HYDRAULIC

HiTEC® 523F
Anti-wear Hydraulic Additive Package

Low Zinc Additive, with Denison HF-0 Performance

 HYDRAULIC

HiTEC® 523F Antiwear Hydraulic Additive Package

Low Zinc Additive, with Denison HF-0 Performance

Application
HiTEC® 523F additive is a low zinc antiwear hydraulic package meeting HiTEC® 523F Based Oil Versus Several Commercially Available
Competitor Products in the ASTM D2619 Hydrolytic Stability Test
Denison HF-0 requirements. HiTEC® 523F contains a defoamant system
which is designed to work in Group I & II base oils.
1.2

Copper wt. loss, mg/cm2

Key Performance Benefits 1

HiTEC® 523F additive is a low zinc anti-wear hydraulic package, delivering 0.8

the following benefits:  0.6

• Denison HF-0, HF-1, HF-2 approval based on performance in the T6H20C 0.4
Denison limit for
hybrid pump test CU wt. loss
0.2
• Meets the requirements of DIN 51524 part II 4a 1a 2b
0 1b
• FZG A/8.3/90 load stage 10 Pass Hi T Co m Co m Co m
EC ® pe pe pe
• Filterability in the presence of water Product Tested 523
F
t i to
r Fa
t i to
rB
t i to
r Fa
mi mi
• Protection of yellow metals in the presence of water ly A
1
ly A
2
• Robust oxidation, rust and corrosion protection
• Approved against Cincinnati Machine P-68, P-69 and P-70 specifications
• Excellent wear protection demonstrated by performance in the ISO
20763 (Conestoga) vane pump test

Recommended Dosage
Afton Chemical’s HiTEC® 523F Antiwear Technology has Top
The recommended dosage for HiTEC® 523F additive is 0.6% wt. Performance Even in the Presence of 1% Water
Please contact your Afton Chemical representative for specific
recommendations.

Typical Characteristics
Appearance Brown oily liquid
Density @ 15°C, g/ml 0.987
Viscosity @ 40°C, cSt 70
Flash Point, °C (PMCC) 100 min.
Zinc, % wt. 3.32 DENISON T6H20C Vane Pump Cam Ring
Phosphorus, % wt. 2.61

Handling Information
Max Handling Temp: 75°C
Shelf Life: 24 months @ ambient temperature

© 2011. Afton Chemical Corporation is a wholly-owned subsidiary of NewMarket Corporation (NYSE:NEU). HiTEC® is a trademark of Afton Chemical Corporation. 07/11.
The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use
are beyond our control. Afton Chemical Corporation and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing
contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.