0 279 22.6 576 9.1 231 2.4 61 12.5 318 8.5 216
12 100 1.5 37 11.5 292 9.4 238 22.5 573 33.0 827 11.0 279 22.6 576 9.1 231 2.4 61 12.5 318 8.5 216

21-20
ShearStream Dimensions

DISASSEMBLY
CLEARANCE

J E

S
O

S
G

B K E0100 A
C DISASSEMBLY
D CLEARANCE

Table V: ShearStream Dimensions (inches / mm)

Body Classes 150, 300, and 600
Actuator
Size Size Shaft A B C D E F G H J K*
(in.) (sq.in.) Size
1 25 0.625 4.0 102 3.1 80 10.6 269 17.6 447 6.0 152 13.1 333 5.6 142 1.1 29 6.5 165 6.5 166
11/2 25 0.625 4.5 114 3.9 98 11.2 283 18.5 470 6.0 152 13.1 333 5.6 142 1.1 29 6.5 165 6.5 166
2 25 0.625 4.9 125 4.1 105 11.4 290 18.9 480 6.0 152 13.1 333 5.6 142 1.1 29 6.5 165 6.5 166
2 50 0.625 4.9 125 4.1 105 11.4 290 19.7 500 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188
3 25 0.750 6.5 165 5.0 126 12.5 317 19.5 495 6.0 152 13.1 333 5.6 142 1.1 29 6.5 165 6.5 166
3 50 0.750 6.5 165 5.0 126 12.5 317 20.3 516 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188
4 25 0.750 7.6 194 5.5 139 13.7 348 20.7 526 6.0 152 13.1 333 5.6 142 1.1 29 6.5 165 6.5 166
4 50 0.750 7.6 194 5.5 139 13.7 348 21.5 546 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188
6 50 1.000 9.0 229 7.9 200 16.0 405 23.8 605 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188
6 100 1.000 9.0 229 7.9 200 16.0 405 26.2 665 11.0 279 22.6 574 9.1 230 2.4 61 12.5 308 8.5 215
8 50 1.000 9.6 244 8.7 220 16.7 425 24.5 622 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188
8 100 1.000 9.6 244 8.7 220 16.7 425 26.9 683 11.0 279 22.6 574 9.1 230 2.4 61 12.5 318 8.5 215
8 200 1.000 9.6 244 8.7 220 16.7 425 29.4 747 11.0 279 23.6 599 9.1 230 2.4 61 17.5 445 8.5 215
10 50 1.125 11.7 297 11.1 282 17.5 444 25.2 640 8.0 203 18.0 457 6.7 170 2.0 50 9.1 232 7.4 188
10 100 1.125 11.7 297 11.1 282 17.5 444 27.7 704 11.0 279 22.6 574 9.1 230 2.4 61 12.5 318 8.5 215
10 200 1.125 11.7 297 11.1 282 17.5 444 30.2 767 11.0 279 23.6 599 9.1 230 2.4 61 17.5 445 8.5 215
12 100 1.500 13.3 338 11.8 301 18.0 456 28.3 719 11.0 279 22.6 574 9.1 230 2.4 61 12.5 318 8.5 215
12 200 1.500 13.3 338 11.8 301 18.0 456 30.8 782 11.0 279 23.6 599 9.1 230 2.4 61 17.5 445 8.5 215
16 100 2.000 15.8 400 15.1 384 26.1 663 37.2 945 11.0 279 22.6 574 9.1 230 2.4 61 12.5 318 8.5 215
16 200 2.000 15.8 400 15.1 384 26.1 663 39.7 1008 11.0 279 23.6 599 9.1 230 2.4 61 17.5 445 8.5 215

21-21
Estimated Shipping Weights Mark One Globe (lbs / kg)
Note: All shipping weights are in
pounds / kilograms and include cylin- Weight in Pounds / Kilograms Add for
der actuators and positioner. Special Size Class Class Class Class Class Class Extended
trim, accessories, actuator handwheels (inches) 150 300 600 900 1500 2500 Bonnet
and reducers may affect the weight.
1
/2 - 3/4 40 18 40 18 40 18 5 2
1 50 23 50 23 50 23 100 45 120 54 150 68 5 2
11/2 65 30 65 30 65 30 170 54 180 82 210 95 5 2
2 75 34 75 34 75 34 200 91 220 100 300 136 5 2
3 160 73 170 77 180 82 400 182 430 195 500 227 15 7
4 240 109 250 114 265 120 590 268 610 277 940 427 20 9
6 360 163 570 259 600 272 1000 454 1170 531 1400 636 40 18
8 590 268 790 359 830 377 1100 499 1320 599 1740 790 65 30
10 1050 477 1405 638 1600 726 2050 931 2200 999 2600 1180 90 41

