Scribd
Upload
51 views

Executive Summary

The automotive industry in North America uses large amounts of plastics and polymer composites. In 2016, vehicles produced in the US and Canada used 4.9 billion pounds of plastics, valued at $5.7 billion. Plastics use increased by 75 million pounds from 2015. The average vehicle now contains 332 pounds of plastics. The plastics industry supports over 61,000 jobs in the US, located across 45 states, with the largest employment in Michigan, Ohio, and Indiana. It generates an additional 117,000 indirect and induced jobs through its supply chain.

Uploaded by

Ramyaa Lakshmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views

Executive Summary

The automotive industry in North America uses large amounts of plastics and polymer composites. In 2016, vehicles produced in the US and Canada used 4.9 billion pounds of plastics, valued at $5.7 billion. Plastics use increased by 75 million pounds from 2015. The average vehicle now contains 332 pounds of plastics. The plastics industry supports over 61,000 jobs in the US, located across 45 states, with the largest employment in Michigan, Ohio, and Indiana. It generates an additional 117,000 indirect and induced jobs through its supply chain.

Uploaded by

Ramyaa Lakshmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Executive Summary

The $353 billion North American light vehicle industry represents an important sector of economy of
both the United States and Canada and is a large end-use customer market for chemistry. In 2016, the
14.65 million light vehicles assembled in the United States and Canada required some 4.9 billion
pounds of plastics and polymer composites valued at $5.7 billion, or $390 in every vehicle.

The latest data indicate that the average weight of US/Canadian light vehicles rose. In 2016, the use of
plastics in light vehicles increased by about 75 million pounds. At an average of 332 pounds of plastic
and composite per vehicle were used in 2016. Polypropylene, however, is also used in thermoplastics
polyolefin elastomers (TPO) and its use in that area is reported separately under rubber. In addition,
carbon fiber is utilized to manufacture carbon fiber reinforced plastics (CFRP) for automotive
applications. Average TPO and carbon fiber use is about 35 pounds per vehicle and if they were
included in plastics and polymer composites the total would be equivalent to about 367 pounds per
vehicle. A change in consumer preferences for larger trucks and SUVs played a role. But because of
low gas prices and the increased weight of the average vehicle, the percentage of total vehicle weight
slipped slightly (at 8.3%) in 2016. Plastics and polymer composites are still essential to a wide range of
safety and performance breakthroughs in today’s cars, minivans, pickups and SUVs. In fact, the use of
plastic and polymer composites in light vehicles has increased from less than 20 pounds per vehicle in
1960 to 332 pounds per car in 2016.

The role of plastics is actually much larger as these materials are compounded with colorant and other
additives that impart functionality and other positive attributes. The value of these additives and
compounding services along with value-added among producers of plastic automotive parts and
components bring the market for finished automotive plastics and polymer composite products up to
$20.8 billion in the United States. These automotive plastic products are produced at 1,618 plants
located in 45 states. These plants directly employ about 61,836 people and feature a payroll of $3.1
billion.

Michigan is the leading state in terms of direct employment (over 15,125) and is followed by Ohio
(over 8,758), Indiana (about 8,175), Tennessee (over 4,150), Minnesota (nearly 3,025), Pennsylvania
(nearly 2,750), Wisconsin (over 2,275), Illinois (over 2,100), North Carolina (nearly 1,700), and New
York (over 1,500).

Producers of automotive plastics and polymer composites purchase plastic resins, additives, other
materials, components and services. As a result, the contributions of plastics and polymer composites
go well beyond its direct economic footprint. The automotive plastics and polymer composites industry
fosters economic activity indirectly through supply-chain purchases and through the payrolls paid both
by the industry itself and its suppliers. This, in turn, leads to induced economic output as well. As a
result, every job in the automotive plastics and polymer composites industry generates an additional
job elsewhere in the US economy, for a total of nearly 117,000 jobs.

This year’s edition includes initial estimates of plastics and polymer composite consumption in light
vehicles for Mexico. The data are presented in appendix tables 1 and 2. Mexican light vehicle
production totaled 3.47 million units in 2016. This is up from 1.98 million units in 2006. Vehicles
assembled in Mexico tend to be smaller in size. In 2016, the Mexican market for plastics and polymer
composites in OEM light vehicles totaled 880 million pounds.
2|Page

You might also like