Scribd
Upload
507 views

Coefficient of Thermal Expansion

coefficient of thermal expansion

Uploaded by

Daniel Espina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
507 views

Coefficient of Thermal Expansion

coefficient of thermal expansion

Uploaded by

Daniel Espina
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 3
sw20r2018 Thermal Conductviy Thermal Conductivity Material ‘Thermal conductivity || Thermal conductivity (cal/see)/(em? Cfem) (Wim K)* [Diamond “ 1000 Silver LOL 406.0 [Copper 0.99 385.0 |Gold 314 [Brass 1 109.0 |Aluminum 0.50 205.0 Tron 0.163 79.5 Steel “ 50.2 Lead 0.083 34.7 Mercury 83 Ice 0.005 16 [Glass,ordinary 0.0025 08 |Concrete 0.002, 08 Water at 20° C 0.0014 0.6 | Asbestos 0.0004 0.08 [Snow (dry) 0.00026 . |Fiberglass 0.00015 0.04 |Brick,insulating 0.15 |Brick, red se 0.6 |Cork board 0.00011 0.04 |Wool felt 0.0001 0.04 |Rock wool 0.04 [Polystyrene (styrofoam) 0.033 [Polyurethane a 0.02 | Wood 0.0001 0.12-0,04 [Air at 0° C 0.000057, 0,024 |Helium (20°C) 0.138 [Hydrogen(20°C) 0.172 [Nitrogen(20°C) 0.0234 [Oxygen(20°C) 0.0238 Silica aerogel 0.003 Physics Iitpitmyperphysics-phy-astrgsu.ecumnbaserTablesthren hm! Most from Young, Hugh D., University Physics, 7th Ed, Table 15-5. Values {for diamond and silica aerogel from CRC Handbook of Chemistry and Index’ Tables Reference Ch 15. 18 ‘sweo018 Thermal Conductivity [Note that 1 (cal/sec)/(em? C/em) = 419 Wim K. With this in mind, the two lcolumns above are not always consistent. All values are from published lables, but can’t be taken as authoritative. [The value of 0.02 W/mK for polyurethane can be taken as a nominal figure lwhich establishes polyurethane foam as one of the best insulators. NIST published a numerical approximation routine for calculating the thermal |conductivity of polyurethane at wml . Their calculation for freon filled polyurethane of density 1.99 lb/ft? at 20°C gives a thermal |conductivity of 0.022 W/mK. The calculation for CO, filled polyurethane of |density 2.00 Ib/ft? gives 0.035 W/mK Heat conduction discussion [Debye Temperature and Thermal Conductivity| _HyperPhysics***** Thermodynamics Go Back Wiedemann-Franz Ratio |The ratio between thermal and electrical conductivities of metals can be lexpressed in terms of the ratio: Ls 2.45 x 10-SWOQ/K? |which may be called the Wiedemann-Franz Ratio or the Lorenz constant. Ind index Metal i/o (10° 8WOVK2) ‘Table. Cu 2.23 - Ike aI Reference |Au 2.35 Section Zn 231 B2 Cd 2.42 ‘Sn 2.52 (Mo 2.61 Pb 2.47 Pt 2.51 Wiedemann-Franz Law Iitpitmyperphysics-phy-astrgsu.ecumnbaserTablesthren hm! 28 ‘202018 || HyperPhysics***** Thermodynamics Thermal Conductviy ||Go Back Iitpimyperphysics-phy-astrgsu.ecumnbaserTablesthren hm! 38

You might also like