Mark Two (lbs / kg) Mark Six (lbs / kg)

ANSI Class Add for Size ANSI Class
Size Extended
150-600 900 1500 2500 Bonnet (inches) 150 300 600
1
/2 - 3/4 85 39 90 41 90 41 100 45 5 2 1 70 32 70 32 70 32
1 90 41 95 43 95 43 110 50 5 2 11/2 85 39 85 39 85 39
11/2 155 70 190 86 190 86 195 88 10 5 2 95 43 95 43 95 43
2 170 77 205 93 205 93 210 95 10 5 3 190 86 200 91 210 95
4 275 125 285 129 300 136
3 250 113 325 147 325 147 350 159 15 7
6 400 181 610 277 640 290
4 400 181 500 227 550 227 550 227 15 7
8 640 290 840 381 880 399
10 1110 503 1465 665 1660 753
Mark Eight (lbs / kg)
Body Rating Add for
Size Class Class Class Class Extended Trooper (lbs / kg)
(in.) 150-600 900 1500 2500 Bonnet
Valve Size Weight
1 60 27 120 54 145 66 180 82 5 2 (inches) Class 150 Class 300
1 1/ 2 80 36 205 93 215 98 250 113 5 2 1 35 16 40 18
2 90 41 240 109 265 120 360 163 5 2 11/2 40 18 55 25
3 215 98 480 218 515 234 600 272 15 7 2 45 21 60 27
4 320 145 710 322 730 331 1130 513 20 9 3 120 55 130 59
6 720 327 1200 544 1405 637 1680 762 40 18 4 180 82 195 89
8 995 451 1325 601 1585 719 2090 948 65 29
* Add: 1 lbs / 0.45 kg for P/P positioner;
10 1900 862 2460 1116 2640 1197 3120 1415 90 41 3 lbs / 1.4 kg for I/P positioner.

Tek-Check (lbs / kg)

Rating
Body
Size Class Class Class Class Class Class
(in.) 150 300 600 900 1500 2500 Oversize Actuator
1
/2 - /43 25 11 25 11 25 11 Weights
1 35 16 35 16 35 16 85 39 105 48 130 59 (lbs / kg)
11/2 50 23 50 23 50 23 125 57 135 61 165 75
Original Size Oversize Add
2 60 27 60 27 60 27 150 68 170 77 250 113
3 115 52 125 57 135 61 250 113 280 127 350 159 25 50 30 14
4 195 88 210 95 220 100 440 200 460 209 790 358 50 100 90 41
6 315 143 420 191 450 204 850 386 1020 463 1250 567 100 200 125 57
8 440 200 640 290 680 308 1250 567 1700 771 2500 1134
10 900 408 1255 569 1450 658 1900 862
12 1050 476 1600 726 2200 998
14 1300 590 2350 1066 2700 1225

21-22
 Valdisk (lbs / kg) ShearStream (lbs / kg)
Valve Size Weight Valve Size Weight Valve Size (inches) Weight (lbs / kg)
1
2 40 18 14 280 127 1, 1 /2, 2 45 20
3 50 23 16 320 145 3 55 25
4 60 27 18 390 177 4 85 39
6 80 36 20 540 245 6 115 52
8 120 54 24 680 308 8 180 82
10 190 86 30 830 376 10 250 113
12 250 113 12 435 197

Valdisk 150 (lbs / kg) MaxFlo (lbs / kg)

Valve Size Wafer Body Lug Body Valve Size Flangeless Body Flanged Body
2 40 18 43 20 1 39 18 45 20
3 46 21 49 22 11/2 41 19 50 23
4 52 24 58 26 2 46 21 54 25
6 96 44 103 47 3 59 27 77 35
4 70 32 101 46
8 110 50 123 56
6 157 71 201 91
10 267 121 287 130
8 195 88 274 124
12 286 130 319 145
10 256 116 382 173
12 433 197 602 274

21-23
21-24