New VCE and PDF Exam Dumps from PassLeader

➢ Vendor: Juniper

➢ Exam Code: JN0-647

➢ Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

➢ Question 1 – Question 20

Visit PassLeader and Download Full Version JN0-647 Exam Dumps

QUESTION 1
Your campus EX9200 core devices are highly oversubscribed on bandwidth ans reporting massive
dropped packets. To immediately address the issue, you decide to implement shaping on all
interfaces. Which action will accomplish?

A. Apply the input-shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.
B. Define a CoS input traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
C. Define a CoS output traffic control profile with the shape-rate 5G parameter and apply it to all interfaces.
D. Apply the shape-rate 5G parameter to all interfaces under the [edit class-of service] hierarchy.

Answer:

QUESTION 2
What allows non-Web enabled devices to access the network on a port configured for captive portal?

A. A MAC address white list can be configured on the switch to allow specific MAC addresses to bypass the captive
portal process.
B. LLDP can be used to query the type of device that is attempting to access the network, and predefined device
types can be allowed to bypass the captive portal process.
C. Captive portal can be configured to only prompt for credentials when HTTP or HTTPS traffic is requested on a
port to allow on-HTTP enabled devices access to the network.
D. Authentication credentials for specific devices can be preconfigured on the switch for automatic authentication.

Answer: A

QUESTION 3
You have deployed sparce-mode multicast in your network using the IGP metrics shown in the
exhibit.

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader

Which path will (*,G) traffic follow form the source to the receiver before the (S,G) state is registered?

A. Source, R1, R4, R5, R6, Receiver

B. Source, R1, R2, R5, R2, R3, R6, Receiver
C. Source, R1, R2, R3, R6, Receiver
D. Source, R1, R2, R5, R6, Receiver

Answer: B

QUESTION 4
You are troubleshooting an OSPF adjacency issue between R1 and R2. What is the reason for the
ExStart state shown in the exhibit?

A. R2 was elected as the designated router.

B. R1 was elected as the backup designated router.
C. R1 and R2 are using the same IP address.

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader
D. The MTU is not the default on R1 and R2.

Answer: C

QUESTION 5
Router R1, in peer AS 65001, advertises routes to R2 using EBGP. R2 advertises the routes
learned from R1 to R3 using IBGP. Referring to the exhibit, to which routers will R3 advertise the
BGP routes received from R2?

A. R6, R7
B. R4, R5, R6, R7
C. R4, R5
D. R2, R4, R5, R6, R7

Answer: C

QUESTION 6
Referring to the exhibit, which statement is true?

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader

A. R1 is an ASBR.
B. R1 has the 8 bit set.
C. R1 is a backbone router.
D. R1 is an ABR.

Answer: A

QUESTION 7
Which two statements are true about PIM source-specific multicast (SSM)? (Choose two.)

A. The receiver DR builds a source-base tree to the RP.

B. (S,G) is always used.
C. A Different group address must be used by each source.
D. IGMPv3 is required.

Answer: BD

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader

QUESTION 8
You are configuring MSTP to prevent loops in your Layer 2 network. After applying the configuration,
you notice that MSTO is not working correctly. Referring to the exhibit, what is causing the problem?

A. Too many VLANs have been defined.

B. Context identifier must be specified.
C. MSTI-to-VLAN mappings must be the same.
D. Incorrect revision number is used.

Answer: C

QUESTION 9
A customer on MSTI-2 was isolated due to a physical link outage on Switch 5's ge-0/0/32 interface.
Referring to the exhibit, which corrective action would solve this problem?

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader

A. Replace the link between Switch 5 and Switch 6 with a 10 Gbps link.
B. Implement the CIST on all switches.
C. Move the root bridge for MSTI-2 to Switch 6.
D. Add MSTI-2 to all interfaces on Switch 5.

Answer: D

QUESTION 10
Which two statements about MVRP are correct? (Choose two.)

