Scribd
Upload
38 views

Pt. SMC Pneumatic Indonesia: Revision Record

This document provides details for a warehouse lighting design project, including: - A revision record table listing details of design changes over time. - A bill of materials listing the parts, quantities, materials, and other details for the lighting design. - General notes specifying dimensions are in millimeters unless otherwise noted, edge finishing requirements, and welding specifications. - Identification that the document contains proprietary and confidential information for PT SMC Pneumatic Indonesia's warehouse lighting design.

Uploaded by

Arifin Mulia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views

Pt. SMC Pneumatic Indonesia: Revision Record

This document provides details for a warehouse lighting design project, including: - A revision record table listing details of design changes over time. - A bill of materials listing the parts, quantities, materials, and other details for the lighting design. - General notes specifying dimensions are in millimeters unless otherwise noted, edge finishing requirements, and welding specifications. - Identification that the document contains proprietary and confidential information for PT SMC Pneumatic Indonesia's warehouse lighting design.

Uploaded by

Arifin Mulia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Rev 02

REVISION RECORD
No. Sym. Description Date Signature Approved

-- -- --
-- --
--
-- -- --
Customer Approval
Approved by Approved by

Sheet 1 warehouse lighting 1 -

No. Part Name Qty Material Dimension Remarks

Proprietary and Confidential General Tolerance Process Date : 10/19/2018


This information contained in this 0 ~ 4: 0.2 Drawn by : ARIFIN
drawing is the sole property 4 ~ 16 : 0.3
of PT SMCID. Any reproduction in Checked by : ARIFIN
this part or as a whole without 16 ~ 63: 0.5
permission of PT SMCID is 63 ~ 250 : 0.7 Heat Tre't. Approved by : IWAN K
prohibited.
250 ~ 500 : 1 Hrc : ........... Project Name
General Notes: Revision
1. All dimensions are in milimeters, specified otherwise. Scale ALL PACK EXHIBIT 00
2. Break all sharp edge 0.3 x 45 . PT. SMC PNEUMATIC INDONESIA NTS
3. Welding without dimensions must be continous and Proj. Meth. Customer : - Paper Size
having leg of 0.7 min thickness at welding union. A4
File Name : warehouse lighting Drawing No. : -
D:\#Arifin\SW Lighting Warehouse\warehouse lighting\Friday, October 19, 2018 3:35:06 PM Sheet : Sheet 1/1

You might also like