A. MVRP monitors interfaces using VSTP and dynamically creates VLANs as necessary.
B. MVRP PDUs are sent to other switches as periodic intervals.
C. MVRP can propagate dynamic VLANs created on one switch to another switch.
D. MVRP is enabled by adding trunk ports under the [edit protocols mvrp] hierarchy.

Answer: BD

QUESTION 11
Which three databases are used by the Dijkstra algorithm? (Choose three.)

A. Tree database
B. Link State database
C. Candidate database
D. MAC database
E. Configuration database

Answer: ABC

QUESTION 12
A customer requires that the switch responds to an ARP request only if the source and target IP
address are on different subnets. Referring to the exhibit, how would you accomplish this task?

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader

A. Create a static ARP entry for the host.

B. Enable the no-gratuitous-arp request command under the interface hierarchy.
C. Remove the proxy ARP setting and clear the entry.
D. Change the proxy ARP parameter setting to restricted.

Answer: D

QUESTION 13
A customer needs to pass Layer 2 protocols between sites. Which protocol or standard would be
required to implement connectivity on EX4300, EX3400, and EX2300 devices?

A. Q-in-Q
B. IGMP
C. VPLS
D. OSPF

Answer: A

QUESTION 14
Referring to the exhibit, how is R1 learning the route from R2?

A. R2 has interface ge-0/0/2 configured in another area under OSPFv3.

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader
B. R2 has an export policy with external type 1 configured.
C. R2 has interface ge-0/0/2 configured as a passive interface under OSPFv3.
D. R2 has an export policy with external type 2 configured.

Answer: B

QUESTION 15
You have deployed the access control configuration to the distribution switch. Referring to the
exhibit, which statement is true?

A. All hosts connected to the access switch will have access to the work after one device authenticates.
B. All hosts connected to the access switch require authentication to access the network.
C. Only the first host to authenticate will have access to the network, other hosts will be blocked.
D. All hosts connected to the access switch will have access to the network without authentication.

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader

Answer: C

QUESTION 16
Which statement is correct about MSTP?

A. MSTP enables mapping multiple independent spanning-tree instances onto one physical topology.
B. MSTP enables dynamic discovery of Layer 2 neighbors.
C. MSTP dynamically manages VLAN registration in a LAN.
D. MSTP uses stacked VLAN tags to extend a Layer 2 Ethernet connection between multiple sites.

Answer: A

QUESTION 17
You have configured 802.1X single supplicant mode on the access switch. The VoIP phone does
not support 802.1X authentication. Referring to the exhibit, which statement is true?

A. MAC bypass must be configured for the VoIP phone for this solution to work.
B. Authentication must be changed to multiple supplicant mode for this solution to work.
C. The VoIP phone will be able to communicate over the network after the workstation authenticates.
D. The VoIP phone will not be able to communicate over the network.

Answer: C

QUESTION 18
You configured static mode power management on an EX4300 to provide PoE power to telephone
and access point equipment. Which statement is correct regarding the PoE power budget?

A. Power is budgeted to devices on a first come, first served basis as devices are connected.
B. The power budgeted will be based on the device class connected to each port.
C. Power is budgeted to a port even if no device is connected to the port.

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader
D. The power budgeted to ports will adjust to how much power a device actually uses.

Answer: C

QUESTION 19
What information must you gather from the satellite device to provision a Junos Fusion Enterprise
deployment on the aggregation device? (Choose two.)

A. MAS address
B. Serial number
C. Software version
D. Model number

Answer: AB

QUESTION 20
You have just configured on an OSPF adjacency between two routers. After you commit the
configuration, you notice that your adjacency is not up. Referring to the exhibit, what would cause
the problem?

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html
 New VCE and PDF Exam Dumps from PassLeader

A. You must configure lo on R2.

B. You must configure hello and dead intervals on R1.
C. You must configure an interface-type on R2.
D. You must configure bfd on R2.

Answer: C

Visit PassLeader and Download Full Version JN0-647 Exam Dumps

JN0-647 Exam Dumps JN0-647 Exam Questions JN0-647 PDF Dumps JN0-647 VCE Dumps
https://www.passleader.com/jn0-647.html